PRAVEEN KUMAR
Total Work Experience: (**.* Years)
( Piping & Blasting/Painting )
B’GAS Level- 2 (Painting Inspector)
Diploma in Mechanical Engineering
Mob: +917********* /+918*********
ady9vf@r.postjobfree.com
ady9vf@r.postjobfree.com
OBJECTIVE
Seeking a challenging carrier in Project construction management to learn the critical aspect thereby organization contributing positively towards the realistic growth of the organization & self.
Strengths: (i) Having good communication skill, grasp on analytical ability, leadership
Quality & willingness to face challenges
(ii) Familiar with ASME Code – II, Sec-V & Section – IX
Training:
1. Time management & Electrical maintenance system training organized by IOTIESL.
2. TQMS (Tnishqa Quintessence management Services) organized by IOTIESL.
Computer Literacy:
Having working knowledge of MS office
Having working knowledge of operating System (MS – DOS, MS-Windows-98, 2000, XP, Window 7 & Linux).
EDUCATIONAL QUALIFICATION
B’GAS Level- 2 (painting Inspector) –( BG 657479)
Diploma in Mechanical Engineering
Graduation,{Geog. (Hons)}
Computer hardware & networking from Jetking, New Delhi.
Language : English & Hindi
WORK EXPERIENCE
WORKING WITH PUNJ LLOYD LIMITED FOR APSEZ PROJECT FORMERLY ADANI PORT LIMITED MUNDRA,KUTCH,GUJARAT, INDIA
Duration : 23 Jan.2017 To 27 Nov.2020
Company : Punj Lloyd Limited
Position : Senior Engineer (Piping & Painting)
Client : ADANI PORT LTD.(APSEZ)
Location : APSEZ PROJECT, MUNDRA, GUJARAT
Project Work Summary:
The major work erection & commissioning Project & U/G, A/G pipeline works in APSEZ Project Mundra, Gujarat site includes civil & mechanical works for construction. Wherein I was involved as a Senior Engineer painting and piping.
Responsibility:
Doing all documentation along with inspection of pre-fab & production shop.
Supervision of all inspection activity.
Identification Traceability.
Transporting to blasting / painting shop.
Doing all execution and documentation.
Responsible for painting/coating work and inspection of surface preparation of steel and follow up all relevant painting stages.
WORKING WITH PUNJ LLOYD OIL & GAS (MALAYSIA) SDN. BHD. FOR RAPID ( Refinery & Petrochemical Integrated development ) TANK FARM PROJECT, MALAYSIA.
Duration : 9th February 2016 To Jan.2017
Company : Punj Lloyd Oil & Gas (Malaysia) Sdn. Bhd.
Position : QC Engineer (Painting Inspector)
Client : PETRONAS.
Location : MMHE & RAPID PENGERANG, MALAYSIA.
Project Work Summary:
The major TANK FARM Project & U/G, A/G pipeline works in RAPID Project Pengerang site includes civil & mechanical works for construction. Wherein I was involved as a Qc painting inspector.
Responsibility:
Doing all execution and documentation planning.
Doing all documentation along with inspection of pre-fab & production shop.
Supervision of all inspection activity.
Identification Traceability.
Transporting to blasting / painting shop.
Responsible for painting/coating work and inspection of surface preparation of steel and follow up all relevant painting stages.
WORKING WITH SIMPLEX INFRASTRUCTURE LTD FOR RELIANCE INDUSTRIES LTD J3 PROJECT ( DTA-PCG GASOLINE UPGRADATION PROJECT JAMNAGAR )
Duration : 8th July 2014 To 13 Jan 2016
Company : Simplex Infrastructure Ltd
Position : QC Painting Inspector
Client : Reliance Industries Ltd (RIL)
Location : Reliance j3 Project, Jamnagar,Gujarat
Project Work Summary:
The major U/G & A/G pipeline works of Banging Recovery Unit (BRU) in ISBL (In Side Battery Limit) includes civil & mechanical works for construction of Gasoline Up-gradation Project. Wherein I was involved as a Qc painting inspector and planning also.
Responsibility:
Planning &Inspection for Blasting & Painting/Coating.
Scheduling, Monitoring, cost controlling, preparing master programe, resource planning, project
invoice claiming etc.
Weekly updating the approved baseline program as per actuals on site.
Responsible for painting/coating work and inspection of surface preparation of steel and follow up all relevant painting stages.
Surface preparation, Surface roughness, Blasting grade, Surface defect, blasting abrasive.
Weathering conditions, Steel temperature, WFT, DFT, Holiday, paint defect.
Check calibration certificate for all painting inspection equipment.
Painting & Blasting Operator qualification test.
Check the repair & touch up and marking the defect.
Check the surface preparation and wrapping application for all underground pipeline (Hot & Cold wrapping).
QA/QC documentation.
