Page * of *

CURRICULUM VITAE

PERSONAL INFORMATION

Name : Arya Surya Perdana

Place Of Birth : Jombang

Date Of Birth : 05 May 1983

Religion : Moslem

Marital Status : Married

Address : Bambu Kuning Blok B3/22

Email : ady81i@r.postjobfree.com

Phone : +62-953**-******

PERSONAL SUMMARY

A profoundly hard working and career driven professional, with over ten year experiences working in the oil and gas construction sector. An extremely focused and strategic planning with a fully comprehensive understanding of all construction competencies, as well as planning, budgeting and site supervisory duties. Excellent interpersonal skills and a highly competent attitude to adapting to change have led to an extremely determined manager with a flexible and confident approach. Also Arya’s have experiences in Building services like Temporary/Remote Platform Installation, Protection Pile Installation, Living Quarter Helideck Reinforcement, Overhead and Crane Installation, Platform Stairway Modification, Monorail beam strength improvement, Sea Fastening and Boat Landing Installation, V-Shape Surfer boat landing installation, Platform’s Riser Protection Installation, Living Quarter Loading Deck/Area Enlargement, Instrument Air System Improvement

(Air Scrubber Installation), Water cut and flow meter installation, Oil Metering System Revamping, Rerouting Drain line at flaring system, Fuel Gas System venting modification and pipelines. Course Attended / Professional Training

● WI (CSWIP 3.0) : The Welding Institute UK

● Fire Fighter : Mc Connell Dowell Batam Island

● Supervisory and Leadership : Mc Connell Dowell Batam Island

● Flange Management : Jakarta, Indonesia

● Piping Engineering : Batam Island

● Working at Height Level : Batam Island

● Internal Auditor Training : Batam Island

● Basic First Aid : Batam Island

● HSE Management System : Batam Island

● HIRAC Certification : Batam Island

● Safe Work Practice : Batam Island

● ASNT Lev II for MT, PT, UT, RT : Batam Island

● Ahli Madya Mekanikal NRTA 1110191 : Batam Island Page 2 of 8

SUMMARY OF CAPABILITIES AND QUALIFICATION

● Knowledge and Experience

Management

System improvement

Supervisory

Diesel and Combustion Engines

Construction

Planning & Project Control

Quality control and Inspection

Non Destruction Test and Destruction Test

Technical Calculation for Materials Steel Structures.

● Able to use PMI equipment ( Thermo Scientific )

● Competent computer skills in Microsoft Office products including Word, Excel and Power Point, Internet Application, AutoCAD, SketchUP and Technical Drawing etc.

● Able to operate CMM (Coordinate Measuring Machine), Smartscope, X-ray Machine.

● Assembly and Erection, welding and consumables, welding symbols, piping and structure drawing, Welding Procedure, Welding Processes.

● Well knowledgeable in metal test such as Destructive Test: Hardness Test, Macro Test, Fracture Test, Nick Break Test, Carphy Test and Bend Test of weld area, HAZ area and material test.

● Identification of material and weld ability, material traceability, condition and dimensions.

● Familiar with Non Destructive Test such as Radiography Test, Magnetic Particle Test, Dye Penetrated Test, Ultrasonic test, Eddy Current Test,

● Familiar with code and standard i.e. AWS D1.1, ASME IX,, API 5L, AWS/API Structural codes/Recommended Practices and ASNT/API NEW Personnel Qualification Requirements

● Documentation skills of Structure, Piping, Tank, Pipeline Inspection,

● Having knowledge of Heat Treatment on metal. Quenching, Annealing, PWHT ( Post Weld Heat Treatment )

Page 3 of 8

WORKING EXPERIENCE

PT. Wasco Engineering Indonesia as Assistant NDT Coordinator

(March 2020- April 2023)

Job Description:

● Documentation and budgeting for NDT activity for each project, led and managed to be satisfied and profitable by streamlining all the available resource using technical and engineering knowledge to meet client’s expectation in timely manner.

● Project procedure review, NDT personnel register, equipment verification and data completion.

● Repair rate monitoring and assist with welding engineer for better improvement using PDCA method.

● Leverage hire skill and ability in order to place more benefit towards the company.

● Maintain contact with NDT equipment suppliers and consumable vendors to promote advances in NDT technology.

Key achieved :

- More directed and focused works for technician and easier data collection for reporting.

