Start Up Control Room
Resume:
Family Name: BOUALLEGUI
First Name: CHOUAIB
Date of Birth: November 25th 1983
Marital Status: Married
Nationality: Tunisian
Address: Avenue 2 Mars 1983 Sidi BouAli -Sousse 4040 -Tunisia
E-Mail: *******.**********@***.***
*************@*****.***
Mobile: 002**-********
Career Objective:
All the time I wanted to become a good Oil & Gas specialist and I hope succeeded. I will answere to the new challenges. I want to work in a strong company, to assert myself, so that the peoples can be appreciate my activitie. In this way, I hope to be with the company for a few years to prove all my abilities.
Overall background:
More than 16 years of extensive experience in commissioning & operating oilfield and gas plant process equipment and following all site operating, quality and safety procedures. Working as tubular running service operator, well testing operator, well testing lead operator, production operator, control room operator and chief operator. Ability to clearly and frequently communicate with various functions within the site, maintenance, and quality operations.
Ability to read P&ID’s, PFD’s, C&E and ISO drawings and elaborate procedures, according with process activities.
Education:
2021: Master degree (industrial IT and automation) Sfax- Tunisia
2006: University Diploma (industrial IT and automation) Sfax- Tunisia
2002: High School Diploma (Mathematic) Tunisia - Sousse
Professional Training & Certificates:
2015 Training of Safe system of work & CARE reporting (OMV)
2016-2017 Sessions of trainings in HSSE, Maintenance & Operation. (IHRDC)
2021Certificate Appreciation proactivity & commitment to HSSE (OMV)
2019 Certificate Authorized Gas testing (Prevents)
2019 Certificate Handling hazards substance (Prevents)
2019 Certificate Handling hazards substance (Prevents)
2021 BOER Basic Onshore Emergency Response (ITC)
2021 Fire Team Member (ITC)
2022 Defensive driving and Four-wheel drive training (CNF)
2022 Automated external defibrillator training (MEDIC MULTISERVICES)
2021 ATEX training, ATEX authorization (Apave)
2021 Certificate Authorized Gas testing (Prevents)
2021 Advanced first aider at work (GMF)
2021 Electrical certification standard NF C1B-510, electrical operations in low and high voltage
(Apave)
2022 Process Safety: - Crane Safety Awareness (eLearning).
- Management of Change (eLearning).
- Toolbox Talk (eLearning).
- Introduction to Risk Assessment (eLearning).
- introduction to Hydrogen Sulphide (eLearning).
- Hazardous Areas Classification (eLearning).
- Shift Handover (eLearning).
-Fire and Explosion Awareness (eLearning).
Languages:
Arabic : Fluent native speaker
English : Excellent command / proficient in spoken and written
French : Near native / fluent
Softwares and Programs :
PVsyst, SAP Step 7 Tia portal, AUTOCAD, MICROSOFT OFFICE, MATLAB
Professional experiences:
From Mai 2021 till now:
OMV (Tunesien) Production GmbH
Chief Operator Production
* Monitor, operate, and control the CPF process facilities and utilities inside control room and outside including well sites and flow lines according to the standard procedures and regulations.
* Supervise the plant operations from DCS.
* Assign tasks to the operators to ensure efficient and safe operations
* Report to production supervisor any abnormal process conditions and contribute optimization of plant performances.
* Deputize production supervisor as and when required.
* Inspect and monitor assigned work area and plant equipment for abnormal conditions.
* Monitor and record all production parameters and perform proper troubleshooting to ensure plant is running within its operating envelope.
* Act as area and/or issuing authority as per PTW procedure.
* Issue notification in CMMS and initiate maintenance activities workflow as and when required.
* Carry out jointly with maintenance technicians regular safety critical elements (SCE) inspection as per the written scheme of examination (WSE) and ensure performance standards are met...
* Assist maintenance staff to access process equipment by performing proper isolation and ensure PTW is in place and opened prior start any work.
* Initiate to prepare risk assessment for all work scheduled in the process area under her/his authority.
Initiate/participate to RCFA for any malfunction, upset on the plant/package, and contribute to remediate situation/avoid recurrence through the completion of assigned corrective actions.
* Follow up and optimize the chemical injection rates in the process facilities.
* Provide input to the daily production and activities reports.
* Comply with all relevant safety, health and environmental procedures to ensure a healthy and safe work environment.
November 2018– April 2021:
OMV (Tunesien) Production GmbH
Control Room operator
* Responsible for safe and efficient operation of process plant facilities and utilities systems to meet production targets.
* Shutdown or start-up units (planned/ unplanned) equipment during shift and gives appropriate order to field operators.
* Analyses and resolves work problems or assists Operator in solving work problems.
* Handling of operational emergencies, unit shutdowns and start-up activities.
