Machine Operator Quality Control
Resume:
GLENN ERIC B. NATAÑO
FACTORY WORKER / MACHINE OPERATOR
Address : *** ******* *****, ***** ******
Mobile # : +63-956-***-**** / +63-966-***-****
Email : ***********@*****.***
Professional Summary
6+ years of experience as a Machine Operator. Looking to obtain a challenging and rewarding opportunity that utilizes my knowledge and skills to enhance an organization's growth and profitability.
Soft Skills: Hard Skills:
Teamwork Machine Operation
Time Management Assembly Line
Problem Solving Quality Control
Communication Safety Procedures
Organizational Forklift Operation
Adaptability Power Tools
Detail Oriented Precision Measurement
Self-Motivated Troubleshooting
Interpersonal
Mechanical Ability
EMPLOYMENT HISTORY
Factory Worker/Assembly Operator
November 30, 2014 to March 2017
(TGB) Taiwan Golden Bee Co.ltd
#15 Yonggong 2nd Rd. Yong'an Dist.Kousiung City
Job Responsibilities
●Prepared minimum standards for work involving production machinery and provided guidance and support to staff responsible for installation, operation, and machine maintenance.
●Responsible for the safe setup and operation of manufacturing equipment in accordance with daily work orders.
●Responsible for quality control and production procedures to maintain customer loyalty.
●Ability to consistently work at a fast pace two year experience directly handling parts including bolts, nuts, washers, and fasteners
●Ability to operate an IMT (Industrial Mobile Trolley).
●Ability to operate a forklift.
●Assemble, install, and operate machines and products.
●Using written and verbal instructions, perform necessary tasks.
●Direct, coordinate, and supervise assemblers, inspectors, helpers, and others engaged in assembling products.
●Conduct routine inspections of completed assemblies.
●Prevent accidents and comply with safety regulations.
●Maintain required records of production, including cost of production, time, labor, materials used, and defective parts.
●Keep abreast of new techniques, designs, and developments in assembly industry.
Machine Operator
December 6, 2004 – May 5, 2005
Dunlop Slazenger Group
Bataan Economic Zone Mariveles
Job Responsibilities
●Clean the machine and surrounding work areas to ensure the housekeeping and safety of the plant.
●Operate machines as assigned and assist co-workers at other workstations as needed. Perform any work deemed necessary by the supervisor.
●Identify, properly contain, and label scrap/purging.
●A Machine Operator is responsible for monitoring, maintaining and operating warehouse equipment.
●Responsible for cleaning and quality-checking their machinery to ensure everything works as it should.
●Machine operators take care of all machine-specific functions such as configuring the equipment, molding and operating the machines, and optimizing the machine capability.
●They need to ensure that the machine works at its full capacity, oversee its maintenance, and perform timely quality checks.
Machine Operator
August 14, 2004 – November 26, 2004
LE ‘ CHRISTINE OF MANILA, INC.
Phase II Bataan Economic Zone,
Mariveles Bataan.
Job Responsibilities
●Take care of all machine-specific functions such as configuring the equipment, loading and operating the machines, and optimizing the machine capability.
●They need to ensure that the machine works at its full capacity, oversee its maintenance, and perform timely quality checks.
●They should be a self starter and should be willing to undergo training if need be, to understand the operations of new equipment.
●Production focuses on the process of combining various material inputs to make something for consumption.
●Job roles in this area concern the manufacturing process, quality assurance, supervising, maintenance, etc.
●Hands on experience with machine operating and production lines.
●Learning how to operate different machines and processes involved with the production.
●Learn on the job regarding the best practices in the industry.
●Calibrate the machine before the production begins.
●Ensure the machines are regularly checked and cleaned.
●Monitor and control the machine performance and settings.
●Regularly conduct tests of the machines performance and operating capacity.
●Fix any issues or malfunctions that may occur.
●Check the output of the machines and identify any issues.
●Keep an updated database on all of the machines information, defective units and final products.
●Maintain a log of the activity.
●Regularly submit performance reports.
Machine Operator
February 2, 2004 – June 2, 2004
Supreme Packaging, INC.
Mariveles, Free Trade Zone Bataan
Job Responsibilities
●Performing safety checks on equipment to ensure that it is functioning properly before production begins.
●Inspecting slitting machinery for defects and making repairs as needed.
●Installing new equipment or machinery, including programming computers and troubleshooting problems with existing equipment.
●Reading drawings or other instructions to determine the number of sheets that will be produced by a run, and adjusting settings accordingly.
●Monitoring equipment operation to ensure that it continues to run smoothly, efficiently, and safely.
●Maintaining logs of production cycles and equipment maintenance activities.
●Operating slitting machines by using hydraulic controls to start and stop equipment and to adjust blade height and tension settings.
●Observing gauges to monitor cutting speed, tension settings, blade alignment, and blade sharpnessInstalling, operating, monitoring, maintaining, and repairing equipment used to cut up large rolls of material into smaller rolls
●Operator's primary responsibility is to produce a quality product in a safe, productive and profitable manner following.
●Production Run instructions.
●The Slitter Operator also functions as the team leader and is responsible for guiding the slitting crew throughout the operational processes.
Hydra Operator
August 6, 2002 – September 25, 2003
Bataan 2020 INC.
