GTAW/SMAW WELDER
Resume:
JAYMEL V. BENSIG
Welder – SMAW and GTAW
Magdugo, Toledo City, Cebu Philippines
Contact number: 095********
OBJECTIVE:
To be employed as welder, where I can enhance my ability and skill in the field of welding practice and at the same time become an asset to the company by providing work of high quality and based on standards.
SUMMARY OF QUALIFICATIONS:
13 years of experience as welder of pipes, I beam plates and columns both for power plants and other industries.
Passed 4 out of 4 welding tests conducted by FORMOSA heavy industries for SMAW and GTAW 6G welding. Visual with Radioactive test.
Experience in Fabrication and site installation of piping pressure vessels, ladders, trusses etc.
Attend multi safety orientations for construction of Power plants where basic safety protocol is discussed such as, Used of PPE, working in heights, hot works, lifting and scaffolding.
Team player, strong analytical skills, hardworking and dedicated.
Proficient in English, Filipino and Bisaya both written and oral.
Can work in the following computer applications
i. Microsoft Office Applications
ii. Internet Browsers
iii. Adobe PDF
SPECIAL SKILLS:
Can work under pressure with less supervision.
Cooperate and team Player
Flexible and hard working
Can interpret installation and ISO drawings
EDUCATION:
Secondary
Magdugo, National High School (2007)
Elementary
Magdugo, Elementary School (2001)
PERSONAL INFORMATION:
Gender: Male
Age: 34 years old
Birth Date: February 23, 1988
Birth Place: Toledo City, Cebu Philippines
Nationality: Filipino
Civil Status: Married
Religious Affiliation: Roman Catholic
Height: 5’5
Weight: 62 kgs
REFERENCES:
Engr. John Eduard G. Carino Mr. Robin Liu
****.******@****-****.*** **********@***.***
Project Manager Project Manager
AKOH Energy Services Corporation Hwa Jann Enterprise
Quezon City Metro Manila Philippines New Taipei City Taiwan
Engr. Arnold B. Torres Mr. Tsung- Yi Lin
Project Manager General Manager
Vineyard Construction Jiewei Construction
Cebu City Philippines Phase 2 San Antonio Heights
Sto. Tomas Batangas Philippines
WORK EXPERIENCES:
Welder (GTAW and SMAW) Pipe fitter
JIEWEI Construction Corporation
Imelda, Tasia St. Samal Bataan, Philippines.
January 2020 – June 2022
Project Description:
Installation of High-pressure piping and valves for the Turbine house of the 2X150 MW power plant.
Duties and Responsibilities:
a) Welding of 5-inch, 4-inch, 2.5-inch piping using GTAW for butt joints 6G position.
b) Welding of 5-inch, 4-inch, 2.5-inch piping using SMAW for flange 5G position.
c) Interpret Drawing in the absence of the pipe fitter and General Foreman.
d) In charge of the fabrication in the absence of the assigned leadman.
e) Welding of stainless Air piping for a working pressure of 7MPa for instrument air.
f) Assist in the erection, fit up and setting of pipe support and piping.
g) Assist in the preparation of materials and setting up Pneumatic Testing for the installed piping.
h) Assist in the installation of instruments and tubing such as, level switch, pneumatic panel boards.
i) Repair defective welding works after pneumatic testing.
Welder (GTAW and SMAW) Pipe fitter
JIEWEI Construction Corporation
Phase 2 San Antonio Heights,
Sto. Tomas Batangas Philippines
July 2016 – December 2019
Project Description:
Installation of high-pressure piping and valves for the Turbine house of 2x150 MW power plant.