WORKING WITH INDIAN OILTANKING LTD FOR CAIRN ENERGY – MANGLA DEVELOPMENT PIPELINE PROJECT (MDPP).
Duration : 3rd Jan. 2012 to June 2014
Company : IOT Infrastructure & Energy services Ltd.
Position : Engineer ( Piping & Painting Inspection )
Client : Cairn Energy India Ltd
Location : MDPP Bhogat, Jamnagar,Gujarat
Project Work Summary:
The project involves fabrication, erection, testing & commissioning of the 6,00,000 Inch-Meter &
4,00,000 Inch-dia piping work.
Responsibility:
Inspection for Blasting & Painting application.
Surface preparation, Surface roughness, Blasting grade, Salt contamination measurement, Surface defect, blasting abrasive.
Weathering conditions, Steel temperature, WFT, DFT, Adhesion, Drying, Holiday, paint defect, Painting tools, Thinning, Application Technique.
Check calibration certificate for all painting inspection equipment.
Painting & Blasting Operator qualification test.
Responsible for painting work and inspection of surface preparation of steel and follow up all relevant painting stages.
Check the repair & touch up and marking the defect.
Check the surface preparation and wrapping application for all underground pipeline (Hot & Cold wrapping)
Check after lining application from pinhole by holiday test.
Monitor Rock wool (Thermal insulation), Cladding as per specification.
QA/QC documentation.
Make final Painting, Cladding inspection reports.
The major pipeline works of Mangala Development Pipeline Project includes civil & mechanical works for construction of crude oil stores tanks. Wherein I was involved for mechanical Piping work in PL, FW, CHW, Steam Line, NAD System, DMW & GI piping for IA, SA & Mask Air. While I was used IS-2062, SA-106 Gr-B, SA-312 TP 304 & SA-312 TP 304L material.
WORKED WITH INDIAN OIL TANKING LTD FOR CAIRN ENERGY – OIL EXPLORATION, BHAGYAM FIELD DEVELOPMENT PROJECT.
Duration : 3rd Jan. 2011 to Dec. 2012
Company : IOT Infrastructure & Energy services Ltd
Position : Engineer (Piping) With
QC (Painting Inspection) Supervision.
Client : Cairn Energy India Ltd
Location : Barmer- Rajasthan
Project Work Summary:
The Major Civil works of Bhagyam Development field includes civil & Mechanical works for
construction of Crude oil well pads wherein I was involved for execution of mechanical work from
Jan.11 to Dec.12.
Responsibility:
Inspection for Blasting & Painting application.
Surface preparation, Surface roughness, Blasting grade, Salt contamination measurement, Surface defect blasting abrasive.
Weathering conditions, Steel temperature, WFT, DFT, Adhesion, Drying, Holiday, paint defect, Painting tools, Thinning, Application Technique.
Check calibration certificate for all painting inspection equipment.
Painting & Blasting Operator qualification test.
Responsible for painting work and inspection of surface preparation of steel and follow up all relevant painting stages.
Check the repair & touch up and marking the defect.
Check the surface preparation and wrapping application for all underground pipeline (Hot & Cold wrapping)
Check after lining application from pinhole by holiday test.
Monitor Rock wool (Thermal insulation), Cladding as per specification.
QA/QC documentation.
Make final Painting, Cladding inspection reports.
I was responsible to look after the execution of work at fabrication yard & delivering the finish products to erection crew in advance.
WORKED WITH M/S VIJAY TANK & VESSELS (VTV) FOR INDIAN OIL CORPORATION LTD. PANIPAT
Duration : Jan. 2010 TO Dec. 2010
Client : IOCL - PANIPAT
Designation : Supervisor (Mech.)
Location : PANIPAT
Project Name : Naptha Cracker Project, Panipat.
Project Work Summary: The project involved
Fabrication & erection of Vessel Nozzle (2” to 72”)
Fabrication of Baffle Tray.
Fabrication & erection support ( Internal & External)
Responsibility:
I have been assigned to look Fabrication & welding completion of the site fabricated items at site (fabrication yard).
Supervision of manpower & reporting to the Section-Head
Preparation of MTO (Material Take Off)
Preparation of inspection reports & getting signed by Consultant/ Client.
Language Known: Hindi & English
Personal Details:
Father’s Name : Shri Ashok Kumar Singh
Date of Birth : 4th February 1983
Marital Status : Married
Nationality : Indian
Permanent Address: Vill – Nathopur, P.O. - Nasej,
P.S.:- Kudra, Dist.: Kaimur, (Bhabhua)
Bihar, Pin- 821108
Mobile: +91-725*******, 834*******
E-mail: ady9vf@r.postjobfree.com
ady9vf@r.postjobfree.com
Present salary :-
Expected Salary :-
Passport NO. : L9195334
I hereby declare that all the information given above is true to the best of my knowledge.
Place : kudra, Bihar Date :14 / 07 / 2023 (Praveen Kumar)