CURRICULAM VITAE

OMPRAKASH

H.No.-**/**, Street No.-7, Jawahar Colony,

N.I.T. Faridabad, Haryana-121005 (India)

Contact- 094********, 079********

Email : adyxtw@r.postjobfree.com

adyxtw@r.postjobfree.com

Career Objective:

To obtain a metallurgical position with a steel and iron company and process raw materials for metal products and oversee the production process. I am confident that my experience and personality will be a great asset for your company. Summary of Skills:

Experience in metallurgical department

Expert in material and process selection

Expert in pickling process in Stainless steel wire plant

Heat treatment process control in wire drawing section like Annealing process, Normalizing etc.

Review and control on the production process of wire drawing section.

Expert in spectroscopy technique & mechanical testing

Proficient in quality control and process control

Certified Internal Auditor in ISO Management System (ISO 9001:2015) by TUV Nord

Certified Internal Auditor training program on Laboratory Management System based on Standard ISO/IEC/17025: 2017.

Preparation of PED statistical data analysis

Adept in weld engineering (PQR) and interacting with customers.

Familiarity with IS/ISO, DIN, JIS, ASME and ASTM material standards. Work Experience:

Deputy Manager (Metallurgical Lab)

Dee Development Engineers Ltd., Palwal, Haryana, India

(An ISO 9001:2000 Company, Manufacture of Pipes, Fittings, Spools, Flanges etc.) September 2013 – Present

Routine Activity:

Working as a Lab Head in metallurgical laboratory

Documentation and Key role in accreditation of the Dee’s laboratory through Desktop surveillance & renewal audits held by National Accreditation Board for Testing and Calibration Laboratory Government of India as per ISO-17025:2005.

Develop and evaluate calibration activity of the Laboratory’s Equipments and Plant Equipments also.

Analyze PMI and Portable hardness testing on UCI methods, Rebound method process.

Mechanical testing of metals on UTM Tensile testing machines on properties (Tensile strength, yield strength, % elongation, % Reduction area & also for Bend test, Compression test) as per IS/ASTM standard requirements.

Impact testing as per EN/ISO and ASTM (E23).

Evaluate and perform hardness test on Brinell Hardness Tester, Rockwell Hardness Machine (HRB, HRC, HRA etc.), Vicker Hardness Tester (HV).

Evaluate and perform Intergranular Corrosion Test as per ASTM 262a (Practice B & E)

Evaluate and perform corrosion test as per ASTM G48 method A.

Evaluate and perform corrosion test as per ASTM A923 method C

Hot Tensile test as per ASTM standards.

Develop and perform the techniques of microstructure of low alloy steels, stainless steels etc. and its examination as per requirement. Study of failure analysis.

Use of SEM & Compound microscopes

Perform Ferrite number in stainless steel welding components by Fisher instrument.

Evaluate and perform Welding Procedure specification (WPS) as per EN/PQR or ASME Section-IX requirement

Develop and evaluate the ASME PED Testing as per code requirements such as ASME Section –IX

Evaluate and perform Bend qualification test for the specific customer as per their specific requirements for future orders compliance. For example, some customers are NPCIL, BGR, Siemens, Nooter Ericson, Reliance etc.

Development Activity:

Develop and evaluate metallurgical products, processes, and equipment.

Develop the heat treatment activity on different material grades (P91, P22, P11, C.S.)

Review and find suitable solutions for improving metallurgical process and problems.

Analyze how metallurgical processes can impact products.

Collect and analyze statistics on parameters of current process. Assistant Manager

KEI Industries Ltd., Bhiwandi, Rajasthan, India

(An ISO 9001:2000 Company- Manufacture of supply of electrical cables, power, control, Instrumentation, Thermocouple Extension, Winding wire for submersible motors & flexible building wires. stainless steel wire for wide range of application) July 2006 – August 2013

Evaluate and perform the testing of incoming S.S. coils for the final product by Spectrometer and by wet analysis.

Evaluate and review the quality intermediate process and inspect the final product in spool form in production shop by examination for following parameters like scratch on the intermediate wire, Die mark, color dullness, orality in cross sectional area etc.

Control on Heat treatment processes -Annealing of wires after drawing.

Develop and perform to check the concentration of the mixture acids tanks like (Sulphuric acid, Hydrochloric acid, Sodium Hydroxide and Potassium permanganate etc.) pickling section.

Evaluate the radioactive components presence, cobalt 60 at incoming stage by Rad check meter.

Test the composition of solution used in copper tinning plant OTO machine (Italy make) and update running status on daily basis.

Evaluate and perform calibration of instruments like digital temperature controllers and micrometers.

Working knowledge in ERP

Evaluate Grain size determination in materials as per ASTM E-112 & Microstructure analysis.

Perform Inclusion rating (Sulphide, Silicate, Alumina, Globular oxide) and determination its size in steel by comparison chart method.

