Cnc Machinist Machine
Resume:
Dawn Lemke
Plymouth, WI *****
adz4kc@r.postjobfree.com
I am new to the area and I’m looking for full-time employment. I’m looking for my retirement job with a company that appreciates their employees.
I can work any shift and I'm willing to work weekends. I have my own reliable transportation. I enjoy learning new machines and operations and I'm a quick very motivated learner and worker. I have many of my own hand tools and measuring gages/tools. I work well alone, with another or a group. I love the challenges of learning new machines,
I’m willing to be trained on any type of machine and part. After viewing my resume you will see the variety of machines I have operated. If not a machining position, I am willing to learn whatever skills the job needs. I have worked in customer service so I've learned how to deal with difficult people in many different situations.
Authorized to work in the US for any employer
Authorized to work in the US for any employer
Work Experience
Set-Up Technician
Bemis Manufacturing Company - Sheboygan Falls, WI
April 2023 to Present
Set-up plastic injection molding machines- change molds, set water and mold temps, verify the correct material is being used, if applicable verify robot program is correct and the correct fixture for picking parts is on. Start machine to run some parts to do quality checks on. Once an operator has also done quality checks verify theirs are in spec also. Verify they have all needed materials to run and when they are ready start machine and robot up. Monitor that everything has started correctly and good parts are being made.
Troubleshoot issues as they arise
Verify parts are within spec
Perform mold changeovers when required
Quality Control Inspector
Atlas Roofing - Fond du Lac, WI
August 2022 to January 2023
Operate CMM’s to make sure products produced are in spec, do in process quality checks and perform leak tests on the products.
• Communication skills
• Keen eye for detail
• Smart Device literacy (Cell phone, tablet)
• Project Tracking System
• Ability to consistently identify mistakes across thousands of inspections
• Ability to closely follow quality standards
• Decision-making inspection / audit skills as in acceptable / not acceptable features
• Ability to travel to multiple customer facilities
• Ability to properly use basic measuring devices: Calipers, Micrometers, go-no-go gauges, etc.
• Ability to read engineering drawings
Set-Up/Quality Technician
Milwaukee Tool - West Bend, WI
March 2022 to August 2022
Set up a variety of CNC machines- Makino exclusively- for operators to run, change tooling when needed, troubleshoot when needed, correct faults for the machines and robots, verify product is correct for machining, supervise operators on visually inspecting parts, correctly storing the parts how they're supposed to be stored, making sure they are ready to move to the next process. In the quality lab I ran several CMM’s to check a variety of parts made on the floor, plus visual inspections, quarantining parts when necessary and filling out the proper paperwork that was needed, instructing operators on proper techniques and procedures, checking in process parts on the floor.
• Communication skills
• Keen eye for detail
• Smart Device literacy (Cell phone, tablet)
• Project Tracking System
• Ability to consistently identify mistakes across thousands of inspections
• Ability to closely follow quality standards
• Decision-making inspection / audit skills as in acceptable / not acceptable features
• Ability to travel to multiple customer facilities
• Ability to properly use basic measuring devices: Calipers, Micrometers, go-no-go gauges, etc.
• Ability to read engineering drawings
CNC Machinist
Rytec Corporation - Hartford, WI
October 2021 to February 2022
I machined the parts used to assemble the high-end overhead doors assembled and sold by the company CNC Machinist/Operator
HERKER INDUSTRIES - Menomonee Falls, WI
May 2021 to September 2021
Set up and operate different machines to create many different types of parts for many different customers to their specifications; tool changes, troubleshoot, etc. I ran Okumas, Mori Sekis, CNC Machinist/Operator
Mercury Marine - Fond du Lac, WI
February 2021 to April 2021
Operate, troubleshoot and changeover machines- 2 Okumas, DeHoff gun drill and a Mori Seki- for creating prop shafts for boat motors. Continuous quality checks done throughout shift. Cashier/Manager
Hartford Mobil - Hartford, WI
May 2020 to November 2020
I came upon an opportunity to work at the gas station right next to where I live so I decided to try it out. I was able to walk there in approximately 10 seconds. I enjoyed the interaction with the customers and have met many amazing people. I'm reliable, trustworthy and get along with my co-workers. I'm able to deal with "difficult" people while keeping a cool head. I've also worked at a nail, hair and tanning salon. CNC Machinist/Laser Operator
Matenaer Corporation - West Bend, WI
April 2020 to May 2020
I took this job thru a temp agency and was told it would lead to full time when I started working for this company. I was originally told I was going to be a CNC machinist in their CNC department but when someone saw I had laser experience they decided to move me to the fabrication department where they have their laser and brake presses.
The month I worked there all I did was hand grind parts and ran a brake press a few times. May 11 I was told they didn't need me anymore.
