JOSEPH JR CAMARISTA REGALARIO

Electrical and Instrument QAQC Inspector

Saudi Aramco SAP Number: 70019903

T-BOSIET Opito Certified

Quality Care Bldg. Liwa St. Abu Dhabi City, Abu Dhabi U.A.E

Philippine Passport No.: P7273548A

Email Add: adzvy0@r.postjobfree.com

Skype: josephregalario

Mobile No: +971-*********

A result oriented professional with more than 10 years of experience in Oil and Gas Petrochemical Project life cycle with thorough working knowledge of National Electrical Code (NEC/NFPA 70), Saudi Aramco Engineering Standards, ADNOC, Instrument Society of America (ISA) and equivalent standards, implementing of the QC plan, QC procedure based on the client specification & scope of work. Review of client specification and drawings for Site Implementation and inspection as per QCP/ITP for Construction and Materials of Instrument System according to Project Quality Plan (PQP). A consistent level of success has been achieved through diligence, being efficient, responsible to the assigned task and good communication skills.

WORK EXPERIENCE

Position: E&I QA/QC INSPECTOR

Company: Adyard Abu Dhabi LLC

Duration: April 2021- present

Project: Pipeline Surveillance System & Upgradation of Telecom Network (SDH)& F & G System

Client: ADNOC Gas Processing

Location: Western Region, Abu Dhabi U.A.E

Job Description:

•Prepares and draft E&I QCP ITP procedure, inspection test report, in accordance with project specifications and relevant standards to be reviewed and approved by Company to be implemented at the course of the project.

•Responsible in overall implementation of electrical and instrumentation QC activities in accordance with project specifications and engineering standards.

•Review drawings and documents for revision to be Issued for Construction, RLM and As Built Drawing.

•Monitor construction work for conformance with the contract specifications, approved drawings and work plans.

•Attends FAT of Equipment and Materials prior to release and delivery to site.

•Material Receiving Inspection of Fiber Optic Cables, F&G Cabinet, F&G devices CCTV unit and accessories, record any non-conformity and damaged.

•Conduct Inspection for Installation of DC/UPS System, Solar Power Distribution Boards, Fire & Gas System, Perimeter Intrusion detection System, SDH System.

•Installation Inspection of Fire and Gas Detectors and sensors, H2S gas detectors, Combustible Gas Detectors, Horn and Beacon, CCTV unit, PIDS.

•Fiber Optic Cable, Power Cable, Control and Instrument Cable Laying Inspection, Termination Inspection, Continuity and IR Test, OTDR Test.

Position: E&I QA/QC INSPECTOR

Company: Adyard Abu Dhabi LLC

Duration: September 2020- April 2021

Project: Topside Modification Gas Lift Oil Project

Client: Abu Dhabi National Oil Corporation (ADNOC Offshore)

Location: Upper Zakum Field(Offshore), Abu Dhabi U.A.E

Job Description:

•Responsible in overall implementation of quality control electrical and instrumentation activities in accordance with project specifications and engineering standards.

•Monitor construction work for conformance with the contract specifications, approved drawings and work plans in coordination with vendor and engineering.

•Conduct Inspection for Installation of DC UPS System, Power Distribution Boards, Fire & Gas System, Chemical Injection Skids, Field instruments.

•Installation Inspection of Fire and Gas Detectors and sensors, H2S gas detectors, Combustible Gas Detectors, Horn and Beacon.

•Conducts Installation Inspection of Cable Tray and conduit System as per NEMA.

•Power Cable, Control and Instrument Cable Laying Inspection, Termination Inspection, Continuity and IR Test. High Pot Testing for MV and LV cables as per Specifications.

•Prepare and review Loop Folder for Pre-Commissioning and Commissioning of Fire & Gas system devices and Field Instruments for DCS and ESD System.

•In charge in Instrument Hot Loop Checking of Fire and Gas Instrument and Field Instruments.

•Prepares and Approved As built Drawing to be Redline Marked up and to be submitted as Final Approved Drawings

•Prepare and Review documents to be compiled as Manufacturer's record Book to be submitted to Client as per project requirements.

Position: E&I QA/QC INSPECTOR

Company: TOZZI Sud

Duration: January 2020- July 2020

Project: Bab Integrated Facilities Project (Power Supply Skids)

Client: Abu Dhabi National Oil Corporation (ADNOC)

Location: ASMEF, ICAD-II Mussafah, Abu Dhabi U.A.E

Job Description:

•Responsible in overall implementation of quality control electrical activities in accordance with project specifications and engineering standards.

