CURRICULUM VITAE

Leslie Charles

**, ********** ******, ********, **********. NG16 5HY. England

Mobile: 0044 (0-793*-******

Email: adyk9w@r.postjobfree.com

PROFFESSIONAL PROFILE:

Multi-Louvre Damper, Diverter Damper and Complete Exhaust Bypass System Specialist.

A positive, proactive character who works effectively as part of a team or individually with a broad ranging Engineering background. Mechanically strong, a time served Draughtsman with substantial Project Management / Fabrication Supervision / ‘Hands on’ Installation Supervision and Commissioning Experience from within the Power Generation Industry,

Possesses excellent interpersonal, communication and negotiating skills and able to develop and maintain mutually benefitting internal and external relationships.

A conscientious and well-motivated individual.

CAREER SUMARY:

October 2022 to Present – Citech Energy Recovery Systems Limited (UK)

Technical Field Adviser (Citech Malaysia, Muhibbah Ind.

Selat Lumut, Telok Gong, Port Klang, Selangor, Malaysia).

Job Description: Supervise, advise and Monitor progress of several simultaneous HRSG manufacturing projects (Coils, ducting, stacks, Expansion Joints, Insulation and Cladding, which have hit manufacturing problems. Stainless Steel and Carbon Steel.

April 2022 to September 2022 – Siemens Energy Austria

Construction Supervisor (Plant Thermoelectrica de

Warnes, Santa Cruz, Bolivia)

Job Description: Supervise removal of old, faulty equipment in four units, install new and commission ready for handover to client. New equipment includes Diverters, Blanking Plates, Insulation, Seal Air System, I & C, Platform and Laddering.

Main Duties:

Give assistance to erection contractor in understanding and interpreting installation instructions, drawings, specifications and other provided documentation correctly for storage, handling, erection, commissioning and operation of Siemens HTT equipment.

Assist and advise during installation in a timely manner to minimize delays and to support the quality of work and to support the correctness of installation.

Attend meetings concerning matters of the products supplied by Siemens HTT

Issue Non-Conformity Reports, Site Observation Notices in case deviations between work installed and specifications and/or requirements are discovered or reported.

Monitor site activities and perform random checking of welding, installation, painting, quality and HSE issues.

Verify and witness the important and critical installation procedures, sequences and tolerances at the time of presence on site.

Communication with main office to discuss technical queries and best solution.

Prepare reports on regular basis (typically weekly or as per agreed sequence) or in case required depending from the relevance of the matter to report.

Advise, consult and assist the on start-up and commissioning activities of the supplied products.

Production of Outstanding Activity reports, track completion and to support commissioning in handover to client.

Upon completion report back to client at de-brief. How can the product be improved, oversights, improvements, defect design, client observations, installers observations…

Commission Diverter and Blanking Plate: Set up end travel of Diverter Blade. Set Actuator Limit Swtiches, Actuator Torque Setting, Set Up Seal Air System, Achieve Seal Air Pressures, Set Up Seal Air Valves, Non-Return Valves, Set Up Fail Safe, Set Up External Limit Switches, Set Up Blanking Plate Limit Switches. Run through entire Operational Cycle in collaboration with DCS.

October 2021 to March 2022 - Citech Energy Recovery Systems Limited (UK)

Technical Field Advisor (Zeppelin Systems Latin America,

Sao Paulo, Brazil - Siemens Mero 3 Project)

Job Description: Supervise construction of 4 off and 3 off Inlet Transitions, Inlet Duct and Silencers, Outlet Stack, all Internally Insulated, Painted and c/w Transportation Saddles and additional Spooling suitable for Powergen offshore installation. Duties included supervision of manufacture, ensuring product is manufactured to Citech high standards, problem solving, coordination to phased manufacturing schedule, visit sub supplier premises, inspection, punch listing, focal point between client and manufacturer, check of supplier QA documentation, detailed weekly report to Citech, deviations reporting, packing and preservation check ready for shipment.

March 2021 to May 2021 - Siemens HTT

Technical Field Advisor (Jebel Ali Power Station,

M Extension, Dubai, UAE).

Job Description: Technical Field Advisor (TFA) to supervise rectification work of distorted and leaking Blade Entry Slot for Guillotine to prevent further leakage of Turbine Exhaust to atmosphere.

Explain documentation for erection, commissioning and/or operation to erection contractor.