- Initiated and developed standard framework for technician and learning curve, reducing wasted by minimizing non-productive time during works.

- Developed efficient documentation and minimize errors by reducing unnecessary variables.

Project Involved :

- North Rumaila Compression Station TEG ( Basrah Gas Company )

- Neart Na Gaoithe Offshore Windfarm Project (Saipem )

- KG-D6 Onshore Terminal Project (Cameron-Slumberger)

PT. First Filter International as Production Planning Supervisor

(July 2018 -January 2020)

Job Description:

● Work with project personnel to generate work schedules and lead in project, manage and supervise workers to reach project schedule.

● Machine and part modification for increase production capacity, managed maintenance team for readily to cut company loss.

● Work with industry standard and client planning / scheduling software packages.

● Interface with all stake holders to update progress and generate reports as required.

● Manage work orders in the system, ensure proper creation, planning, update and closure of work orders.

● Measure and publish facilities KPI metrics to the management team, interpret data and recommend findings.

Project Involved :

- Premium Screen Drilling tools (Superior Energy Services)

- BakerWeld Wire Wrap Screen ( Baker Hughes)

- Interceptor jacket (Pertamina Drilling Services Indonesia) Page 4 of 8

PT. Tonsco International for O&M Support Gas Plant Project with JOB PTJM Bayung Lencir South of Sumatra as Project Planner & Line Check Coordinator

(October 2017 –March 2018)

Job Description:

As Planner

● Schedules, plans and oversees the entire program of work and coordinates planning activities.

● Selects the most appropriate techniques and logical sequence of activities to complete project scope.

● Inputs the work breakdown structure information in means to assess an accurate forecast on time, resources and cash flow of the project.

● Verifies critical path and interfaces between design/ engineering/ procurement / execution.

● Monitors progress periodically and compares it with the baseline planning. As Line Check Coordinator

● Pipe Check and Line Up, ensure all parts are completely installed as per latest drawing .

● Examined and validated all drawings and layout plans provided by vendor.

● Monitored and maintain all aspect of piping design.

● Ensure that all piping systems/lines are thoroughly flushed with clear water or other approved medium and are free of rust, sand, construction debris, obstructions, etc.

● Witnessing for NDT, Hydrotest and PWHT.

● Ensuring pipe alignment are done and reinstatement are doing properly. Project Involved :

- JOB PERTAMINA-TALISMAN JAMBIMERANG

PT. PCI Electronics

(April 2017 – October 2017) as Technical Advisor

Job Description:

● Responsible for part measurement using Coordinate Measuring Machine (CMM), Smart scope, Profile Projector and other tools.

● Document vendor review for compliance with requirement.

● Advice maintenance department for the frequent breakdowns, analyze the cause and the effect into the product.

● Assist engineers in product test and provide best solution for abnormality occurs.

● Assist in analyzing failures and provide technical solutions.

● Assist and advice for parts modification for better efficiency and still kept the safety factors. Page 5 of 8

PT. USENG TEKNOLOGI UTAMA

(July 2015 – January 2017) as Quality & Project Control Job Description:

● Ensures the cost control on each single project, collecting all data available in company systems and issuing the project status report including project financial data, costs and estimate to end project cost.

● Takes under control project cost control status, cash flow, revenues, profit, gross margin, opportunities and contingencies cost variances and in general economic and financial status of the project.

● Defines after project base lining, the necessary manpower for matching the targets, evaluating the weight of single WBS and standard productivity.

● To ensure procedure and review specification, inspection test plan, and welder qualification involved any process welding are set correctly.

● Coordinate Inspection with Inspector and NDT Technician for effectiveness activity.

● Keep in touch with client for discussion and any technical matters.

● Perform piping line Check, ensure all pipe spools and pipe supports are installed properly as per drawings, prepare punch list, monitor punch killing, prepare test packages, review test packages.

Key achievement :

- Project accelerated for the next stage of works.

- Ineffective time reduction for NDT technician, while kept the quality standard. Project Involved :

- Project YAMAL LNG PROJECT Client : YAMGAZ and SIEMENS

PT. Batam Era Sukses

( February 2014 – August 2014 ) as QC Inspector

Job Description:

● Monitoring production activity based on approved procedure ITP and so on in approved specification.

● Daily fit up and visual progress.

● Visual and monitoring cleaning progress.

● Documentation and MDR ( Manufacturing Data Report ) preparation.