Laser Operator
JD LASER INC - Hartford, WI
January 2020 to April 2020
Operate a laser press to produce parts per customer orders and specifications, set-up/changeover and troubleshoot, I operated a Hank Wang laser with some experience on Amada's. I have my own tools and toolbox with my own gauging tools. Use a Vertek machine to do quality checks on parts plus do my own quality checks with personal gauging tools.I left for the job at Matenear. CNC Machine Operator
Steel Craft Corporation of Hartford - Hartford, WI July 2019 to November 2019
Operate, trouble shoot, set up/change over Haas CNC machines to machine parts to customer specifications, did my own quality checks using blueprints, have my own tools plus measuring tools- calipers, micrometers, etc. I was laid off when work slowed down. CNC Machinist
Weasler Engineering - West Bend, WI
April 2019 to July 2019
Set-up and operate CNC machines to produce many different parts for customers per their specifications. I operated a Broach machine, a Haas CNC machine and a Radyne Heat Treat machine. I used blueprints and various hand tools to check that my parts were to spec. Left for job at Steel Craft. CNC Machine Operator and Assembler
Harley-Davidson Motor Company - Menomonee Falls, WI January 2000 to December 2018
Assembly-
I have operated automated lines to assemble components to the crank case/engine for complete and final assembly, verification of proper assembly parts, operated IPV testing booth, also hot tested engines before we installed the IPV testers, I have operated overhead cranes/lifts to put powertrains into shipping racks, used different varieties of lifts pertaining to whatever job and motor line (FL or XL motors) I was on, used air powered hand tools to assemble needed parts to/on motors, assembled offline jobs for the main assembly of the motor, also helped repair motors that were incorrectly assembled. CNC Machining-
I have operated CNC machining cells to produce parts for engines or transmissions. First was the main shaft machining cell-I was responsible for 13 machines (Emag vertical turning center, Trichromatic Textron Spline roller, Gleason shaper and hob machines, DeHoff Gun drills, Edmunds gauge, 2 ABB robots and a Gudel overhead robot/gantry, Rachmaninoff water wash) for machining main shafts for transmissions. Also used hand gauges (micrometer, calipers, height gauges, depth gauges, feeler gauges, ring gauges, go/no go gauges, thread gauges, indicators, depth gauges) to check sizes of certain dimensions, used computerized programmed spec checking machines (Hommel and Klingelnberg) to keep track of sizes, replaced dull or broken tooling, performed tool changes, made offsets to keep parts in spec, maintain machines for proper operation, used overhead lifts/cranes. I have also ran CNC machining cells for machining flywheels in FL motors (2 robots and 6 machines- Mori Seiki CNC machines, DeHoff gun drills) and gear covers for XL motors (3 Mori Seki machines, 2 for roughing and 1 for finishing) and many of the operations and spec checks were similar to what was required of me in main shafts. Used a CMM quality check machine. I have taken and passed the following classes taught by WCTC instructors- Blueprint Reading
Gauging
Shop Math
Basic CNC Machining class
Basic machining using lathes and mills
Brake Press Operator, Material Handler
Mayville Engineering Company - Mayville, WI
September 1997 to January 2000
Ran brake and punch presses to create parts for customers per blueprints and specs required in brake press department.
Drove forklift in welding department, pulling parts and paperwork needed for welders to complete job orders, took welded/finished parts to next department for next step or to dock for shipping. Left for job at Harley.
Production Worker
West Bend Company - West Bend, WI
August 1992 to September 1997
Worked in the high end cookware department where we produced a variety of different sized cookware doing a variety of jobs:
Brake Presses
Punch Presses - Sanders, KY
Spot Welders
Internal High-lighters
Buffers
Final Assembly
Education
High school diploma
Mayville High School - Mayville, WI
August 1985 to June 1988
Skills
• ISO 9001
• Brake Press
• Quality assurance
• Quality assurance
• Quality systems
• Continuous improvement
• Cnc Machine
• Machining
• Assembly
• Crane Assessments Mechanical Knowledge -- Highly Proficient May 2020 Understanding and applying mechanical concepts and processes. Full results: Highly Proficient Mechanical Skills: Monitoring -- Proficient March 2020 Monitoring machine indicators to determine appropriate functioning. Full results: Proficient Creating Presentations with Microsoft PowerPoint -- Familiar May 2020 Knowledge of Microsoft PowerPoint tools and features. Full results: Familiar Numerical Reasoning Skills -- Proficient May 2020 Quickly and accurately performing basic mathematical operations, recognizing numerical sequences, and interpreting graphs. Full results: Proficient Following Directions -- Highly Proficient May 2020 Following multi-step instructions. Full results: Highly Proficient Project Management Skills: Budgeting -- Highly Proficient May 2020 Managing project budgets by appropriately allocating and monitoring financial resources. Full results: Highly Proficient Supervisory Skills: Interpersonal Skills -- Expert May 2020 Fostering a collaborative environment and conducting difficult conversations. Full results: Expert Project Management Skills: Time Management -- Highly Proficient May 2020 Prioritizing and allocating time to effectively achieve project deliverables. Full results: Highly Proficient Organizational Skills -- Proficient March
• assignment/xjbfrxtugbbnudpu Indeed Assessments provides skills tests that are not indicative of a license or certification, or development in any professional field.
• Mechanical knowledge
• Quality systems
• Stamping Press
• Laboratory experience
• Quality control
• ISO 9001
• Forklift
• Quality audits
• Transmissions
• Fanuc
• Lean Manufacturing
• CNC Laser Cutting
• Quality control
• Vertical and Horizontal Axis (10+ years)
• Micrometer
• Heavy Lifting
• CMMS
• Mechanical knowledge
• Calibration
• Cnc Mill
• Blueprint Reading
• Cnc Lathe
• Cnc Machine (10+ years) Assessments Mechanical Skills: Aptitude
• Forklift
• CNC
• Manufacturing
• Calipers
• Proficient December 2019 Understanding and applying mechanical concepts and processes. Full results: https://share.indeedassessments.com/share
• Coordinate Measuring Machine
• Quality Inspection
• Precision measuring instruments
• Quality audits
• Precision Measuring Instruments
• Blueprint reading
• Dimensional inspection
• Forklift
Contact this candidate