* Conducts initial panel checks to verify and understand current operating conditions and activities to ensure safe, reliable and in fine mode. Monitor, maintain and optimize process parameters (Level, flow, temperature, pressure etc) within operating requirements.
* Monitor and record the status of all ESD, Fire, and Gas Process Control Safety Defeat Overrides, ensuring compliance with guidelines and removal at the earliest opportunity.
* Reports DCS and instrument faults.
* Executes process optimization instructions from shift team leader and shift superintendent.
* Assist in managing department workforce, reinforce company policy and procedure and establish and maintain healthy working relationship across the organization
* Defines and sets necessary operating condition changes to optimize the plants operation.
* Shutdown or start-up units (planned/ unplanned) equipment during shift and gives appropriate order to field operators.
* Coordinates testing of major instrumentation equipment, such as DCS, Fire and Gas Alarm System, etc.
* Familiar with P&IDs, PFDs and schematic drawings.
* Learn and operate the Disturbed Control System (PLC Allen Bradley ABB, Siemens etc.)
for the plant.
* Monitor and control all process parameter conditions such as flow rates, pressures, Temperatures, levels, through displays, graphics, and trends, FCV, LCV, TCV, FFC.
* Control and monitor Export Pipelines, LVS Stations Wellheads remote via RTU.
August 2014– October 2018:
OMV (Tunesien) Production GmbH
Process Operator
* Start and stop equipment’s outside such us Propane compressors, hot oil pumps, N2 membrane etc., and start stop system and sub-system, TEG, Sweetening etc.
* Responsible for plant operational registers like override log, PTW, handover log, process alarm& trip set point register, pressure safety valve (PSV, PRV, and VPRV) LO/LC and Lockout- tag out station
* Following the right application of SSOW the Permit to Work procedures (JSA, Defeat certificate, LO/TO.)
* Mastering the cause and effects matrix (SECs) in the plant and acting according to its diagram.
* Maintain process reliability and optimize production value (optimized done such us gas reciprocating gas lift compressors, gas export compressor, efficiently of separation etc.)
* Report to lead operator in case of parameter abnormalities and process deviations immediately.
* Gas compressors, test separators, second stage separators, third stage separators, skimmer, control room...responsible for offloading station (trucking, unloading crude oil, drainage, shipping ), applying HSE rules and procedures of the company .
* Monitor general operations of separators, crude heaters, desalters, gas liquids knock-out vessels, chemical injection systems, crude oil shipping pumps and metering systems.
* Monitor vessel fluid levels, report anomalies, and adjust controls as directed.
* Monitor the operation, start/stop, load/unload functions, and determine pump performance in various applications.
* Commissioning and startup of new equipment.
* Process fault finding and implementation of corrective action.
* Preparing equipment for maintenance and follow the Permit to Work process to ensure the safe execution of work.
* Ensuring all work is carried out in accordance with all Company and governmental safety, environmental and health rules and regulations.
* start-up, shutdown and troubleshooting of Gas valorization compressor
* Monitoring and checking dehydration unit, TEG regeneration unit
* working as well site operator, taking parameters, checking for issues, replacing nitrogen bottles for hydraulic panels, ensure that all works outside the facility are within the safe standards and report to supervisor .
* working on jet pump (hydraulic lift) start up, shutdown and troubleshooting
* working on ESP pumps startup, shutdown and troubleshooting
* working as a DCS operator, monitoring all process parameters, adjust parameters to meet the required production level and improve process reliability, rise alarm if needed, maintain communication for all anomalies between the team.
gas compressors, test separators, second stage separators, third stage separators, skimmer, control room...responsible for offloading station(trucking, unloading crude oil, drainage, shipping ), applying HSE rules and procedures of the company . Monitor general operations of separators, crude heaters, desalters, gas liquids knock-out vessels, chemical injection systems, crude oil shipping pumps and metering systems.
* Monitor vessel fluid levels, report anomalies, and adjust controls as directed.
* Monitor the operation, start/stop, load/unload functions, and determine pump performance in various applications.
* Commissioning and startup of new equipment.
* Process fault finding and implementation of corrective action.
* Preparing equipment for maintenance and follow the Permit to Work process to ensure the safe execution of work.
* Ensuring all work is carried out in accordance with all Company and governmental safety, environmental and health rules and regulations.
* start-up, shutdown and troubleshooting of Gas valorization compressor and Gas lift compressors
* Monitoring and checking dehydration unit, TEG regeneration unit
* Working site operator as well, taking parameters, checking for issues, replacing nitrogen bottles for hydraulic panels, ensure that all works outside the facility are within the safe standards and report to supervisor.
* Working on jet pump (hydraulic lift) start up, shutdown and troubleshooting
* Working on ESP pumps startup, shutdown and troubleshooting
* Working as a DCS operator, monitoring all process parameters, adjust parameters to meet the required production level and improve process reliability, rise alarm if needed, maintain communication for all anomalies between the team.