Duties and Responsibilities:
a) Welding of 5-inch, 4-inch, 2.5-inch piping using GTAW for butt joints 6G position.
b) Welding of 5-inch, 4-inch, 2.5-inch piping using SMAW for flange 5G position.
c) Interpret Drawing in the absence of the pipe fitter and General Foreman.
d) In charge of the fabrication in the absence of the assigned leadman.
e) Welding of stainless Air piping for a working pressure of 7MPa for instrument air.
f) Assist in the erection, fit up and setting of pipe support and piping.
g) Assist in the preparation of materials and setting up Pneumatic Testing for the installed piping.
h) Assist in the installation of instruments and tubing such as, level switch, pneumatic panel boards.
i) Repair defective welding works after pneumatic testing.
Welder (GTAW and SMAW) Pipe fitter
AKOH Energy Services Corporation/ Hwa Jann Enterprise project Panat Energy Development Corporation 3 Power Plant.
Ignore Lapaz, Iloilo City Philippines
January 2016 – June 2016
Project Description:
Installation of Hwa Jann Enterprise System in the 150 MW Power Plant, Installation of 5”, 4”2” and 1” ash and air piping for bottom ash, fly ash, Sand and limestone transfer system, including the needed equipment, panel boards I, conduits and wiring as indicated in the drawings provided by HCE.
Duties and Responsibilities:
a) Welding of 5 inch, 4 inch, 2.5 inch piping using GTAW for butt joints 6G position.
b) Welding of 5 inch, 4 inch, 2.5 inch piping using SMAW for flange 5G position.
c) Interpret Drawing in the absence of the pipe fitter and General Foreman.
d) In charge of the fabrication in the absence of the assigned leadman.
e) Welding of stainless Air piping for a working pressure of 7MPa for instrument air.
f) Assist in the erection, fit up and setting of pipe support and piping.
g) Assist in the preparation of materials and setting up Pneumatic Testing for the installed piping.
h) Assist in the installation of instruments and tubing such as, level switch, pneumatic panel boards.
i) Repair defective welding works after pneumatic testing.
Welder (GTAW and SMAW) Pipe fitter
Wan Hong / Boyi
San Miguel Consolidated Power Plant
Malita, Davao Del Sur Philippines
June 2015 – December 2015
Project Description:
Installation of high-Pressure piping and valves for the turbine house of the 2x150 MW power plant.
Duties and Responsibilities:
a) Welding of 20–24-inch piping using GTAW 6G position which is subject for radioactive test.
b) Repair defective welding works after radioactive testing
Welder (GTAW and SMAW) Pipe fitter
AKOH Energy Services Corporation/ Longing China
ANDA Power Plant Electro Static Precipitator Installation
Brgy. Bundagol, Mabalacat Pampanga Philippines
January 2015 - May 2015
Project Description:
Installation of Hwa Jann Enterprise System in the 150 MW Power Plant, Installation of 5”, 4”2” and 1” ash and air piping for bottom ash, fly ash, Sand and limestone transfer system, including the needed equipment, panel boards I, conduits and wiring as indicated in the drawings provided by HCE.
Duties and Responsibilities:
a) Welding of 5 inches, 4-inch, 2.5-inch piping using GTAW for butt joints 6G position.
b) Welding of 5 inches, 4-inch, 2.5-inch piping using SMAW for flanges 6G position.
c) Welding of stainless Air piping for a working pressure of 7MP’s for instrument air.
d) Doing pipe fitter works in the absence of the pipe fitter.
e) Repair defective welding works after pneumatic testing.
f) Assist in the commissioning activities and rectification of punch listed items.
Welder (GTAW and SMAW) Pipe fitter
AKOH Energy Services Corporation/Hwa Jann Enterprise Project
Aboitiz TSI Project
Toril Davao Del Sur Philippines
JUNE 2014 – DECEMBER 2014
Project Description:
Installation of Hwa Jann Enterprise System in the 2 units of 150MW Power Plant.
Installation of 5”, 4” 2” and 1” ash and air piping for Fly ash, Sand and limestone,
Transfer System, including the needed equipment, panel boards, conduits and wiring as indicated in the drawings provided by HCE.