Instruct and Lead contractors on removal of old, damaged/distorted materials. Winching of entry framework into correct position allowing for natural post work sag, install and weld frame reinforcement using distortion control techniques. Post cooling testing with client in attendance of hinged cover to ensure effective seal with Guillotine Blade in open position against the passage of Turbine Exhaust to atmosphere.

February 2021 to March 2021 - Siemens HTT

Technical Field Advisor (Jebel Ali D Power Station, Jebel

Ali, Dubai, UAE.

Job Description: Technical Field Advisor (TFA) to oversee refurbishment of 2 no Diverter which includes Damper Shaft Replacement, Connecting Rods replacement, New Bearings, Gland re-packed, Lamella Seal Replacement and to commission in preparation for return to service.

Explain documentation for erection, commissioning and/or operation to erection contractor.

Provide assistance and guidance related to products supplied by the Customer regarding storage, handling, erection, commissioning and operation in accordance with specifications, drawings and other documentation or media provided.

Assist and advise during installation in a timely manner to minimize delays and to support the quality of work.

Attend meetings concerning matters of the products supplied by the Customer

Issue Non-Conformity Reports in case deviations between work installed and specifications and/or requirements are discovered or reported.

Provide technical assistance, problem solving and support for correction of incorrect installation or assembly.

Monitor site activities and perform random checking of welding, installation, quality and HSE issues.

Verify and witness the important and critical installation procedures, sequences and tolerances at the time of presence on site.

Supporting technical discussions.

Communication with main office in case of technical questions.

Prepare reports on regular basis (typically weekly or as per agreed sequence) or in case required depending from the relevance of the matter to report.

Advise, consult and assist the on start-up and commissioning activities of the supplied products.

August 2020 to December 2020 - Siemens HTT

Technical Field Advisor (Besmaya Electrical Power

Station Phase III, Baghdad, Iraq).

Job Description: Technical Field Advisor (TFA) to install and commission 4 no complete Exhaust Bypass Systems. To supervise the receipt, storage, handling, construction, erection, commissioning and completion of all outstanding activities for Siemens HTT supplied equipment.

Mechanical components of Bypass Systems behind the Gas Turbine Exhaust, comprising Diverter, Steel Support Structure, internally insulated Stack and Inlet Ductwork, Silencer Baffles, Hydraulic Power Unit, Seal Air System, Guillotine Damper, Expansion Joints and Platform and Laddering.

Main duties:

Give assistance to erection contractor in understanding and interpreting installation instructions, drawings, specifications and other provided documentation correctly for storage, handling, erection, commissioning and operation of Siemens HTT equipment.

Assist and advise during installation in a timely manner to minimize delays and to support the quality of work and to support the correctness of installation.

Attend meetings concerning matters of the products supplied by Siemens HTT

Issue Non-Conformity Reports, Site Observation Notices in case deviations between work installed and specifications and/or requirements are discovered or reported.

Monitor site activities and perform random checking of welding, installation, painting, quality and HSE issues.

Verify and witness the important and critical installation procedures, sequences and tolerances at the time of presence on site.

Communication with main office to discuss technical queries and best solution.

Prepare reports on regular basis (typically weekly or as per agreed sequence) or in case required depending from the relevance of the matter to report.

Advise, consult and assist the on start-up and commissioning activities of the supplied products.

Production of Outstanding Activity reports, track completion and to support commissioning in handover to client.

Upon completion report back to client at de-brief. How can the product be improved, oversights, improvements, defect design, client observations, installers observations…

Set up end travel of Diverter Blade. Set Actuator Limit Swtiches, Actuator Torque Setting, Set Up Seal Air System, Achieve Seal Air Pressures, Set Up Seal Air Valves, Non-Return Valves, Set Up Fail Safe, Set Up External Limit Switches, Set Up Blanking Plate Limit Switches. Run through entire Operational Cycle in collaboration with DCS.

March 2020 to June 2020 - Siemens HTT,

Technical Field Advisor (Parnaiba V Power Plant

Bottoming Cycle, Brazil)

Job Description: Technical Field Advisor (TFA) for Diverter and Blanking Plate construction and cold commissioning. Conversion of Power plant from Simple Cycle to Combined Cycle. (4 Units).

To supervise the receipt, storage, handling, construction, erection, commissioning and completion of all outstanding activities for Siemens HTT supplied equipment such as Mechanical components of Bypass Systems behind the Gas Turbine Exhaust, comprising Diverter, Steel Support Structure, internally insulated Stack and Ductwork, Silencer Baffles, Hydraulic Power Unit, Seal Air System, Guillotine Damper and Expansion Joints.