•Monitor subcontractor work for conformance with the contract specifications, approved drawings and work plans in coordination with vendor and engineering.

•Conduct Material Receiving Inspection, Installation Inspection of Switchgear, Transformer, DCS Cabinet, Fire Alarm Control Panel, HVAC Panel, Lighting and small Power Distribution Boards, Cathodic Protection Rectifier, as per approved Quality Control Procedure and Inspection & Test Plans.

•Installation Inspection of Fire and Gas Detectors and sensors, H2S gas detectors, Combustible Gas Detectors, Horn and Beacon.

•Installation Inspection of Cable Tray and conduit System as per NEMA.

•Power Cable, Control and Instrument Cable Laying Inspection, Termination Inspection, Continuity and IR Test. High Pot Testing for MV and LV cables as per Specifications.

•Earthing bus bars, Lightning Protection, and earthing cable Installation, MCT installation Inspection.

•Prepare and review checklist applicable for Inspection activity to be attached in preparation for Factory Acceptance Test.

Position: E&I QA/QC INSPECTOR

Company: National Petroleum Construction Corporation (NPCC)

Duration: August 2019- January 2020

Project: Long Term Agreement for Offshore Facilities of Saudi Aramco

Client: Saudi Arabian Oil Company (Saudi Aramco)

Location: NPCC Yard Mussafah, Abu Dhabi U.A.E

Job Description:

•In charge of Quality Inspection in Construction and Fabrication of Production Deck Modules for Saudi Aramco project from construction to start up and Load out.

•Witness Calibration and bench Testing of Instruments like PIT, PDT, and TIT as per instrument specifications prior to installation.

•Prepare and Submit Request for Inspection (RFI), Notification of schedule and timing of inspection thru NEAS. Witness and Hold point inspections as per approved Quality Control Procedure and Inspection & Test Plans.

•Installation Inspection and Pre commissioning of Fire and Gas Detectors, H2S detectors, Combustible Gas Detectors, Horn and Beacon.

•Installation Inspection of Cable Tray Installation from DCS to Field JB prior to Cable Pulling and Termination.

•Installation Inspection and Testing of Instruments, Instrument cable IR test, Tubing Leak Test.

•Issue and record NCR and Proactive Report for nonconformance of work quality and violation in project requirements. Nonconformance to be discussed, what the root cause is, and recommended action to be implemented to prevent recurrence.

•Monitor and verify through surveillance of work in instrument equipment installation, hook-up, loop checking and functional testing are in compliance with the technical requirements for the project.

•Prepare HSE Observation Report any unsafe act, incident, and near miss happen in work site as Safety is everybody’s responsibility.

Position: INSTRUMENT QA/QC INSPECTOR

Company: JGC/DAEWOO Engineering and Construction, Ltd.

Duration: May 2017- March 31 2019

Project: Jazan Refinery and Terminal Project EPC-12

Client: Saudi Arabian Oil Company (Saudi Aramco)

Location: Jazan Jizan City K.S.A

Job Description:

•Material Receiving Inspection of Instrument Package Units such as DCS Marshalling Cabinets, ESD Cabinets Mechanical Skids, and loose instrument items, prior to installation on site.

•Analyzer Shelters and analyzer inspection activity, material receiving, installation inspection, termination inspection, IR tests.

•Regular Surveillance Inspection, proper monitoring of construction, fabrication and subcontractor’s performance as per Saudi Aramco Engineering standards.

•In charge in Popping Test of PZV’s in coordination with Proponent representative.

• Inspection and Witness of Subcontractor’s notice of Inspection, Testing as specified in Saudi Aramco approved Inspection and Test Plan (SATIP).

•Review and Submit Request for Inspection (RFI) by Subcontractor, Notification of schedule and timing of RFI with client PID thru QMIS.

•Attend to Witness and Hold point inspections as per approved Inspection & Test Plans.

•Monitor and verify through surveillance of work in instrument equipment installation, hook-up, loop checking and functional testing are in compliance with the technical requirements for the project.

• Maintaining Status Report to identify Contractor and subcontractors required inspection and test for each system, its schedule, completion and any nonconformance generated during inspection and tests.

•Report non-conformities and disposition follow-up on corrective actions.

• Identify quality problems and areas of non-conformances, Initiate, recommend and substantiate corrective actions based on Schedule Q.

• Inspection Status Report shall be kept, and available for client's review.

Position: INSTRUMENT QA/QC INSPECTOR

Company: GS Constuction Arabia, Ltd.

Duration: October 2016- April 2017

Project: Rabigh Phase II Refining and Petrochemical Project

Client: Aramco Overseas Company B.V & Sumitomo Chemical Co. Ltd.

