PALAYAM.N. MOHAMMED UZAIR

Chennai, Tamil Nadu +918********* adybyr@r.postjobfree.com https://skill-lync.com/profiles/mohammed-uzair-z0w9h CAREER OBJECTIVE:

Aspiring Design Engineer expertise include design software like CATIA V5, NX-CAD and CREO. With knowledge of GD&T and ISO standards, I have developed the automotive 3-D design and modellings. Have used DFMEA, FMEA, and DFM failure mode analysis ideas and various automotive production techniques. I'm currently looking for a position in mechanical engineering where I can put my wealth of knowledge to work to support your company's pursuit of greatness in the field. EXPERIENCE:

Junior Design Engineer at Design Tech System Pvt ltd, Chennai. (Oct – Dec 2022)

• Based on the requirements, prepared 3D models&manufacturing drawings with the consideration of GD&T and ISO standards

• Proficient in Engineering Drawings.

Trainee at TVS-Brakes India Pvt ltd, Vellore. (Nov – Dec 2020)

• Operates a press brake to manufacture tools, equipment, and other components from sheet metal or metal plates.

• Prepares, sets up, and adjusts press brake as required by product plans and production schedules.

• Ensures that there are sufficient raw materials available.

• Measures and aligns materials to be used.

• Inspects products, evaluating finished pieces for compliance with quality standards and specifications.

• Performs routine maintenance on the press brake.

• Maintains a clean work area.

• Performs other related duties as assigned.

Experience in Royal Enfield Dealership:

• Handle customer complaints, provide appropriate solutions and alternatives within the time limits; follow up to ensure resolution.

• Keep records of customer interactions, process customer accounts and file documents. Follow communication procedures, guidelines and policies. Take the extra mile to engage customers. SOFTWARE & TECHNICAL SKILLS:

• CAD: CATIA V5, PTC CREO/PRO-E, AUTOCAD

• MS-WORD (Non-Technical Skill)

• Knowledge in DFMEA, DFM, FMEA, DFMA

PROJECTS

AUTOMOTIVE PLASTIC DESIGN - CATIA

Coin holder design:

• The CAD part is fully modified and made it as a perfect class A surface.

• The resulted surface is undergone by bisecting method to find the tooling axis for manufacturing process

• With the tooling axis, the draft analysis is done to check the feasibility of manufacturing of the part with the class a surface with all necessity conditions is cleared do the class b surface, c surface, and make as the closed part body Switch bezel design:

• The CAD component was created to be a perfect class A surface. The final class A surface is also constructed using the moment of inertia method to identify the class A midpoint and the tooling axis.

• I used the sweep command to create the B and C surfaces, then checked and assured that there were no boundaries inside the surface before solidifying the body with the closed body command in CATIA. Car bumper design:

• The irregular class A surface was corrected into a perfect class A and fixed a point normal to the surface.

• By using line command, the tooling axis for manufacturing process was created. Then the draft analysis is done to check the feasibility of manufacturing of the part

• The body was closed with the perfect trim of class B and C surface with correct draft angle of industry standards. AUTOMOTIVE SHEETMETAL DESIGN - CATIA

Design and develop Hood and its respective components

• Design Hood outer panel, inner panel, necessary reinforcements from the Master section, and design parameters.

• Taken consideration of passenger safety and pedestrian safety measures at the time of Crash.

• Assembly of Hood inner panel, outer panel, latch, hinge, and reinforcements. Design of Car Roof:

• Designed the Sunroof with Front & Rear Roof Rail, Bow Roof, Centre Bow Roof & Reinforcement.

• By Following Heat Distortion and Snow Load Prediction Criteria Based on the OEM Standard.

• Also, the Roof has been subjected to Draft Analysis to Check the Manufacturability. Design of Car Backdoor:

• Designed the Inner Panel with Embosses, Outer Panel, Hinge & Gas Stay Reinforcement, Wiper Mounting, Latch &Striker is created by following the trajectory which Based on the OEM Standard. Also, the Model has been Subjected to draft analysis to check the manufacturability.

Geometric Dimensioning & Tolerancing:

• Done and analyzed the all-tolerance shape and basic stack-up analysis of a part

• Analyzed the virtual size and worst-case boundary. Bio-Mechanical Analysis of a Manufacturing Plant - Academic Projects:

• The main objective is to reduce the internal pressure and work force and to increase the output by some biological analysis. The main software which we use to analyze is owako working analysis system (OWAS), and performance table.

• By adjusting the angle of performance, there will be deviation in the pressure in joints. Due to this, there will be less pressure in that joint. Through working in this action, we have calculated the time. EDUCATION:

• Masters in Hybrid E-Vehicle Design and analysis SKILL LYNC, 85%.

• B.E. Mechanical Engineering in Sivanthi Aditanar college of Engineering, CGPA-6.8/10. 2020

• 12th-Kamalavathi Higher Secondary School, Tuticorin, 73%. 2016

• 10th Kamalavathi Higher Secondary School (CBSE) Tuticorin, 74%. 2014 AREA OF INTEREST:

• 3-D Modelling

• Automotive Design

Contact this candidate