Main duties:

Give assistance to erection contractor in understanding and interpreting installation instructions, drawings, specifications and other provided documentation correctly for storage, handling, erection, commissioning and operation of Siemens HTT equipment.

Assist and advise during installation in a timely manner to minimize delays and to support the quality of work and to support the correctness of installation.

Attend meetings concerning matters of the products supplied by Siemens HTT

Issue Non-Conformity Reports, Site Observation Notices in case deviations between work installed and specifications and/or requirements are discovered or reported.

Monitor site activities and perform random checking of welding, installation, painting, quality and HSE issues.

Verify and witness the important and critical installation procedures, sequences and tolerances at the time of presence on site.

Communication with main office to discuss technical queries and best solution.

Prepare reports on regular basis (typically weekly or as per agreed sequence) or in case required depending from the relevance of the matter to report.

Advise, consult and assist the on start-up and commissioning activities of the supplied products.

Production of Outstanding Activity reports, track completion and to support commissioning in handover to client.

Upon completion report back to client at de-brief. How can the product be improved, oversights, improvements, defect design, client observations, installers observations…

Set up end travel of Diverter Blade. Set Actuator Limit Swtiches, Actuator Torque Setting, Set Up Seal Air System, Achieve Seal Air Pressures, Set Up Seal Air Valves, Non-Return Valves, Set Up Fail Safe, Set Up External Limit Switches, Set Up Blanking Plate Limit Switches. Run through entire Operational Cycle in collaboration with DCS.

October 2019 to December 2019 - Siemens HTT

Technical Field Advisor (Besmaya Power Plant, Phase II,

Baghdad, Iraq)

Job Description: Hot Commissioning of installed Exhaust Bypass System. (4 Units).

Set up/fine tune Limit Switches, Position feedback, Seal Air Valves, Non Return Valves, Seal Air Pressure setting, Blanking Plate limit Switches, Hinged Cover Limit Switches, Blanking Plate full Operational Cycle, Diverter Operation…. In cooperation with DCS. Check for faults throughout, repair, replace, punch list, prepare and submit full technical report to client for discussion/further actions. Leave as fully functional/operational unit.

June 2019 to November 2019 - Siemens Argentina

Technical Field Advisor (San Pedro Bottoming Cycle,

San Pedro, Argentina)

Job description: Technical Field Advisor (TFA) for Diverter and full Exhaust Bypass System construction and cold commissioning. Conversion of Power plant from Simple Cycle to Combined Cycle. (2 Units) and installation of new, 3rd Unit complete.

To supervise the receipt, storage, handling, construction, erection, commissioning and completion of all outstanding activities for Siemens HTT supplied equipment such as Mechanical components of Bypass Systems behind the Gas Turbine Exhaust, comprising Diverter, Steel Support Structure, internally insulated Stack and Ductwork, Silencer Baffles, Hydraulic Power Unit, Seal Air System, Guillotine Damper and Expansion Joints.

Main duties:

Give assistance to erection contractor in understanding and interpreting installation instructions, drawings, specifications and other provided documentation correctly for storage, handling, erection, commissioning and operation of Siemens HTT equipment.

Assist and advise during installation in a timely manner to minimize delays and to support the quality of work and to support the correctness of installation.

Attend meetings concerning matters of the products supplied by Siemens HTT

Issue Non-Conformity Reports, Site Observation Notices in case deviations between work installed and specifications and/or requirements are discovered or reported.

Monitor site activities and perform random checking of welding, installation, painting, quality and HSE issues.

Verify and witness the important and critical installation procedures, sequences and tolerances at the time of presence on site.

Communication with main office to discuss technical queries and best solution.

Prepare reports on regular basis (typically weekly or as per agreed sequence) or in case required depending from the relevance of the matter to report.

Advise, consult and assist the on start-up and commissioning activities of the supplied products.

Production of Outstanding Activity reports, track completion and to support commissioning in handover to client.

Upon completion report back to client at de-brief. How can the product be improved, oversights, improvements, defect design, client observations, installers observations…

Set up end travel of Diverter Blade. Set Actuator Limit Swtiches, Actuator Torque Setting, Set Up Seal Air System, Achieve Seal Air Pressures, Set Up Seal Air Valves, Non Return Valves, Set Up Fail Safe, Set Up External Limit Switches, Set Up Blanking Plate Limit Switches. Run through entire Operational Cycle in collaboration with DCS.

