Quality Control Power Plant
Resume:
ZZZ*zzazqzz*sqz****Eqzesfe**x*Wf
A professional with more than 19 years in the field of instrumentation and control. I have been involved in local andsz2s international construction projects of coal power plant, refinery, mining and other indusrties. I have experience working with Korean, Japanese, Taiwanese and Arabian EPCs.
J4d
Electrical & Instrument QA/QC Commissioning
Newcrest Mining Limited
P.O Box 789 Port.Moresby. NCD
Lihir Island, New Ireland Province
Papua New Guinea
July 21, 2017 to the presence
Loop Check Instrument Supervisor / Guam Advance Systems, Inc.
2 X 150MW Coal Fired Power Plant
Thermal Visayas Energy-efficient Project
Sitio Looc 2 Barangay Bato, Toledo City
January 15, 2017 to April 15, 2017
QA/QC Inspector / TRUE NORTH
SMC LIMAY 4 X 150MW X 460 T/H RH-CFB Power Power
Carbon Lamao, Limay, Bataan
March 14, 2016 to January 07,202nd zzezzesponsible for supervising construction activities and trade and field personnel related to the discipline.
3źe2w1zMonitor daily construction details and daily progress in his area
Maintain the highest quality standards while administering good construction safety practices with all on-site activities.
Promotes job site safety, encourage safe work practices and rectify job site hazards immediately. Regularly participate in HSE meetings, toolbox talks and daily jobsite walks and keep a meticulous record of these.
Prepare reports and forecasts relatin5ze1zg relatin5ze1zg sto construction progress, job manpower forecasts etc.
Sorry 2ccthe activities of subcontractors to ensure compliance with specifications and procedures and with the project objectives for safety, quality, productivity, schedule and cost. Provide solutions to subcontractor’s problems in order to achieve the successful execution of the project.
Responsible for the implementation of construction work processes, project procedures and instructions within assigned operations.
Ensure that the material handed over to the Subcontractor is controlled, preserved and issued for the intended purpose.
Serves as a coach and mentor for less experienced staff
Instrument Supervisor / DAELIM PHILIPPINES
SM200 Coal Fired Power Plant, Phase 1 Project.Sarangani Energy Corporation, Maasim Sarangani Province
March 11, 2015 to January 31,2016
Supervise all installation of panels,junctions box,instruments,and other I&C devises.
Perform site acceptanc1e test (SAT) with the presence of the client, Yokogawa and Invensys triconex vendor.
Supervise termination of multi cable primary and secondary, final meggering / continuity test of multi cable for client acceptance
Perform Pre – Loop and final loop test of the transmitters,motor operated valve (MOV), Control valves, switches and on/off valves as per the I/O lest.
Board man in DCS during pre- loop and final loop test.
Troubleshooting and field calibration, configuration of transmitter, control valve,motor operated valve during pre – loop.
Involve in functional test,pre –commissioning,and start up.
Knowledgeable with hart communicator and other instrument test equipment.
Instrument Supervisor / DAELIM PHILIPPINES
RMP-2 Refinery Project, Petron Bataan, Alangan Limay, Bataan
July 5, 2013 to january 31,2015
Supervise to the contractor in installation,termination,function testing, calibration, loop checking and troubleshooting of control equipment and field instruments
Supervision of work and making daily diaries to support claims as per work pack/work order.
Planning and scheduling of material take-off,manpower/hour and equipments for efficient implementation of instrumentation works.
Responsible for reviewing and visual inspection of installation for quality control.
Coordinates construction activities to each related department involved on problem with installation those that are subject to field condition.
Planning and making decisions for field change due to discrepancy between other trade department to arrange and discuss to the higher parties.
Plans and organizes work activities through proper documentation control related in construction such as,loop-checking,3 acceptance test,punch list making of test package.
Implementation of proper procedures in installation,material specification and standard tools familiarization.
Responsible for developing a large team work to accomplish operation objectives.
Plan work flows,manage multi priorities and meet daily production targets while consistently reducing downtime.
Establish and maintain acceptable quality levels for all assigned products.
Implements disciplinary actions to employee for violation of project rules and regulations.
ensure all work is performed in accordance with applicable Environmental, Health, Safety, codes as required by state/local & company regulations
Instrument Supervisor / AL HUGAYET EST
KAUST Commissioning Project, THUWAL, Jeddah KSA
March 31, 2009 up to December 31, 2012
Ensures the consistency of field inspection and testing of instrumentation equipment according to the standard.