Location: Rabigh Industrial Rabigh City K.S.A

Job Description:

•Regular Surveillance Inspection, proper monitoring of construction, fabrication and subcontractor’s performance as per SAES.

•Report non-conformities and disposition follow-up on corrective actions.

• Identify quality problems and areas of non-conformances, Initiate, recommend and substantiate corrective actions based on Schedule Q.

• Inspection and Witness of Subcontractor’s notice of Inspection, Testing as specified in Saudi Aramco approved Inspection and Test Plan (SATIP).

•Review and Submit Request for Inspection (RFI) by Subcontractor, Notification of schedule and timing of RFI with client PID.

•Attend to Witness and Hold point inspections of approved Inspection & Test Plans.

•Attend to witness system FAT in supplier shop and SAT during pre-commissioning.

•Monitor and verify through surveillance of work in electrical and instrument equipment installation, hook-up, loop checking and functional testing are in compliance with the technical requirements for the project.

• Maintaining Status Report to identify Contractor and subcontractors required inspection and test for each system, its schedule, completion and any nonconformance generated during inspection and tests.

• Inspection Status Report shall be kept, and available for clients review.

Position: INSTRUMENT QA/QC INSPECTOR( Saudi Aramco Approved)

Company: SK Engineering and Construction

Duration: May 2014- September 2016

Project: Saudi Aramco Wasit Gas Plant Project Package-1

Client: Saudi Aramco

Location: Wasit Gas Plant Khursaniyah, Jubail K.S.A

Job Description:

• Regular Surveillance Inspection, proper monitoring of construction, fabrication and subcontractor’s performance as per SAES.

• Identify quality problems and areas of non-conformances, Initiate, recommend and substantiate corrective actions based on Schedule Q.

• Inspection of incoming equipment and materials for damage and conformance to all applicable requirements, prior to release to be used as part of work.

• Work and Inspection Schedules in maintaining materials Handling, Storage and preservation.

• Document and audit Testing and measuring equipment used for activities Controlling quality to identify with instructions for their use, validity, calibration and storage.

• Inspection and Witness of Subcontractor’s notice of Inspection, Testing as specified in Saudi Aramco approved Inspection and Test Plan (SATIP).

• Review and Submit Request for Inspection (RFI) by Subcontractor, Notification of schedule and timing of RFI with Saudi Aramco PID.

• Ensure that test pre requisites have been met, test equipment’s

availability and that the necessary inspections are performed.

• Maintaining Status Report to identify Contractor and subcontractors required inspection and test for each system, its schedule, completion

and any nonconformance generated during inspection and tests.

• Inspection Status Report shall be kept, and available for clients review.

Position: ELECTRICAL & INSTRUMENT QA/QC INSPECTOR

Company: Samyoung Corporation- Abu Dhabi

Duration: June 2012- December 2013

Project: Shah Gas Development Utilities and Offsite Package-4

E.P.C Samsung Engineering & Construction, Ltd.

Location: Shah, Abu Dhabi U.A.E

Job Description:

• Prepare RFI all Inspection activities, examinations and tests as per QCP/ITP.

• Installation Inspection of Marshaling Cabinets (DCS, ESD, FGS, FOPP, Power

Panel, Consoles, and Engineering Workstations.)

• Inspection of instrument installation (PT, TT, FT, PDT, FV, XV XY, PG, TI, etc.)

process tubing, cable pulling, connection and termination.

• Perform IR and Continuity Test of Instrument and Power Cables, and review

OTDR Test for Fiber Optic Cables.

• Inspection of installation & testing of electrical lighting fixtures, flood lighting fixtures.

• Installation Inspection of Fire and Gas Detectors, Fire Alarm System, smoke

detectors, heat sensors.

• Inspection of Weather Monitoring Stations and instruments.

• Update and monitor QC Database of inspected and remaining items for MC.

• Routine surveillance inspection of field Electrical & Instrumentation installation.

Position: INSTRUMENT QA/QC INSPECTOR

Company: Sejong Corporation

Duration: March 2010- December 2011

Project: QAFCO-5&6 Expansion and Integration

E.P.C: Saipem& Hyundai Engineering Construction Location: Messaid Industrial City, State of Qatar

Job Description:

• Perform and Record all Inspections, examinations and tests as per QCP/ITP.

• Perform all necessary works for the preparation to enable inspections, examinations, and tests.

• Witness calibration and installation of instrument like shut down valves,

Pressure safety valves, flow transmitters, pressure transmitters, temperature transmitters, local indicators, gauges, orifice plates.

