YOU CHENG

Samroung Village, Krangyov Commune,

Sa Ang District, Kandal Province

H/P: 011 611 133, 098 789 710

E-mail: adymdj@r.postjobfree.com

Dear Sir / Madam

This letter is in responsible to your advertisement for a position of QA Inspector in your company. I have known this information Facebook. I am most interested to apply for this position to full fill your job requirement.

As my enclosed resume shows, I have gotten years experiences in Direct Buyer QA Inspector and in garment factory of QC and QA job to responsible for garment quality level standard, check the sample, product safety and some part of social compliance and I have experience for QA inspector for Direct Buyer Company to responsible for conducting in-line and final product inspection and providing solutions to solve quality issue, technical support and production control and sample inspection.

I would describe myself as a self-starter. I worked as an in-house QA, and QA Inspector, Assistant Merchandiser.

To work as a QA Inspector is to responsibilities include conducting in-line and final product inspection and providing solutions to solve quality issue, sample inspection, technical support and production control and make the in-line/ final inspection report, attach all photos in the in-line/ final inspection form then send to buyer head office.

To work as an in-house QA is to arrange the QA file, attend PP meeting, Attend training at the factory and buyer office, do in-line, pre-final and assist QA buyer during final audit, report and discuss finding issue with top management, work familiar with production team, follow up product safety, work closely with merchandiser, assist other jobs follow QA leader assignment.

To work as an Assistant Merchandiser is to responsibilities include collect all documents, make trim cards, and check accessories at store to divide to involving departments, check and reply email, check all samples, follow production status, loading garments into container, arrange loading report for shipping department.

I have also experienced to control both fabrics of knit and woven and I have got experienced to follow up with buyer audit the social compliance to check child labor verification, factory arrangement system, and product safety control and material. Also I have got for: Good English for: speaking writing, listening and translating equivalent to university level and also I have got computer skill for Ms. Office (Ms. Word, Excel and Internet/ E-mail).

I know many buyers such as M & S, TARGET, LEVI’S, DOCKER’S, GAP, Old Walligan, Esprit, Banana, Diesel, WEC,

H & M, NEXT, other SPORT WARE and Swim ware. All most buyers are similar requirement of quality requirement standard. I am most interested in working for your company because of your reputation for quality.

Thanks for your consideration.

Sincerely

YOU CHENG

Enclosure

CURRICULUM VITAE

Samroung Village, Krangyov Commune,

Sa Ang District, Kandal Province

H/P: 011 611 133, 098 789 710

E-mail: adymdj@r.postjobfree.com

CAREE OBJECTIVE:

Obtain challenging is seeking for the position of: Quality Inspector

WORK EXPERIENCES

January 2015 - Present : Work as QC Inspector for CAC and CTC ( Canadian Tire Corporation ) BUYER.

DUTIES AND RESPONSIBILITIES:

Attend meeting and training at office for the buyer’s requirement and policy and some information need to update for every Saturday morning at 8:00 am.

Arrange all documents before going to factory such as booking form, PO sheet, inspection form, anti-corruption letter form, traveling letter form, update email or forms, seal tape, camera, computer and contact address information to the factory.

When arrived the factory need to do as below:

Check the production status with the factory side by comparing with booking form and PO sheet for the ship quantities before inspection.

Check the packing list and PO sheet for packing method whether they pack correct or not then calculate the inspect quantity by following AQL form follow buyer requirement to inspect the carton accuracy and quality and measurement.

Select the carton and check the packing accuracy whether they pack correct ratio or not, check the solid pack and barcode sticker correct position and correct code number or not.

Check the approval sample compare with production and approval trim card and sewing construction.

Inspect workmanship by using AQL 2.5 and measurement use AQL 4.0.

Take the photos for all steps (carton stage, carton select stage, carton shipping mark and barcode and carton weight, approval sample, QA file, PO sheet, fabric weight or garment weight, garment look, defective garments before making the report).

Analyze and measure the products quality before making decision to release the shipment.

Meeting with factory team for the quality issue found during inspection for next improvement.

Make the inspection form and ask the factory side to sign the inspect report also need to sign the corruption letter form before leaving from the factory.

Seal the garments if inspection passed or fail and ask the factory send to buyer head office.

Drop the final inspection report and my office.

Conduct in-line inspection and providing solutions to solve quality issue, technical support to share some idea for production issue and production control.

Inspect the samples and pick up the sample and to buyer head office if buyer need.

Work independently and work closely with factory side and buyer side.

Work by team and cooperate each other to discuss the solution to solve the problem.

Contact to QA manager for help if any information cannot decide or cannot be solved.

Self-motivation and willing to learn new thing, work hard with high responsibility and strong mind to make decision, fast understanding person and strong confident to do things.

May 2011 – December 2014 : Work as QA for E-Garment Factory 3 years.

DUTIES AND RESPONSIBILITIES:

Attend PP meeting QA buyer, merchandiser and production team for every style, once received the QC files and PP approved samples from buyer head office.

Managing and training the QA/QCs under my control about quality requirement, team planning and assign them to work follow QA/QC flow chart.

Evaluate all the sample by following six points as below:

Fabric Evaluation (FE): to check hand feel and other washing standard such as shrinkage testing, wash blanket, bulk shade band, grinding, whiskers, hand sand, stone wash, enzyme wash and other heavy washing.

Accessories/Sundries: to check all material used such as fabric used is correct or not, thread color/text/code, button/shank/ rivet/burr/snap, leather like label (LLL), care label, hang tag, UVM/Joker tag, size sticker and poly bag.