Duties and Responsibilities:
a) Welding of 5-inch 4-inch 2.5-inch piping using GTAW for butt joints 6G position.
b) Welding of 5-inch 4-inch, 2.5-inch piping using SMAW for flanges 6G position.
c) Welding of Stainless Air piping for a working pressure of 7MPa for instrument air.
d) Doing pipe fitter works in the absence of the pipe fitter.
e) Repair defective welding works after pneumatic testing.
f) Assist in the commissioning activities and rectification of punch listed items.
Welder (GTAW and SMAW) Pipe fitter
AKOH Energy Services Corporation/ Hwa Jann Enterprise Project
Toledo Power Corporation (Global Power Corporation)
Toledo City, Cebu Philippines
January 2014 – May 2014
Project Description:
Installation of Hwa Jann Enterprise System in 1 unit of 80 MW Power Plant
Installation of 5”, 4”, 2” and 1” ash and air piping for Fly ash, Sand and limestone
Transfer system, including the needed equipment, panel boards, conduits and wiring as indicated in drawings provided by HCE.
Duties and Responsibilities:
a) Welding of 5-inch 4-inch 2.5-inch piping using GTAW for butt joints 6G position.
b) Welding of 5-inch 4-inch, 2.5-inch piping using SMAW for flanges 6G position.
c) Welding of Stainless Air piping for a working pressure of 7MPa for instrument air.
d) Doing pipe fitter works in the absence of the pipe fitter.
e) Repair defective welding works after pneumatic testing.
f) Assist in the commissioning activities and rectification of punch listed items.
Welder (GTAW and SMAW) Pipe fitter
AKOH energy Services Corporation /Hwa Jann Enterprise Project
Petron Refinery
Bataan, Philippines
November 2013 – December 2013
Project Description:
Installation of Piping for Hwa Jann Enterprise System
Duties and Responsibilities:
a) Welding of 5 inches, 4-inch, 2.5-inch piping using GTAW for butt joints 6G position.
b) Welding of 5 inches, 4-inch, 2.5-inch piping using SMAW for flanges 6G position.
c) Welding of stainless Air piping for a working pressure of 7MP’s for instrument air.
d) Doing pipe fitter works in the absence of the pipe fitter.
e) Repair defective welding works after pneumatic testing.
f) Assist in the commissioning activities and rectification of punch listed items.
Welder (GTAW and SMAW) Pipe fitter
Vineyard Construction /Hwa Jann Enterprise Project
Bataan, Philippines
December 2012 – October 2013
Project Description:
Installation of piping for Hwa Jann Enterprise System.
Duties and Responsibilities:
a) Welding 5-inch, 4-inch, 2.5-inch piping using GTAW for butts’ joints 5G position.
b) Welding 5-inch, 4-inch, 2.5-inch piping using SMAW for flanges 5G position.
c) Welding of Stainless Air piping for a working pressure of 7MP’s for instrument air.
d) Doing pipe fitter works in the absence of the pipe fitter.
e) Repair defective welding works after pneumatic testing.
f) Assist in the commissioning activities and rectification of punch listed items.
Welder (GTAW and SMAW) Pipe fitter
JACA Construction & Management Corporation
Panay Energy Development Corporation 1 Power Plant
Ignore Lapaz, Iloilo City Philippines
January 2010 – December 2011
Duties and Responsibilities:
a) Weld Groove, welding in overhead position.
b) Weld Groove, weld in vertical & Horizontal Position 6G
Welder (SMAW)
PROMODE CONTRUCTION CORPORATION
Daan Lungsod, Toledo City, Philippines
July 2009 – December 2009
Duties and Responsibilities:
a) Weld Groove, welding in overhead position.
b) Weld Groove, weld in vertical & Horizontal Position 6G
Welder (SMAW)
CTC Construction Corporation
Sangi, Toledo City Cebu Philippines
January 2009 – June 2009
Duties and Responsibilities:
a) Assist in the fit up of Steel beam
b) Assist in the erection
c) Weld Groove, weld in vertical & Horizontal Position 6G
Contact this candidate