GULAM MAHMOOD
Instrument and Control Engineer
With 30 years of experience in Power /Desalination /Petrochemical plants E-mail: adzg6t@r.postjobfree.com
Mobile: +966*********
Experience Summary:
Worked as a Senior Instrument and control Engineer/Consultant in power and water utility/petrochemical sector for plants Operation and maintenance(O&M)/ Plant shutdowns and turnarounds /Engineering /Procurement/Construction fields
Worked as a direct employee For SABIC & Marafiq.
Worked as a Supplement Manpower / Consultancy for the various clients like Marafiq, SABIC, ARAMCO, SWCC, Kuwait Ministry of electricity and water Experience details
# Company Duration Details
1.
From June
2023 to till
date
Working as an Electrical/Instrument and Control
Engineer in ILF Consulting Engineer Company for
National Water Company for Water Quality
improvement project at site Qatif#2.
2.
From Oct 2020
to Feb 2023
Worked as an Instrument and Control Consultant
in Advance Design and Engineering consultant in
Hyderabad TS India.
3.
From Jan 2012
to Feb 2020
worked in Power and water utility Company Yanbu -
Marafiq as a Sr.Instrument Engineer, Maintenance
Technical Support Section as a direct employee.
4.
From May
2011
to Oct 2011
Worked as an Assist Resident Engineer –
Instrument and Control Engineer in Jacob Zate for
Marafiq Project Implementation Department Yanbu
for small projects.
5.
Feb 2010
to March 2011
Worked as a Senior Instrument and Control
Engineer in ILF Consulting Engineers for SWCC
Shuqaiq Phase II Water Transmission System
Project.
6.
From June 07
to June 09
Worked as a Project Staff Engineer in Saudi Basic
Industries Corporation-SABIC for Shared service
Engineering & Project Management Department in
Saudi Methanol Company and National Industrial
Gas Company Jubail. [ Direct Employee]
7.
From Oct 02
to Jan 07
Worked as an Instrument Field Engineer for Power
and Water Utility Company for Jubail- MARAFIQ,
Saudi Arabia, through SRACO Company.
8.
From Dec 98
to Aug 02
Worked as a Senior Instrumentation Engineer in
Kharafi National Company-Kuwait for Kuwait
National Petroleum Company, Kuwait Ministry for
Electricity & Water distribution project (MEW
Project) distribution projects.
9.
From Dec 96
to Nov 97
Worked as an Instrument Engineer for Saudi
ARAMCO DCS Upgradation Project {Pkg-5}
Rastanura Refinery through SA Kent Co KSA.
10.
From Dec 93
to Jan 96
Worked as an Instrumentation Engineer in Zamil
Operation and maintenance company/Saudi Oger
for Royal Commission Potable water project Jubail.
[Presently Marafiq].
11. Utility plant
From Sep 89
to Sep 93
Worked as an Instrument Engineer at Medchal
Chemicals & Pharmaceuticals Private Limited India, for Boiler & Utility Plant Division.
QUALIFICATIONS
Bachelor of Engineering in instrumentation Technology-1989 Batch Certified by Saudi Council of Engineers bearing membership ID #119537 FAMILIAR SYSTEMS / PLANTS/ PROCESSES
PROCESS PLANTS FAMILIAR SYSTEMS
Saudi Engineering council (SCE) Accredited.
Skilled in Various Field Instrumentation, Process Analyzers,
Worked with DCS Systems such as Yokogawa Centum VP,ABB Symphony Harmony, Bently Nevada Vibration Monitoring System (VMS), Rotork SCADA System, Exaquantum Process Information Management System.
Worked with Emergency shutdown systems (ESD) includes YOKOGAWA Prosafe / Triconex / TMR
Worked with PLC Systems such as Allen Bradley, Omron, Mitsubishi, Siemens.
Process plants
Steam turbine generators
Compressor control system
Boilers / Heaters
RO systems
HRSG
Sea water cooling pumping stations
Potable water Pumping stations
Multi effect Desalination/multi stage flash desalination Roles And Responsibilities In Plant Maintenance
Review SAP notifications, provided by planning sections for the repetitive problems in the plant. Evaluate root cause and hence prepare a report indicating the solution for the chronic problems.
Involve in 5 Why’s study proposed by Business units related to chronic repetitive process or equipments.
Provide required data for the root cause analysis.
Involve in Hazop study and hence ensure all the recommendations are compiled and implemented by the EPC contractor
Involve in the RCA studies proposed by business unit for the complex problems and facilitated by API department for the incident capture, problem analysis, root cause analysis and solution development.
Prepare maintenance procedures proposed by RCA team
Implementation of IPF [Instrument protected function] as per SIL study report.
Review of TSR documents, Ongoing projects 30%, 60%,90% and Issued for Construction packages and provide the comments and also ensure that all comments being raised are incorporated by the contractor.
Review of specifications provides by OEMs
Review of O&M manuals, As built drawing and all project related deliverables.
Prepare response to the inter department MEMOs as per the subject.
Prepare Scope of work for the maintenance projects.
Review of all instruments acceptance documents as follows
Instrument Loop Diagram. (ILD)
Piping and Instruments Diagrams (P & ID)
Instrument Process & Pneumatic hook up drawings.
Instrument data sheets and alarm set points.
Vendor documents etc.
Engineering and Projects Responsibilities.
Prepare ITB {Issued to Bid} and ITC {Issued to Construct} packages for LSTK
{Lump sum turnkey} Contracts.
Prepare detailed engineering package for plant modification and capital projects which involve Scope Descriptions, project deliverables such as preparation of P&ID and markup, Data Sheets, Instrument plot plan, cost estimation, justification, scheduling, Instrument Specification etc.
Verification (at site) of existing facilities, existing drawings, for preparing detailed reports & documents required to be used as input data for completing design involved in the project
Technical Bid Evaluation, Prepare the Statement of Requirement for contract documents and carries out technical evaluation of contracted out projects including technical clarification to bidders through the Contracts Department and recommend the most successful bidder from Technical point of view.
Review of functional design specification documents of the vendors and Verifying the vendor supplied equipment that includes checking the scope of supply for instrumentation against PR specification and instruments meet the area classifications as specified.
Determine the testing plan, verify the scope and prepare the schedule based on construction completion dates and project schedule requirement. This includes scheduling supplier service engineers as required for initial operation and performance testing.
Review and compare the Instrument Data Base and the Distributed Control System Database and correcting any mismatch between them and reflecting the same on Instrument Loop Diagrams, Logic Diagrams etc.
Preparation of project deficiency report updating the Action Log Software Package accordingly for Corrective Action.
Prepare loop folder consisting of pertinent drawings, project specification, manufacturer instructions required to complete loop check, calibration and test of all plant process measuring instruments and standard testing instruments. FAMILIAR STANDARDS
NFPA, IEC, ISA, ARAMCO & SABIC, Marafiq Engineering Standard. STRENGTHS
Technical writing
Troubleshooting of control panels
Declaration: I solemnly affirm and state that the particulars mentioned above are true to the best of my knowledge, information and belief.
Place: Saudi Arabia
(GULAM MAHMOOD)