January 2019 to June 2019 - Citech Energy Recovery System (UK) Ltd for AKER Solutions

Manufacturing Supervisor (2 no Cibas 60 WHRU’s for

Maersk Inspirer Upgrade.

Key Function: Based at the manufacturing facility and regularly visit other sub suppliers. Focal point between the Project Manager of Citech and Manufacturers. Responsible for the coordination and day to day execution of all Quality Control functions. To assist with all manufacturing issues, drawing clarification, resolve design errors and create Production schedules, issue Notification of Inspections. Ensure compliance with contract, applicable standards, ITP and Engineering Drawings. Host client visits during manufacture surveillance and stage inspections and Factory Acceptance Test, supervise final build for FAT.

July 2018 to December 2018 - Siemens Kuwait

Technical Field Advisor (Subiya Stage 3 CCPP, Power Station and Distillation Plant, Kuwait.

Job description: Technical Field Advisor (TFA) for Diverter and full Exhaust Bypass System construction.

To supervise the receipt, storage, handling, construction, erection, commissioning and completion of all outstanding activities for NEM Power Systems (Siemens) supplied equipment such as Mechanical components of Bypass Systems behind the Gas Turbine Exhaust, comprising Diverter, Steel Support Structure, internally insulated Stack and Ductwork, Silencer Baffles, Hydraulic Power Unit, Seal Air System, Guillotine Damper and Expansion Joints.

Main duties:

Give assistance to erection contractor in understanding and interpreting installation instructions, drawings, specifications and other provided documentation correctly for storage, handling, erection, commissioning and operation of NEM Power Systems equipment.

Assist and advise during installation in a timely manner to minimize delays and to support the quality of work and to support the correctness of installation.

Attend meetings concerning matters of the products supplied by NEM Power-Systems

Issue Non-Conformity Reports, Site Observation Notices in case deviations between work installed and specifications and/or requirements are discovered or reported.

Monitor site activities and perform random checking of welding, installation, painting, quality and HSE issues.

Verify and witness the important and critical installation procedures, sequences and tolerances at the time of presence on site.

Communication with main office to discuss technical queries and best solution.

Prepare reports on regular basis (typically weekly or as per agreed sequence) or in case required depending from the relevance of the matter to report.

Advise, consult and assist the on start-up and commissioning activities of the supplied product’s.

Production of Outstanding Activity reports, track completion and to support commissioning in handover to client.

Upon completion report back to client at de-brief. How can the product be improved, oversights, improvements, defect design, client observations, installers observations…

May 2016 to February 2018 - Siemens Heat Transfer Technology BV

Lead Technical Field Advisor (New Capital Mega Project,

Egypt)

Job Description and Main Duties as above but 8 complete Exhaust Bypass Systems. Ie. Ducting, Stack, Diverter Dampers, Guillotine Dampers, Silencers, Steel Support Structure, Expansion Joints and Hydraulic Power Unit.

Sept 2013 – May 2016 Process Group International, Abu Dhabi, UAE.

Construction Manager

Position Description

The Construction Manager oversees the manufacture and assembly phase of the company's Oil and Gas processing packages.

Purpose of Role (Objectives)

To ensure efficient, correct and safe manufacture and assembly of process packages in the workshop

To ensure correct site installation and assembly of process packages.

KEY RESPONSIBILITIES & ACCOUNTABILITIES

Assembly Supervision:

Liaise with sub contract management (Manufacture) to monitor assembly production schedules & manning levels.

Liaise with sub contract management to ensure adequate equipment is available for production and assembly & work towards continuous improvement of working practices.

Schedule and chair monthly PGI / Sub Contractor meetings for continuous improvement of quality and safety related issues. Produce Agenda.

Act as the communication interface between Sub Contractor and PGI from commencement of assembly to despatch of completed skids and interconnecting pipework.

Ensure correct issue of drawings are being used / retrieval of superseded drawings.

Supervise labour on sub-contractor shop floor during assembly ensuring timely and safe completion to required standards.

Supervise the assembly of pressure vessel internals Ie. Sieves, Weirs, Coalescers, Electrostatic Coalescers, Hydro Cyclones, Electrostatic Transformer installation etc…

Expedite bought out items in conjunction with relevant Project Engineer, ensuring both PGI and sub-contractors are fully informed of all delays / errors.

