Quality Engineer Supplier
Resume:
Michael Korzek
P.O. ******
W. Melbourne, Fl ****2
adz0z6@r.postjobfree.com
adz0z6@r.postjobfree.com
PROFESSIONAL EXPERIENCE:
Verify for BRP Marine Group, Irving, Texas 12/22 – 3/23
Supplier Quality Engineer Consultant (Remote)
SQE and Approver of PPAPs for Marine Group Pontoon Boat BRP, Inc.
Utilized PPAP Tracker, PPAP Manager Database.
Reviewed and Approved 65 PPAPs from Boat Suppliers
Worked with Suppliers on Dimensional Issues
Requested PPAP Documents based on Level 3 PPAPs
Oversaw PPAP Checklists and Requests from Suppliers
Reviewed Supplier Scoring and PPAPs from ASL
Lancesoft Recruiting for Medtronic, Santa Ana, Ca 6/22 – 10/22
Supplier Quality Engineer Consultant (Remote)
Participated in Corrective Action Resolutions for NCR Reports
Utilized Agile MAPs
Organized PPA activity for new Supplier for Capere Project
FDA Compliance with 21 CFR 820 and ISO13485 Extensive Training
Participated in Kick off
Oversaw PPAP Checklists ADPs and documentation for Project.
Reviewed Supplier Scoring and PPAPs from ASL
Oxford Global Resources for West Pharmaceutical, Scottsdale, AZ 1/22 -5/22
Supplier Quality Engineer Consultant (Remote)
Participated in Corrective Action Resolutions for NCR Reports for Doser 2.0
Utilized Master Control and SAP
Participated in 8-D Corrective Actions and 5 Why Problem Solving for Supplier Quality
Revised Process Flow of NCR Process
FDA Compliance with 21 CFR 820 and ISO13485 Extensive Training
Participated in Pre-Audit and Approvals
Needle and Self Dosing Commodities and Equipment
Updated Status and Audits for ASL
JBL Resources,*Contract for Stryker, Leesburg, VA 7/19 – 9/21
Senior Supplier Quality Engineer (Remote)
Remediation and EUMDR Audit Preparation
EUMDR Pre-Audit Preparation and Supplier Contact
Reviewed Supplier Database and Documentation for FAIs and PPAPs
Gap Analysis and Audits for Medical Manufacturing
Created PFMEA and MSDS Documentation and Tracker
FDA Compliance with 21 CFR 820 and ISO13485 Extensive Training
Participated in Pre-Audit and Approvals
Knee and Hip Commodities
System One, (Contract for Alstom Inc, Melbourne, FL) 3/18 – 03/19
Field Quality Engineer Quality Engineer
Field Quality Engineer for All Aboard Florida Trains
Audited Test Documentation for Phase 1 of PTC and Crossing Guards
Audited Completion of 40 plus Tests
Reviewed Documentation for Each Electronic Bungalow
Reviewed File Folders For Each Location from Miami To West Palm Beach
Notified Project Leader and Quality Dept. of Effective Updates
Noramtech Recruiting, (Contract for Zimmer, Warsaw, In) 3/17 – 10/17
Senior Supplier Quality Engineer
Supplier Quality Engineer for Trauma Transfers
Completing and approving PPAPs Part approvals 4 Phases
FDA Compliance with 21 CFR 820 and ISO13485 Extensive Training
Participated in Pre-Manufacturing and Approvals
Knee and Hip Commodities
Created Receiving Inspection Plans for FAI in Compliance with ISO 9001, ISO 13485
Completed IIS and ZWI Written Instructions
SPC &GD&T Compliance Gage R&Rs
Approved FALs, PPAPs PFMEAs Validations
Oversaw PPAP Checklists and Requests from Suppliers
Electronic and wire harness supplier audits and quality improvements, PPAPs
AS9100 ISO 9000 Audits and compliance with Suppliers
SPC &GD&T Compliance QMS Updates.
Supervised Inspectors Completed Approved FAIs, In Accordance with ISO9001
Reviewed and updated ASL and Top Quality Issues
Toyota Automotive, Mississippi 6/15 – 12/16
Supplier Quality Engineer
Supplier Quality Engineer for Toyota Camry Quality Issues, Supplier Concerns
Participated in Engineering change approvals
Completed and approved PPAPs Part approvals
Initiated Quality Holds 100% Inspection of Non-conforming parts
Continuous Process Improvement Audits and Process Improvement for Suppliers
Participated in ISO 9000 Internal Audits
Requested CARS Corrective Action Responses.
