Jerryko C. Saldom

adzlil@r.postjobfree.com

Blk * Lot 17, PH 3B, Purok Imelda, Brgy, Dela Paz, Antipolo City, Philippines

Mobile No: +639********* ph. No: +639********* Philippines

Senior Electro-Mechanical Technician

Qualification Summary

Over 13 years experience in Gulf countries and Philippines in the fields of Electro-Mechanical such as Reverse Osmosis installation, maintenance and cleaning, pipeline cleaning, disinfection and passivation. Installation and troubleshooting of equipments (MCC, LVS, LCP, LCS, VFD & PLC) and Process control instruments (Flow, Level, Pressure, and Temperature Transmitter).

Professional Experience

Position: electro-mechanical

Duration: May 2019 – 2022 Present

Company: Freelancer/Home Service

Company Industry: None

Location: Manila, Antipolo

Country: Philippines

Department: Servicing

Job Description: All automatic appliances and electrical insulation/modification.

1) Clean machines and machine parts, using cleaning solvents, cloths, air guns, hoses, vacuums, or other equipment.

2) Dismantle machines and remove parts for repair, using hand tools, chain falls, jacks, cranes or hoists.

3) Inspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needs.

4) Install, replace, or change machine parts and attachments, according to production specifications.

5) Lubricate or apply adhesives or other materials to machines, machine parts, or other equipment, according to specified procedures.

6) Reassemble machines after the completion of repair or maintenance work.

Position:

electro-mechanical

Duration:

Apr 2016 – Apr-2018

Company:

WAFRAH FOR INDUSTRY AND DEVELOPMENT

Company Industry:

Manufacturing / Production

Location

PRINCE TURKI BIN FAISAL STREET 131 BURJ AL DABAB 2, OFFICE 7 RIYADH SAUDI ARABIA

Country

Kingdom of Saudi Arabia

Department:

maintenance

Job Description:

1) Clean machines and machine parts, using cleaning solvents, cloths, air guns, hoses, vacuums, or other equipment.

2) Dismantle machines and remove parts for repair, using hand tools, chain falls, jacks, cranes or hoists.

3) Inspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needs.

4) Install, replace, or change machine parts and attachments, according to production specifications.

5) Lubricate or apply adhesives or other materials to machines, machine parts, or other equipment, according to specified procedures.

6) Reassemble machines after the completion of repair or maintenance work.

Position:

Electro-Mechanical

Duration:

Oct 2014 - Sep 2015 (0.9 yrs)

Company:

Arabian Packaging Company ( SAHARI PACK )

Company Industry:

Manufacturing / Production

Location

Arabian Packaging Company (Sahari Pack) Building Jeddah Industrial Area Phase 5 1406 Saudi Arabia

Country

Kingdom of Saudi Arabia

Department:

Maintenance

Job Description:

1.The care and servicing by personnel for the purpose of maintaining equipment and facilities in satisfactory operating condition by providing for systematic inspection, Detection

, and correction of incipient failures either before they occur or before they develop into major defects.

2.Maintenance, including tests, measurements, adjustments, and parts replacement, performed specifically to prevent faults from occurring.

The primary goal of maintenance is to avoid or mitigate the consequences of failure of equipment. This may be by preventing the failure before it actually occurs which Planned Maintenance and Condition Based Maintenance help to achieve. It is designed to preserve and restore equipment reliability by replacing worn components before they actually fail. Preventive maintenance activities include partial or complete overhauls at specified periods, oil changes, lubrication and so on. In addition, workers can record equipment deterioration so they know to replace or repair worn parts before they cause system failure. The ideal preventive maintenance program would prevent all equipment failure before it occurs.

Veolia Water Solution and Technologies - saudi arabia

Position: Senior Electro-Mechanical Tecnician

June 2013-2014

Site/project handled:

1.Saudi iron and steel company (hadeed) – jubail

2.jubail gas plant co. ltd. (gas) – jubail

3.jubail chemical industries company (jana) – jubail

4.CHEMANOL (Methanol Chemical Company) –JUBAIL

5.K.F.U.P.M. – DAMMAM

6.NASCO STEEL COMPANY – DAMMAM 2nd INDUSTRIAL

7.SAUDI ARAMCO – QATIF

8.SAUDI ARAMCO – RASTANURA

9.SAUDI ARAMCO – DHARAN, DAMMAM

Job Description:

1.Installation, cleaning and trouble shooting of Reverse Osmosis Modules

2.Assist Application Engineers in chemical cleaning, passivation and dosing various specialty chemicals such as Biocides, Corrosion and scale inhibitors, Oxygen scavengers etc.

3.Repair of dosing pumps and dosing lines.

4.Installation of corrosion monitoring system.

5.Modification of Reverse Osmosis set-up.

6.Installation of Process control Instrument such as Flow transmitter, Level Transmitter etc.

7.Trouble shooting of High Pressure Pump ( Grundfos brand )

Metito (Overseas) Qatar W.L.L., Doha Qatar

2008 – 2012

Site/project:

New Doha International Airport – Waste Water Treatment Plant Project

New Doha International Airport – WWTP NOC 36 Variation Order

Pearl Qatar – Sea Water Reverse Osmosis Plant

Qatar aluminum – Waste Water treatment Plant

Position: Senior Electrical Technician

Job Description:

1Installation and fabrication of cable ladder, cable tray and supports for power, control and instrument cable based on the approved & standard layout drawings.