* Provide guidance & help to the DCS operator in case of emergency and normal CPF operation.
* Checking Changing the Orifice of Gas Lines Stock Checking Operation of PCV, LCV, FCV
* Sampling of Oil Water, Gas & Chemicals, reading & orifice changing,
* Differential pressure reading. HP, MP & LP Separators handling, degassing vessels, well fluid oil, gas and water Level, Pressure
* Pre-heater, heat exchanger, stabilization Coolum water drown off etc.
* Storage & Export: export Pumps, Fiscal Metering package, RVP& Salt analyzer
* Receiving Crude from different Gathering EPFs, produced water Tank, Heater-Treater, Injection and Rate Calculations.
November 2008– August 2014:
ITALFLUID MAGHREB:
Well Test Lead Operator
*Responsible for checking SWT equipment at workshop.
* Responsible for leading the crew for preparing upcoming jobs.
* Ensure proper preparation of WT lab accessories.
* Ensure loading and unloading of correct equipment being shipped and arriving on site safely.
* Responsible for holding daily safety meeting with the crew on site.
* Responsible for a specific 12 hour shift supervising on site.
* Ensure that the operations are delivered safely, professionally, and without environmental harm.
* Responsible for ensuring that all the client’s policies and procedures are accurately followed.
* Ensuring that all contractors adhere to the client’s expectations.
* Responsible for training and evaluation of Well Test staff on site.
* Responsible for checking the gathered data and reporting to Client on site.
* Supervise many jobs at both rig and rig less operations (Gas and Oil Wells – High flow rates, High pressure and temperature).
* Carry out early production facilities (Oil & Gas plants) including design, executing and running.
* Initiation and revision of (Oil, Water and Gas) flow rates Calculation manually and by using computer programs.
* Repair and maintain all Well Test equipment.
* Attend many minor and major Fracturing Jobs in clean up and flow periods.
* Attend many jobs on Onshore and Offshore rigs and Production Platforms Including Drill Stem Tests as well as Production Tests for Oil, Gas and Gas Condensate wells.
* Operating on various Well Test equipment such as Test Tree, Choke Manifold, Test Separator, Heat Exchangers, Surge Tanks, Transfer electric -and diesel Pumps, Test Burners, Sand Filters and Desanders.
* Performed PVT sampling as per standard (ASTM) from Test Separator
* Familiar with the precautions required for special jobs such as Acid
Squeeze, MEG re-concentration and high pressure and temperature jobs.
November 2006 to October 2008:
NA SOLID Petro-serve LTD
Well Test Operator
* Conduct site and road survey for mobilization of Surface Well Testing (SWT) equipments to another location.
* Loading and unloading of SWT equipments on trailers at site.
* Rig up and Rig down of SWT equipments.
* Keeping the equipments in proper location by considering hazardous zones.
* Hammering of HU pipes to connect flow line in upstream and downstream.
* Connecting flow line from X-mas tree to waste pit.
* Connecting flow line from X-mas tree to surge tank, separator, storage tanks through data headers, test choke manifolds, sand trap, 3 way and 5-way diverter manifolds and tube to flare pit by using L bends, T bends, cross over and pipes of 1502, 602, 206 of different lengths.
* Cable laying and termination of sensors and electrical equipments from diesel generator to light poles, containers, motors, compressors etc.
* Installation, operation and maintenance of pressure sensors, temperature sensors, differential pressure sensors, water flow rate, oil flow rate, sand detector and explosive level sensor.
* Flow calculation going to waste pit, surge tank, separator and flare pit.
Usage of Barton chart recorder, operation of pressure switch, ESDV, ESDV panel using pneumatic control operation by maintaining air pressure delivered by air compressor and knowledge of CTU operations.
* Connecting analog meters and sampling point to thermol to obtain pressure sample in flowline at upstream and downstream data header.
* Undergo maintenance activity by greasing SSV, choke manifold, flange and wing end 1502, 602, 206 pipes, *L bends T bends, cross over, 3 way and 5-way diverter manifolds.
* Obtaining salinity, PH, BS&W and flow rate of water.
* To chair pre-job/toolbox meetings held prior at any Well Test operation commencing location.
* To complete all equipment maintenance reports, job history cards and equipment status etc. to file and record as per company procedures and standards.
* To submit detailed reports on any operational anomalies to the Well Test Supervisor.
* Concept of following operation (at Rig site) and techniques, it`s also part of my study.
* Reported any hazardous defects in the plant, equipment, and workplace, or shortcomings in the * existing controls to a responsible person without delay.
* Assisted Senior Operator in Senior Operators responsibilities and perform job duties as per instructed.
* Changed orifice plates in both junior and senior Daniels meters as well as reconfigured Totalflow software to reflect the changes
* Tested and Coordinated installation of unit/system, including rig up and rig down of all test equipment, and indicating instruments.
Contact this candidate