Ensure equipment and components are readily available for a smooth, efficient assembly process.

Carry out inspection of fabricated items at sub-contractors, ensuring compliance with PGI requirements.

Inspect components prior to assembly, ensuring correct supply and quality of manufacture.

Expedite fabrication activities at sub-contractors.

Review QA documentation and ensure compliance with PGI ITP’s/Quality plans.

Supervise preparation of equipment for despatch (i.e. packing, blanking, preservations, safe loading, lashing, etc.); assist with preparation of packing lists.

Ensure lifting arrangements for load-out/assembly with Sub contractor are agreed in advance in accordance with current lifting procedure.

Prepare Lifting plans for loading management and H & S approval.

Compile assembly & installation instructions.

Site:

Represent PGI onsite interests.

Liaise with Client site management.

Complete daily reports in line with PGI Project Managers' requirements.

Agree manpower levels, tooling / equipment / cranage requirements and production / progress schedules.

Supervise the delivery and offloading, storage, unpacking, load lifting onto site/platform and into installation position of all PGI equipment.

Record and inform PGI Project Manager of all damages.

Observe and report on the repair work of transit/installation damages.

Supervise the installation of PGI equipment ensuring correct installation in accordance with PGI or supplier installation instructions.

Have site fully prepared for the arrival of PGI Commissioning Engineer and assist with all commissioning activities.

Office:

When required, perform duties listed in Project Engineer Job Description

2008 – 2013 Les Charles Limited

Free Lance Engineer

Power Generation:

Manufacturing supervision, packaging, delivery, Installation supervision and commissioning support of large-scale Exhaust Bypass Systems, Support Steelwork, Expansion Joints, Boiler/Heat Exchangers, Damper Units/Diverters/Multi-Louvres, Seal Air Systems, Guillotine Dampers. Liaison with factory manager, production planning, expediting of bought out items, lift planning, correctness of manufacture and assembly, Factory acceptance test, setting up of dampers to seal and operate and to operate usually with fail safe system to client approved ITP. At all times, Health and Safety compliant, organisation of manning levels, toolbox talks etc.

Report back to company on progress, problems, documentation etc.… to client.

Commissioning. Adjust dampers to achieve required seal efficiency via mechanical linkages and actuation systems. Demonstrate seal efficiency, Emergency Shut Down System and open closed indicators to client and in conjunction with control room.

Annual surveying and submission of full technical report for entire WHRU’s, usually offshore. Supervise refurbishment/maintenance work.

Supply and fitting of spares, refurbishment and/upgrade of WHRU’s.

2004 – 2008 Power Damper Services Ltd Product: Multi-Louvre Dampers/Exhaust

Bypass Systems

Commissioning/Site Engineer

2001 – 2004 Power Damper Systems Ltd Product: Multi Louvre and Butterfly Damper

Units

Project Engineer/Site Engineer

1997 - 2001 NEM Power Systems Ltd Product: Complete Exhaust Bypass Systems

Including Multi-Louvre and Butterfly

Project Engineer/Commissioning Eng. Dampers Units

1990 – 1997 Stainton Metal Company Ltd Product: Electrical Transmission Poles

Export Sales Manager Distribution Structures, High Masts,

Lighting Columns, Street Furniture.

1982 – 1990 Becorit & Herweg Limited Product: Damper Units, Diverters, Guillotine

Design Draughtsman. Guillotine Dampers, Multi louvre Dampers

1975 – 1982 Whiteley Read Engineers Limited Product: Pressure Vessels. Trainee Draughtsman

Education and Qualifications

High Pavement Grammar School:

4 GCSE O levels Maths, English Language, Woodwork and Technical Drawing.

People’s College of Further Education (1975 to 1980):

Full Technological Certificate, comprising of:-

Technological Certificate Part 1 Fabrication & Welding bias. (2 years)

Technological Certificate Part 2 Fabrication & Welding bias. (2 years)

Technological Certificate Part 3 & 4 Fabrication & Welding Bias (1 year)

Stockton & Billingham College of Further Education (1994 – 1996) :

Technician Certificate Part 1 Mechanical and Production Engineering. (2 Years)

Derby University (1988 – 1990):

Certificate of the Institute of Industrial Managers.

Diploma of the Institute of Industrial Managers.

Professional Development

•Trained Draughtsman

•Experienced Project Engineer

•Experienced Construction/Installation Supervisor.