Evaluation on failure analysis

Testing Engineer

Bhupendra Steels Pvt. Ltd., Faridabad, Haryana, India

(An ISO 9001:2000) Company, Manufacture of Ferrous & Non-Ferrous Castings, Ingots for Forgings, Rolled Products, Chemical & Mechanical testing Center) June 2004 – July 2006

Evaluate and perform the testing of Ferrous & Non-Ferrous metals (Low alloy steels, Stainless steels, Tool steel, High speed steel, Die steel, Zinc alloys, Copper alloys, Aluminum alloy) by using spectrometer (ARL-Switzerland make, LECO-U.S. make).

Evaluate and perform in-house & commercial testing of metals in chemical and mechanical area & provide customer satisfaction.

Evaluate and perform the testing of ferrous alloys in following elements like C, Si, Mn, Cr, Ni, Mo, S, P by wet/gravimetric analysis.

Study of microstructure analysis on steels and identification their phases (Hard & Tempered, Normalized structure), Cast Iron (Graphite flakes distribution of A,B,C,D Type), Nodular cast iron (nodule size, %Nodularity in per mm2 area, carbide detection if any present etc.

Documentation and participation in desktop surveillance & renewal audits held by NABL

(National Accreditation Board for Testing & Calibration Laboratories, Government of India) as a Testing Engineer

Chemist

Bhartiya Enterprises, Faridabad, Haryana, India

(An ISO: 9001:2000 Company, Heat Treatment & Testing Center) January 2002 – May 2004

Evaluate and perform Positive Material Identification (PMI) at customer site and witnessed by third party inspection agency like EIL, Lloyds, Reliance etc.

Evaluate and perform the effective case depth in carburized materials by microvicker hardness tester (Matsuzawa make) at different loads (10gf, 50gf,100gf, 200gf up to 1Kgf) and make its graphical representation to see its cutoff value

Evaluate and perform the in-house & commercial testing of metals in chemical and mechanical area & provide customer satisfaction.

Academic Qualification:

Master’s in computer science (M.Sc.)

Maharishi Dayanand University Rohtak, India

2004

Bachelor’s in science (B.Sc.)

Maharishi Dayanand University Rohtak, India

2001

Senior Secondary Education

Haryana Education Board of Bhiwani, Haryana, India 1998 First division

Higher Secondary Education

Haryana Education Board of Bhiwani, Haryana, India 1995

Skill Qualification:

Certified Internal Auditor in ISO Management System (9001:2015) by TUV Nord.

One Year Advanced Diploma in Computer Software from C.C.T. D.C.V.S, Delhi

Operating System: Windows 11, Windows 98, Windows XP Version 11,

Other: Corel Draw, page maker, Installation of software, Internet Instrument Operation and Handling:

Analytical Instrument :

Electrolytic Analyzer, Arc-Met 930 Spectrometer (Finland)

Glow Discharge Spectrometer LECO GDS500A (USA)

ARL Metal Analyzer Spectrometer (Switzerland)

Ployvac 2000 Spectrometer Hilger from U.K.

XRF Analyzer X-MET3000TX+ (Finland)

Foundry master Spectrometer (Oxford)

Niton Analyzer (Thermo scientific)

PMI Master Hitachi Portable Spectrometer

Hitachi make Spectrometer, Model: OE750

Mechanical and Metallographic instrument:

Ultimate Tensile Machine ( Capacity 10 Ton, 40 Ton, 100 Ton ), FIE make, Universal make

Universal Rockwell hardness Testing machine, SAROJ make.

Portable Hardness Tester MIC-20, Equotip GE Technologies make

Microvicker Hardness Tester (10,50,100,300,500,1000 gf) from Matsuzawa

Kocour instrument Tin coating thickness measurement in copper

Fischer's Ferrite meter

Electrolytic Etching & Polishing machine

Rad Check meter for radioactivity test

Metallurgical microscope with image analyzer (Capacity 100X to 400 X magnification)

Carl Zeiss metallurgical microscope with image analyzer (Capacity 50X to 1000X magnification)

Portable In situ metallurgical microscope (Capacity 100Xto 500X magnification) Personal Details:

Father’s Name : Late Sh. Suresh Chander

Occupation : Worked as manager in engineering firm in home Appliances (Whirlpool Corporation)

Mother’s Name & Occupation : Late Shakuntala Devi, House wife Date of Birth : 4

th

February 1980

Marital Status : Married

Children : One child age 15 yrs.

Religion : Hindu

Nationality : Indian

Current Salary : 11.0 lac CTC

Salary Expected : Negotiable

Passport Detail : P2608318 Expiry on 18.09.2026

Language : Fluent in English / Hindi

DATE :

PLACE : Faridabad ( OMPRAKASH )

Contact this candidate