Worked as a KAUST Proponent Testing &Pre- commissioning methods according to site test plan, functional test and international standard work procedures.
Managed supervision of the contractors with close coordination with ARAMCO PMT and PID is regarding the overall day to day execution of the KAUST instrumentation project.
To provide the proponent with all the records of pre- commissioning tests related to instrumentation assuring that it passes the qualifications required.
Active member of the approving staff for all the pre-commissioning and commissioning checklist & test results involving instrumentation.
Actively involved in Pre commissioning and commissioning of instruments and equipment in BAS (Building Management System), DCS (Distributed Control System) as an application of PLC (Programmable Logic Control)
Instrument Foreman / ATS Construction International, Inc.
PASAR- Installation of Rectifier 1, Isabel, Leyte
September 01, 2008 up to December 12, 2008
Preparation of daily work activities and required materials on site.
Conduct daily toolbox meeting and precaution for the safety of work.
Conduct inspection on the workable area at the site before the work undergo.
Distribute people in their respective work area.
Supervise the work to insure that all electrical & instrument works are followed as per P&ID and location plan drawing and client established procedure.
Coordinate to supervisor and other personnel on the job site.
Conduct inspection for the safe condition of work, and insure the proper personal protective equipment (PPA) is applied.
Inspection and checkout of instrument materials, in compliance with the standard design, and specification for installation in the field.
Prepares of daily and weekly accomplishment reports based on actual versus target.
Instrument Foreman / ATS Construction International, Inc.
Petron MSF Utilities Project, Petron Bataan Refinery, Alangan Limay., Bataan
September 11, 2007 to May 20, 2008
Provide leadership in establishing systems, process to enhance the current level of effectiveness and efficiency.
Conduct advance inspection and coordinate electro-mechanical system on the workable area to insure all electrical & instrument installations in the field are based on standard procedure and clear routing for any obstruction, hold point’s and follow us per drawing approve by the client.
Request and arranged approve materials and assigned manpower to their respective working area.
Installation, calibration, inspection and troubleshooting of electrical and electronic instrumentation components (transmitter, switches, valves, sensors, etc.) and system to have the correct output reading.
Perform and gather some data, such as continuity test, insulation test, and loop checking.
Conduct routine check to ensure assigned manpower are working safely, free from hazards and use the right tools, right materials for the right job.
Scheduling of daily work activities and preparation of daily and weekly accomplishment report based on actual versus target.
Instrument Foreman / T. I. D. J
South Pars PH.6.7&8, Assaluyeh, Bushier Iran
October 25, 2005 – July 5, 2006
Assigned in Local Equipment Room (LER) for installation of all panels, such as ( ESD,DCS, Marshalling, F&G, FOC ), and perform the system cable, signal cable, power cable, and all panels, responsible and cable pulling, termination and installation of different kinds of instruments, pneumatic and electronics instruments, can read and interpret P & ID and other relevant drawings and diagrams, capable of handling people, support to supervisor, monitor work progress and material requirement, attend the progress review and technical meetings.
Instrument Technician / Iscosa
Riyadh 11392 K.S.A.
February 22, 2004 – June 26, 2005
Assigned in installation, termination, punch list preparation, loop checking, pre-commissioning, commissioning, start-up, and also have experience in fault-finding, troubleshooting, calibration, vibration monitoring, repair and maintenance (PLC, Sensors, Controls, Level, Flow, etc.) Ability to read and interpret drawings, block diagrams, knowledge in plant instrumentation and control, maintains housekeeping at work site and ensures tools and equipment are in good working condition. Adheres to all safety rules and regulations
Instrument Technician / Al Hammam Co.
P.O. Box 280256, Riyadh, 11392, K. S. A.
April 04, 2003 - February 21, 2004
Assigned in installation of instruments, like for example pressure transmitter, level transmitter, flow transmitter, differential pressure transmitter, temperature transmitter, thermo-couple, environmental analyzer and others, large experience in oil and gas projects, also and shutdown projects, perform pneumatic and hydraulic pressure and leak checks, knowledgeable in calibration in most instruments in oil and gas, termination, continuity test, and insulation resistance test, loop checking and pre-commissioning.
Electrical & Instrument Technician Maintenance / Petron Bataan Refinery Alangan, Limay, Bataan
June 04, 1997 - March 31, 2003
Responsible for troubleshooting electrical and instrumentation problems, predictive & preventive maintenance.
Directly report to maintenance coordinator.
Troubleshoots & repair problems with production equipment.
Locate electrical trouble by using multi- meter & Megger.