Pattern/Artwork: to check the pattern used is correct or not, check pattern grading compare measurement spec and original pattern, check cut cross grain and the printing/embroidery placement is correct or not.

Measurement: to check the measurement following approval spec and most updated then measure the sample and mark on the point which is out of the spec and tolerance or at high end and low end of tolerance also check the printing and embroidery placement is correct or not then make comments for the correction and improvement for next step.

Construction: to check all the sewing construction by following work sheet and other information to follow all buyers’ requirement then make the comments for the unacceptable points to improvement points for next sample and bulk production.

Overall workmanship: to check the sample quality is good or not then make the comments for the point which is not good or not acceptable point to improve for next sample and bulk production.

Evaluate all type of samples such as APS, PPS/SSS, ADS, Shipment sample, Salesman sample and other test washing sample for buyer.

After evaluated finished then send the evaluation report (ER) to factory merchandiser and QA buyer to double check before sending to head office at USA.

Do first in-line (semi-garment checking all operator machine by machine)

Do Second In-line inspection (sewing construction, measurement, quality and accessories used) for all the styles, PO#, color, sizes when start bulk production especially for the first out-put and double check with Approval sample and trim card and make the report for the defect found on the garments and give the report to QA manager and inform to merchandiser and production team also other related people to correct immediately.

Do third in-line to check the pressing, folding, packing accuracy, carton marking and sundries uses (button, hook & bar, price ticket, color code, size sticker, poly bag…..).

Do pre-final inspection for every priority styles, PO#, Colors in packing process, based on AQL 2.5.

Always check with merchandiser regarding shipment schedule and priority style and prepare documents for QA buyer does final inspection.

Assist QA buyer during final inspection and inform immediately to top management after final inspection.

To be certify QA by has promoted by QA buyer and need do final inspection and release the goods by own self.

Arrange the QA file nicely by style in order.

Assist other jobs follow company assignment.

Work hard and high responsibility.

Strong confident, self-motivation, fast understanding and willing to learn new thing especially from the experience people.

2008 July– February 2010 : Work as In-house QA at Yung Wah Factory 2 years .

DUTIES AND RESPONSIBILITIES:

Attend PP meeting QA buyer, merchandiser and production team for every style, once received the QC files and PP approved samples from buyer head office.

Managing and training the QA/QCs under my control about quality requirement, team planning and assign them to work follow QA/QC flow chart.

Evaluate all the sample by following six points as below:

Fabric Evaluation (FE): to check hand feel and other washing standard such as shrinkage testing, wash blanket, bulk shade band, grinding, whiskers, hand sand, feathering, stone wash, enzyme wash and other heavy washing.

Accessories/Sundries: to check all material used such as fabric used is correct or not, thread color/text/code, button/shank/ rivet/burr/snap, leather like label (LLL), care label, hang tag, UVM/Joker tag, size sticker and poly bag.

Pattern/Artwork: to check the pattern used is correct or not, check pattern grading compare measurement spec and original pattern, check cut cross grain and the printing/embroidery placement is correct or not.

Measurement: to check the measurement following approval spec and most updated then measure the sample and mark on the point which is out of the spec and tolerance or at high end and low end of tolerance also check the printing and embroidery placement is correct or not then make comments for the correction and improvement for next step.

Construction: to check all the sewing construction by following work sheet and other information to follow all buyers’ requirement then make the comments for the unacceptable points to improvement points for next sample and bulk production.

Overall workmanship: to check the sample quality is good or not then make the comments for the point which is not good or not acceptable point to improve for next sample and bulk production.

Evaluate all type of samples such as APS, PPS/SSS, ADS, Shipment sample, Salesman sample and other test washing sample for buyer Levi’s and Gap.

After evaluated finished then send the evaluation report (ER) to factory merchandiser and Levi’s QA buyer to double check before sending to head office at USA.

Do In-line inspection (sewing construction, measurement, quality and accessories used) for all the styles, PO#, color, sizes when start bulk production especially for the first out out-put and double check with Approval sample and trim card and make the report for the defect found on the garments and give the report to QA manager and inform to merchandiser and production team also other related people to correct immediately.

Do second in-line to check the pressing, folding, packing accuracy, carton marking and sundries uses (button, hook & bar, price ticket, color code, size sticker, poly bag…..).

Do pre-final inspection for every priority styles, PO#, Colors in packing process, based on AQL 2.5.

Always check with merchandiser regarding shipment schedule and priority style and prepare documents for QA buyer does final inspection.

Assist QA buyer during final inspection and inform immediately to top management after final inspection.

To be certify QA by has promoted by QA buyer and need do final inspection and release the goods by own self.

Arrange the QA file nicely by style in order.

Assist other jobs follow company assignment.

Work hard and high responsibility.

Strong confident, self-motivation, fast understanding and willing to learn new thing especially from the experience people.

OTHER SKILLS:

Computer skill for Microsoft office (Ms. Word, Excel, Internet/E-mail).

LANGUAGES:

Khmer : Mother tongue.

English : Good for speaking, writing, listening and translating.

PERSONALINFORMATION:

Name : YOU CHENG

Nationality : Cambodian

Date of Birth : October 11, 1986

Place of Birth : Kandal Province

Marital Status : Married

Sex : Male

EDUCATION:

Complete Bachelor Degree of English at CUS University

Successfully completed at Sa Ang High School

Has successfully completed Ms. Office Word & Excel at IDR

Has successfully completed Administration and affairs at IDR ( Short Course)

CHARACTER REFERENCES:

Mr. Uy Sarang : QA at JLCAsia Tel: 078 909 017

Mr Pech Sokphouk : QA Supervisor at E-garment factory Tel: 089 667 887

Contact this candidate