• Ensure the work is carried out in accordance with the latest approved issued for construction drawings, specifications and As Built Drawings.

• Inspection of installation routes and cable support systems cable trays, conduit, and junction box.

• Inspection of Marshalling Cabinets (DCS, ESD, FAS, Telecom, Consoles, Engineering Workstations.

• Inspection of Instruments installation & its cabling, termination of transmitters, control valves, pressure Transmitters, solenoid valves etc.

• Punch List clearing and close out.

Position: ELECTRICAL QA/QC INSPECTOR

Company: Al HassounSejong Electromechanical Corp.

Duration: December 2008- December 2009

Project: Shuaiba North Co-Generation (Power and Distillation) Plant

E.P.C Mitsui & Co.& Hyundai Engineering Construction

Location: Shuaiba, Kuwait City, Kuwait

Job Description:

• Monitor the work in progress in accordance with the approved work procedures/method statements and applicable standards are being implemented and followed.

• Ensures that the materials being used/installed in the construction site is conforming to relevant drawings and/or standard specifications.

• Perform field electrical inspection, examination and testing as per QCP/ITP.

• Inspection of Electrical equipmentInstallation,415V SWGR, 3.3 KV, 6.6KV,11K 110V UPS and GIS(SF6) including Testing like HI-POT.

• Inspection of installation & testing of electrical lighting fixtures, Navigation light (Aircraft warning System), flood lighting fixtures.

• Installation Inspection of Fire Alarm System, MACP. LACP, smoke detectors, heat sensors, solenoid valves, manual call point.

• Inspection of installation of Cathodic protection anode and cathode electrodes and its cabling and testing installed for vessels U/G & A/G pipe lines.

• Witnessing of Electrical test for Cables (Insulation Resistance Test, Hi-pot test, motor installation and Solo Run, lighting lux checks, Soc. Outlets, welding receptacles.

• Inspection of Telecom and Public Address System, CCTV.

• Inspection of Main Earthing System, Protective Earthing, Earth Test Pit Lightning Protection.

• Punch List clearing and Close out as per schedule.

PROFESSIONAL QUALIFICATION

Bachelor of Science in Electronics and Communications Engineering

Aklan State University

June 2002- October 2005

Diploma in Computer and Electronics Technology

STI College- Balagtas

June 2000- April 2002

TRAININGS /SEMINARS

TBOSIET and H2S Training (OPITO Approved)

August 2020

UPS and Solar System, Smart Motor Control Center Using SIEMENS SIMOCODE PRO V

Institute of Integrated Electrical Engineers of the Philippines- Saudi Arabia Chapter

November 2014

IFAAST- Aspirating Detection System and Overview of NOVEC 1230

Institute of Integrated Electrical Engineers of the Philippines- Saudi Arabia Chapter

June 2014

Foundation Fieldbus and Wireless Hart: Principle & Application in Control System

Institute of Integrated Electrical Engineers of the Philippines- Qatar Chapter

July 2010

Conceptual Approach of Protective Relaying to Power System

Institute of Integrated Electrical Engineers of the Philippines- Qatar Chapter July 2010

Pneumatic Industrial Controls Meralco Foundation, Incorporated January 2009

Industrial Electrician

Meralco Foundation, Incorporated

November 2008

Electronics Technician

Phil-Asia Technical Consultant and General Services

September 2007

SKILLS AND STRENGTHS

• High level of computer literacy with experience using Microsoft packages including

Microsoft Word, MS Excel, PowerPoint and Outlook

• Excellent in English written and oral communication skills.

• Good exposure to SAUDI ARAMCO, ADNOC, QP, Shell and International standards.

• Disciplinary exposure and experience in all aspects of Project Execution.

• Ability to work effectively in Multicultural Teams as a member.

• Ability to work under pressure and meet deadlines by Systematic approach to problem solving.

UAE Driver’s License.

PERSONAL DATA

Age: 38

Date of Birth: 29 April 1984

Nationality: Filipino

Marital Status: Married

Religion: Christian-Catholic

REFERENCE:

Hi Soo Jang Instrument Manager/ Shah Gas Project Samsung Engineering Co Ltd. Tel.No.: +971-**-***-****

Email: adzvy0@r.postjobfree.com

Mac C. Calizo, Jr. Office Engineer / Project Coordinator/ Admin Chief

HOT-Sejong KOC-Crude Export Facilities Project

Tel.No.: +965-*******

Email: adzvy0@r.postjobfree.com

Arnel M. Delara Instrument Engineer

Hyundai Engineering and Construction Co, Ltd

Qafco 5 & 6

JOSEPH JR REGALARIO

Contact this candidate