Knows the basic troubleshooting and repairs of electrical/ electronic control circuit for AC/Ad motor circuits. This includes the ability to reprogram and drive optimization.
Diagnose, analyze and repair electronic, electromechanical and instrumentation equipment, operating in all areas, utilizing meters, gauges and other testing methods.
Install, repair, adjust and calibrates various types of measuring, recording and controlling equipment necessary to monitor or run manufacturing lines.
Knowledge of PLC logic and related controls.
Assists in calling vendors for assistance with equipment.
Review work orders with resources as they are received, ask for clarification and confer with a request or for additional clarification when needed.
Performs work in the servicing of pumps, boilers, piping and related equipment.
Installation of electrical & instrument conduit in clouding of fabrication of support.
Installation of control panel.
Checking of power lines including motor with the use of Insulation Tester (Megger), Multi-tester, Clamp Ammeter
Installation of fire, water deluge system.
Calibration and instillation of instrument such as Control Valve, Transmitter, Thermocouples, Fire Alarm, Smoke Detector, Limit Switches.
Analyze / interpret inspection and calibration results, prepare report obtained during preventive maintenance routing inspection.
Calibration of malfunctioning transmitter
Calibration of control valve
Pull out of a defective control valve
Inspection and cleaning of flame detector in furnace
Pull out of defective transformer
Instillation of instrument tubing in control valve & transmitter
Recondition of contract of relay pressure gauge
Testing and commissioning shutdown project
Replacing of defective pressure gauge
Replacing defective thermocouple.
Inspection and verification of Electrical/Instrumentation Materials as per construction package.
Factory Acceptance Test,Site Acceptance Test, loop checks, functional test and commissioning of Instrumentation Works.
Installation of cable trays, conduits, transmitters, junction box, marshalling cabinets, dcs panels, pneumatic tubing, impulse lines and pneumatic air system.
Termination of field instrument, junction box and marshalling panels.
Calibration, loop checking, troubleshooting and pre-commissioning and commissioning.
Quality control and instrumentation design review competence inclusive of engineering drawings, such as. P&ID, ILD, datasheets, loop drawing, logic control diagram and hook-up drawing
Competency to issue Non-Conformance Reports with respect to instrument works to subcontractor and/or Vendor Personnel for rectification and/or back charge.
Trained in Plant safety
Team leadership and supervisory work experience.
Basic Practical Electricity Training Course
Republic of the Philippines/Department of Education, Culture and Sports
Bureau of Non-formal Education Region, Region V
February 10 – 17, 1990
NMYC, Certificate of Training (Electrician)
Republic of the Philippines/Department of Labor and Employment
MTC & PMPO, PEO Compound Masbate, Masbate
April 06, 1990
Building Wiring Electrician SEA BMB Consultants, Inc.
Republic of the Philippines/Department of Labor & Employment
Pambansang Sanggunian sa Laang-Bisig at Kabataan
April 20-23, 1990
Crude & Vacuum Heater Replacement
Saudi Aramco
Riyadh Refinery, K.S.A.
October 29, 2003
Calibration for Process Instrumentation
Meralco Foundation, Inc.
August 26, 2006 to September 30, 2006
Instrumentation and Control Servicing
Technical Education and Skills Development (NCII)
March 16, 2013
Electro-technical Institute
Instrumentation and Control Servicing NC II
January 7 – February 15, 2013
Masbate Colleges
Liberal of Arts
1990 - 1992
Electrical Technology
Bicol University School Of Arts And Trades, Legazpi City
1992 – 1994
Date Of Birth : March 14, 1972
Place of Birth : Masbate, Masbate
Gender : Male
Civil status : Married
Height : 5’5”
Weight : 143 lbs.
Religion : Christian
Nationality : Filipino
SSS No. : 33-6294656-6
Tin No. : 924-178-036
Passport no. : P1938366A
Phil. Health no. : 19-025811189-7
Person to be notified In case of emergency
Name : Marietta R. Viterbo
Address : 129 Goma Bagumbayan st
Masbate,City.
WORKING EXPERIENCES
PROFESSIONAL SKILLS
TRAININGS ATTENDED
EDUCATIONAL BACKGROUND
PERSONAL PROFILE
CHARACTER REFERENCES
Eng’g. Lorenzo R. De Leon
Chemical Supervisor/SMC Global Power
SMC Global Power
Mr. Young Chul Cho
E & I Manager Dealim
Engr. Adrian Reyes
Trainor Specialist
Mrs. Decena L. Coronel
Company Nurse/ Petron Bataan Refinery
SMC Global Power
Contact this candidate