Utilized 8 – D Corrective Actions Problem-Solving from Suppliers
SPC &GD&T Compliance
Approved FAIs, PPAPs
Idexcel, Sarasota, Fl (Contract, Honeywell)
Senior Supplier Quality Engineer
5/14 – 1/15
Supplier Quality for Entertainment sub-components.
Oversight of 100% testing and 8-D responses to customer concerns.
Conducted receiving inspections and further quality testing of entertainment units.
Condjucted Continuous Improvement of Manufacturing and Quality
Reviewed Quality Matrix and Report to Management
Bombardier, Inc, Palm Bay, Fl 11/11 – 5/14
Supplier Quality Engineer
Supplier Quality Engineer for Sea Doo Boats Quality Issues, Supplier Concerns
Participated in the development of new technologies and supply base
Support implementation of the Supplier Rating System for the Sea Doo Boat supply base.
Evaluate and improve Quality Systems at assigned suppliers using best practices
Continuous Improvement Process Improvement in Plant Manufacturing
Conducted On-Site Supplier Audits for Top 10 Suppliers
Created, monitored Supplier Ratings from monthly PPM, Commercial, Delivery Scores
Requested CARS Corrective Action Responses.
Utilized 8 – D and Six Sigma other Problem-Solving from Suppliers
Utilized NEC checking codes for electronic software
Electronic and wire harness supplier audits and quality improvements, PPAPs
AS9100 ISO 9000 Audits and compliance with Suppliers
SPC &GD&T Compliance Updated QMS and Supplier Scoring
Supervised Inspectors Completed Approved FAIs, In Accordance with ISO9001
Piper Aircraft, Inc, Vero Beach, Fl 5/10 – 10/11
Supplier Quality Engineer /Quality Manager
Supplier Quality Engineer for Aircraft Vendor Quality Issues, Aerospace, Avionics
Manager over 8 FAI Inspectors, Supervised Inspections, ISO 9001, ISO 13485
Issued Purchase Orders for Supplier Non-conformances and Corrective Actions
Continuous Improvement Process Improvement and Standardization in Manufacturing
Conducted On-Site Supplier Audits as needed.
Updated and reviewed Supplier Quality Management Manual
Responded to FAA audits, and requested CARS Corrective Action Responses.
Conducted AS9100, ASCEP internal Audits.
Corrective actions, Containment for Plant spills, Authorizing Stock sweeps
.Continuous Improvement and Process Improvement for Suppliers
Utilized Red X, DOE and other Problem-Solving
Utilized NEC checking codes for electronic software
Updated QMS and SQE Manuals, PPAP Sy
AS9100 ISO 9000 Audits and compliance with Suppliers
Approved FAIs for Jet Program, PPAPs
SPC &GD&T Training
Supervised and Approved Machined Parts and FAI
Performed Annual Audits and Updated ASL Approved Supplier List
Belcan Inc, Novi, Mi 12/07 - 04/09
Six Sigma Warranty STA Specialist (Ford)
Responsible For Warranty reduction For Michigan Truck, Kentucky Truck, Mustang and Wayne Assembly Plants
Performed Plant Audits To Reduce R/1000 Issues
Reviewed BSAQ ECB Top 100 Warranty Issues
Coordinated with Suppliers PVT Engineers To Resolve Warranty Issues
Gathered Data For 6 Sigma Resolutions and 8-D Resolutions
Completed 6 Panel Power Point Presentations with Corrective Action
Access to Ford AWS system for Warranty Analysis
Volt Inc, Southfield, Mi
Supplier Quality Engineer, Quality Engineer 1/00 - 12/07
PPAPs, 7, 8 Ds for CNC machined ABS components Air Bags
Managed new programs for PSA, Ford, DCX
Championed Process and production rate improvement
Internal, Supplier and TS16949 Audits
Worked as Launch Support and Customer Liaison for ABS units
Warranty DFMEA, PFMEA and CIM testing
Root Cause Containment, Corrective Actions on Customer issues
ABS Brake Milling, unit testing, Benchmarking and Supplier visits, audits
Corrective actions, Containment for Plant spills, Continuous Improvement
Worked on RS min-van HVAC, I/P issues with Valeo
Resolved Program Launch Issues for RS Mini-Van ND Truck
On Site SQE Customer involvement for DCX.
APQP and PSO, Run @ Rate and Production improvement.
Continuous Improvement Process Improvement and Standardization.