Roman SuperHighway Bataan
Job Responsibilities
●Essential duties and responsibilities are as follows, other duties may be assigned.
●Remove products from the press and process them for shipment or transfer to finishing department.
●Operate machinery and equipment used in the manufacture of products.
●Read and follow operating manuals; work instructions, master samples, process alerts and procedures.
●Follow established documentation for producing manufactured product.
●Perform in-process inspection of all parts and/or assemblies in accordance with the requirements stated in the job packet (work instructions) or as otherwise stated on drawings or master sample.
●Perform the essential functions of the job within acceptable and safety/ environmental regulations, quality, productivity and performance standards as outlined in plant policies, procedures and applicable work instructions.
●Perform visual and gauge inspection, and complete required forms.
●Involvement in our Continuous Improvement and Safety initiatives.
●Clean the machine and surrounding work areas to ensure the housekeeping and safety of the plant.
●Operate machines as assigned and assist co-workers at other workstations as needed.
●Perform any work deemed necessary by the supervisor.Identify, properly contain, and label scrap/purging.
●Perform any secondary processes.
●Perform rework as necessary.
●Clean work cell during shift and before shift change.
●Follow all safety policies and procedures.
●Live our core values.
PAINTER
Industrial/Commercial
November 11, 2019 up to current
AS MACHA CONSTRUCTION TRADING
216 Fatima Subdivision Sapa Calaguiman Samal Bataan.
PAINTER / PLASTERER / JOINTER
Freelance Contractor
Nov 2019 to Jun 2017
SPRAY PAINTER
November 30, 2014 to March 2017
(TGB) Taiwan Golden Bee Co.ltd
No.15 Yonggong 2nd RD.Yong'an Dist.Kousiung City Taiwan
PAINTER HELPER
August 6, 2012 to June 30, 2014
Freelance
Crew Trainer
May 7, 2011 to May 7, 2012
McDonalds Riyadh International Holding Trdg. & Contg. Corp.
RIYADH, KINGDOM OF SAUDI ARABIA
Waiter
May 18, 2009 – June 29, 2010
LOU-IS Resort and Restaurant
Capitol Road Balanga City
Cashier
May 30, 2005 – January 4, 2009
Vhey’s Barber Shop
Wawa Abucay, Bataan
Exams Passed:
TESDA Passer (Written and Actual)
April 24, 2009
Massage Therapy
Certificate No. 090***********
TESDA Passer (Written and Actual)
October 11, 2003
Automotive Mechanic (Light Duty)
Certificate No. 010********
Scholarship:
Massage Therapy NC II
500 hours
SEMINAR TRAINING ATTENDED:
PHILIPPINE ASSOCIATION OF SERVICE EXPORTERS,INC.(PASEI)
November 7 2014
5th floor., UNLAD Condo.,1665 Gen. Malvar St.St.cor.St.cor.Taft avenue.,Gen. Malate, Manila
tel. Nos:5280315/5231878 fax:5280324
SIASAT MOTOR SHOP
Monark Subdivision Tuyo
Balanga, City Bataan
From Nov. 19 2001-Feb. 28, 2002
Industrial Basic First Aid
9-11 June 2003
Basic Life Support-(CPR) Cardiopulmonary Resuscitation
12-13 June 2003
Massage Therapy NC II (TESDA)
27 April 2009
Brgy. Camaya Mariveles Bataan
MIDTOWN TRAINING CENTER CORPORATION
“Integrated Workshop For Hotel And Restaurant Services”
At MidLand Plaza Condominium, M. Adriatico St., Ermita Manila
Pinoy Pamilya Club
2897 F.B Harrison Cor. Cuneta Ave. Pasay City
July 26 27 28 2010
Waiter & Housekeeping
Aug. 5, 2010 to Sept. 5, 2010
Advancement of Workers Awareness Regarding Employment (AWARE)
25th of April 2011
YHMD Intl. Manpower Service
Special Crew Seminar (SOC)
25th of October 2011
McDonalds Training, Learning & Development Center
Riyadh Saudi Arabia (KSA)
Personal Data:
Date of Birth : June 26, 1982
Place of Birth : Samal, Bataan
Passport # : EC P0014840B
SSS # : 02-18993462
Height : 5’7
Weight : 170 lbs.
Religion : Roman Catholic
Citizenship : Filipino
Civil Status : Married
Languages : Tagalog and English
EDUCATIONAL ATTAINMENT:
College
Bataan Polytechnic State College
Yr. Grad. May 2000-March 24, 2002
Automotive Mechanics
City of Balanga, Bataan
Secondary
Samal National High School
Yr. Grad. 1995-1999
Ibaba Samal, Bataan
Elementary
Samal South Elementary School
Yr. Grad. 1989-1995
Sta. Lucia Samal, Bataan
Character References
Engr. Alfredo S. Macha
Owner / Manager
Mobile#: +639*****-***
Sapa Samal Bataan
Geraldo P. Brillantes
Artist Painting
Bubuyog Ibaba Samal, Bataan
Mark Alansalon
Lead Man Painter
Floodway
San Andres, Cainta Rizal
I hereby certify that the above information is true and correct to the best of my
knowledge and belief.
Glenn Eric B. Nataño
Applicant’s Signature
Contact this candidate