2Installation of 415V LV switchgear, MCC, VFD, UPS and PLC panel.

3Installation of wall mounted type, surface mounted type & flush mounted type local control panel (LCP) and local control switch (LCS).

4Installation of instrument and support based on the hook up drawings and loop diagrams.

5Cable pulling of power & control cable and instrument cable based on the power cable schedule, control & instrument cable schedule.

6Termination of power, control & instrument cable as per approved cable termination diagram.

7Insulation Test & loop checking.

8Torquing and cable tagging.

9Preparation of man hour schedule according to priority work daily basis as per site condition.

Mindanao - Medina Misamis Oriental

Fiesta brand Inc. April. 11, 2006 – May 16, 2007

Position: Electrical Technician

Job Description:

1Installation of conduit pipes and support at the proper location, lighting fixtures and auxiliaries.

2. Installation of power, lighting and auxiliaries panel. (Wall mounted, surface mounted and flush mounted type)

3.Cable pulling and termination according to each cable schedule and cable termination diagram.

4.Insulation Test, loop checking & tagging.

5.Take off electrical materials, tools, conduits, cable ladder, based from standard layout drawings.

6.Installation of cable ladder, conduits and supports for power, auxiliaries & lighting.

7.Installation of lighting panel and power panel. (Wall mounted, surface mounted and flush mounted type)

8.Wiring and installation of auxiliaries like fire alarm, telephone and paging system.

9.Termination of power cable and auxiliaries cable as per approved cable termination diagram

Personal Background

Date of Birth : Nov. 28, 1985

Place of Birth : P-9 Cabug medina, misamis oriental

Nationality : Filipino

Civil Status : Single

Religion : Roman Catholic

Age : 32

Educational Background

COBSAT : 2004 - 2005

CAGAYAN DE ORO ( BUGO ) SCHOOL OF ARTS & TRADES

ELECTRICAL TECHNOLOGY 2

Vocational Course

SECONDARY : 2002 – 2003

MEDINA NATIONAL COMPREHANSIVE HIGH SCHOOL

MEDINA, MISAMIS ORIENTAL

ELEMENTARY : 1997 – 1998

GOVERNOR PELEAZ ELEMENTARY SCHOOL

CABUG, MEDINA, MISAMIS ORIENTAL

Technical courses

Technical Education and Skills Development Authority (TESDA)

Misamis Oriental Provincial Office

2nd Floor,Don Gregorio Pelaez Sport Memorial Center

February 25, 2006

NCI

Manila Electric Cooperative (MERALCO) Foundation Incorporated (MFI)

Isabel bldg.,2240 taft ave.,Pasay City PhilippineS

ELECTRO PNEUMATICS

NOV.05, 2012 TO NOV. 15 2012

Manila Electric Cooperative (MERALCO) Foundation Incorporated (MFI)

Isabel bldg.,2240 taft ave.,Pasay City PhilippineS

programmable logic controls

nov. 16, 2012 to nov. 23, 2012

Al-jazeera international school, formerly philippine school in dammam ( psd ),dammam, kingdom of saudi arabia.

autocad 2010 – 2d basic

january 31,2014 until march 28,2014

MFI POLYTECHNIC INSTITUTE INC.

(MERALCO FOUNDATION INC)

INDUSTRIAL ELECTRICIAN

JULY 11, 2018 - JULY 23, 2018

MFI POLYTECHNIC INSTITUTE INC.

(MERALCO FOUNDATION INC)

ADVANCED INDUSTRIAL MOTOR CONTROL

JULY 30, 2018 - AUGUST 9, 2018

MFI POLYTECHNIC INSTITUTE INC.

(MERALCO FOUNDATION INC)

ELECTRICAL CONTROL IN ADVANCE SYSTEM

JULY 11, 2018 - AUGUST 9, 2018

Professional Membership

technical Education and Skills Development Authority (TESDA)

Electrical National Certificate License

License No. 061*********

nc1

Manila Electric Cooperative (MERALCO) Foundation Incorporated (MFI)

programmable logic and control

Manila Electric Cooperative (MERALCO) Foundation Incorporated (MFI)

ELECTRO PNEUMATICS

References:

As’ad Jbour

WTC Manager-Eastern Province

VWS, Saudi-Chemical Ind.

P.O. Box 3896, Dammam 31481

Tel.: +966-*-***-****

Fax: +966-*-***-****

Mob.: +966-**-***-****

adzlil@r.postjobfree.com

Asem Zino

Senior xecutive Water Treatment Engineer

VWS, Saudi-Chemical Ind.

P.O. Box 1685, Dammam 31441

Tel.: +966-*-***-****

Fax: +966-*-***-****

Mob.: +966-**-***-****

adzlil@r.postjobfree.com

Aurelo Gonzalo

Production Manager

WAFRAH

I hereby certify that the above information is true and correct to the best of my knowledge and belief.

Jerryko C. SaldoM

Applicant

Contact this candidate