Monitored Level 1 and Level 2 Audits
FMEAs PPAPs extensive Supplier Contact
Audit and Improvement of Suppliers Quality Systems design improvements
Warranty and Assembly Plant dealer Audits, for Prototype, ramp-up, production
Corrective actions, Containment for Plant spills
Utilized Red X, DOE and other Problem-Solving
Machine process capability establishment
Able to assist in ordering and procuring new machines
Performed Level 1 through Level 5 PPAPs for GM Powertrain components
PPAPed PTU Transfer Case and Transmission components
Used Powertrains PRTS database
Advanced Quality and Program Building of GM transmissions
Created reduction plan for engineering blue print mismatches; approved blue print specifications and layout requirements, including GD&T
Implemented 17 Step GM APQP for steering wheels and front air bags
Deep Dive initiatives and Responsible for PPAP oversight and Supplier Quality Improvement
Tech and Part Reviews Run @Rates conducted
Audit and Improvement of Supplier Quality Systems
Responsible for advanced quality and timing for over 30 programs
Coordinated with suppliers in implementing and performing 17 step APQP process.
Approved PPAPs, run at rates, and oversaw tool moves and design
Participated in creativity teams and sourcing of future programs.
Created and initiated design verification planning and reporting. Corrective actions, Containment for Plant spills
Utilized Red X, DOE and other Problem-Solving
Utilized NEC checking codes for electronic software
Electronic and wire harness supplier audits and quality improvements, ppaps
Ricardo Inc, - Dearborn, MI 1/95 – 12/99
Supplier Quality Engineer – Exterior Group/Weather Strip Commodity
Implemented AQP for NS/RS builds.
Worked on HVAC issues and I/Ps
Quality liaison between Chrysler plants and suppliers.
Implemented and monitored SPC and GD&T interpretation for weather sealants.
Initiated seven step and PPM reduction; created and initiated design verification planning & reporting.
Corrective actions, Containment for Plant spills
Implemented advanced product quality planning of Ford UXI 68 electric build including preparation and receiving Ford Q1 Award.
Initiated corrective action and continuous improvement.
Acted as Quality Liaison and functioned as SQA for suppliers.
Performed complete quality audits of American Axle for Electric Transaxle.
Approved Supplier 8 D Quality Issues
Process standardization and problem solving for Chrysler JNAP
Problem solving for Jeep Cherokee J.D. Power
Communicated with vendors, engineers, and design
Responsible for Powertrain, drivetrain axle, chassis, and interior
Resolved body dimensional issues utilizing blue print reading, GD&T, and CMM
Corrective actions, Containment for Plant spills
EHI Elicon - Madison Heights, MI 1/94 – 12/94
SPC Coordinator
Supervised SPC procedures and monitored data for Ford
Trained quality staff in Ford Q1 requirements
Operated CMMs and conducted ballooned blueprint for layouts
Conducted 8-D quality and auto investigative action procedures
Performed gage R&R, design of experiments, and interpreting GD&T
Corrective actions, Containment for Plant spills
Participated in Continuous Improvements and Process Improvements of Manufacturing
Electronic and wire harness supplier audits and quality improvements, PPAPs
Walway Company - Southfield, MI 9/90 – 11/93
Quality Engineer/Manager
Supervised, trained, and monitored SPC data
Operated CMMs and ballooned blueprints for layout
Interpreted GD&T and resolved dimensional issues
Assisted in the building and layouts of checking fixtures
Provided complete PPAP information to suppliers prepared for Ford Q1, Target, and Chrysler audits
Corrective actions, Containment for Plant spills
Trained employees in SPC, Problem Solving
8 D Responses To OEM Quality Issues
D.G.E., Inc. - Troy, MI (Chrysler) 9/86 – 7/90
Assistant Coordinator
Supervised and coordinated electrical department for Jeep truck prototypes Communicated between engineering and build departments
Scheduled build supplies and quality issues
Utilized DBase, Lotus and Word Perfect
Communicated between engineering and Quality departments
Approved Material Review Board Parts and Rework of Parts
Used close tolerance inspection gauges and ballooned blueprints for layout
Interpreted GD&T and resolved dimensional issues
Assisted in Inspection and Quality responses
Utilized DBase, Lotus and Word Perfect
EDUCATION:
Oakland University - Rochester, MI
B.A. Pre-Law/Business
Central Michigan University – Troy, MI
MSA Studies in Quality Management
AFFILIATIONS/ORGANIZATIONS:
ASQ Member
ASQ Certified Quality Auditor and Certified Quality Engineer Courses
Seminars in TQM, D.O.E. and APQP
Seminars in AS9100, 9102, ISO 9000, 9002 ISO13485 QS9000, TS16949, ISO9000
FDA Compliance with 21 CFR 820 Training ISO 13485 Training
Contact this candidate