•Experienced Site/Commissioning Engineer

•Experienced Fabrication supervisor

•Offshore Experienced

•Commercial knowledge/Negotiation Skills

•Familiar with Permit to Work system both onshore and offshore.

•FOET – Further offshore Emergency Training – OPITO Approved.

•Trained First Aider.

Professional Achievements:

Installation Supervision and Commissioning of 4 off complete Exhaust Bypass Systems at Besmaya Electrical Power Station Phase III, Baghdad, Iraq on Behalf of Siemens HTT. Owner: Mass Energy Group Holding Ltd.

Construction Supervision and cold commissioning of 4 off Diverters and Blanking plates and conversion of plant from SCPP to CCPP. Pernaiba Power Plant, Brazil. Client: Siemens Energy BV, Deutchland.

Hot Commissioning of 3 Units, Diverter and Blanking plate Besmaya Power Plant, Baghdad. Client: Siemens

Construction Supervision, installation and cold commissioning of 1 off Diverter and Blanking plate for CCPP and conversion of 2 off from SCPP to CCPP Diverter and Blanking plates San Pedro Bottoming Cycle. Client: Siemens SA, Buenos Aries.

Construction Supervision and Installation of 2 off – Exhaust Bypass Systems on Sabiya (Kuwait) CCPP and Distillation Plant. Client: State of Kuwait Ministry/Siemens Heat Transfer Technology BV.

Supervision of Construction and Installation of 8 off - Exhaust Bypass Systems on New Capital (Cairo, Egypt) 4800 Mega Watt Combined Cycle Power Plant Project for Siemens. Client: Ministry of Electricity and Energy Egyptian Electric Holding Company/Siemens Heat Transfer Technology BV.

•Supervision and Commissioning of Fuel Gas De-Sulphurisation plant at Ratcliffe On Soar Power Station including large scale Multi-Louvre Dampers and Guillotine Units and Ductwork. Client: John Brown Engineering Limited.

•Training given during training presentation to operative staff on WHRU and Multi-Louvre Dampers for Start up and Operation & Maintenance activities in Algeria. Client: Groupment Bir Seba (Boustead Industrial Heaters)

•Installation and Commissioning of Large Multi-Louvre Dampers for Killingholme A and B Dampers Power Station. Client: Babcock Power.

•Installation Supervision of Skid Mounted Processing Units for South Annajma Early Production Facilities, Sudan. Client: Star Oil.

•Installation Supervision of Jalal Gas Dehydration & TEG Regeneration Package, Oman. Client: Oil & Natural Gas Corporation Limited, India.

•Manufacture Supervision in Thailand Workshop (Vipco) of full Waste Heat Recovery System – 4 Units for Citech Energy Recovery Systems, including Multi-Louvre Dampers Client: GE Oregen.

•Manufacture Supervision in Malaysia (Tepat Teknik) of full Waste Heat Recovery System and Multi-Louvre Dampers for Citech Energy Recovery Systems. Installation and Commissioning of same on Egypt Site. Client: Egyptian LNG/Worley Parsons Engineers Egypt Ltd.

•Supervision of Modifications to Produced Water Treatment Package on Heera Platform, India. Client: Oil & Natural Gas Corporation Limited.

•Annual offshore North Sea to carry out survey and supervision of subsequent maintenance/refurb work of Waste Heat Recovery Systems and Multi-Louvre Dampers on Platforms such as Captain, Britannia, Maersk,… Client: Conoco, NEM Power Systems, Siemens..

•Refurbishment of Diverter Dampers on Captain Platform, North Sea, replacement of Diverter Bearings, Gland Packing, Blade Flexible Seals and Full Functional test prior to release to go back into service Client: Conoco, Power Damper Services.

IT Skills:

Word, Excel, Access, Internet & Email and AutoCAD.

Personal Details:

Driving License Full and clean

Health Good, non-smoker, regular exercise.

Interests Family activities, Keep Fit, Football, Cricket, Rugby, Current Affairs.

Referees:

Mr. Raymond Mulligan Mr.Tony Rayns Mr. Stephen Carlisle

OIC Project Manager Company Owner Construction Manager

REI Process Pty Limited Power Damper Services Ltd Siemens Heat Transfer

Mobile: +44 (0-744*-***-*** Mobile: +44 (0-786*-***-*** Mobile: +44-792*-***-***

Contact this candidate