● Follow up and arrange for NDT activity.

● Preparing Inspection & Test Record.

● Preparing daily, weekly & monthly progress report Project Involved :

- Project MODEC OFFSHORE PRODUCTION SYSTEM

Client : MODEC

Page 6 of 8

Self Employed

( February 2014 – August 2015 ) Owner for car workshop Job Description:

Establish the rules and supervise every employee, setup system, administration and ensure all employee obey the regulation.

Provide capital, risk management decisions and manage finances. Handle and audit sparepart stock and financial.

Manage materials, mechanic tools and set up for the workshop both interior and exterior.

Business development and marketing strategic, recruiting freelance to increase market target, find new market, analyze and keep creative for competition.

Develop new idea of modification, approaching customer for better services and market trend.

PT. Cladtek Bi-Metal

( May 2013 – February 2014 ) as QC Piping Inspector Job Description:

● Inspect Internal surface profile to ensure bright metal and free From surface contamination 100% by visual examination.10%Of the Pipe bore preparation can be inspected using video Camera/Boroscope.

● To Ensure NDT drawing To Fabrication

● To Ensure Procedure And review specification, inspection test plan, and welder qualification involved any process welding

● Request applicable NDT after welding complete as per inspection test plan NDT requirement

● Daily And Monthly Progress NDT Report

● Pipe Flushing using water Chloride and fresh water.

● To Check Internal Overlay Weld Cladding Thickness using a Thickness gauge (DAKOTA) or Elcometer.

● To Check Welder Qualification involved in any Process Welding.

● Follow ITP, Specification and Procedure

● Request applicable NDT before and after Welding

Project Involved :

- Project Pipe Spoll ( Weld Clad Overlay)

Client : SAUDI ARABIAN OIL COMPANY & CHIYODA SINGAPORE,

- Project CT-138 Shah Gas Dev PKG 4 U&O

Client : SAMSUNG ENGINEERING

- Project CT-144 Wasit Arabiyah & Hasbah Offshore and Onshore Facility. Client :SAIPEM. SPA

- Project CT-77 Gorgon Up Stream

Client :GE-VETCOGRAY

- Project CT-156 Perla Field Early Production Development Client :CARDON.IV.SA

Page 7 of 8

PT. Mc CONNELL DOWELL SERVICES

( August 2008 – April 2013 ) QC Inspector and NDT Coordinator Job Description;

● Led and managed a project to be satisfied and profitable by streamlining all the available resource using application of management, engineering, and technical theory supported by the utilization of company technology to meet client’s expectation in timely manner

● Witness and oversee daily activities and related inspection activities in piping, structural and mechanical and NDT checks like RT, MT, PT and UT.

● Ensure testing, measuring, welding, and NDE equipment is fully calibrated and has current certification.

● Keep in touch with draft man to allocate joint report every single item of changes in Fabrication.

● Monitoring production activity based on approved procedure ITP and so on in approved Specification.

● Follow up NDT result and take further action for completion.

● Keep in touch with Client to witness and discuss any technical matters

● Monitor welder performance continuously, set in motion the corrective actions when the quality levels / trend is not in acceptable levels

● Coordinate and supervise Technician for NDT Inspection.

● Witness furnace PWHT and Local PWHT of piping works

● Verify Contractor, Subcontractor Quality management systems, plans, procedures, and processes are in place.

Key achievement :

- Achieved Exceed expectation Employee during employee assessment and performance during first semester of work.

- Created and combine supporting environment between quality, safety and productivity.

-

Project Involved :

- EXXON MOBIL, SINGAPORE PARALLEL TRAIN

- (SPT- Pipe Racks PARs/SBRs & Associated Piping)

- RGP 5 & Australia, GANGWAY ACCESS PLATFORM, WHARF HEAVY LIFT PIER STEELWORK

- KONIAMBO NICKEL PROJECT

- MARINA BAY SANDS

- MAKIRA BRIDGES

- FMG 2nd OUTLOADING CIRCUIT

- HEEREMA MARINE CONTRACTORS NEDERLAND B.V

- JURONG PORT SHIPUNLOADER

- APACHE JULIMAR DEVELOPMENT

PT. INFINEON TECHNOLOGIES

( May 2006 – August 2008 ) as Specialist Technician Page 8 of 8

Job Description :

● Technical support for production activity.

● Evaluate production method, machine, material and manpower.

● Improvement activity with QA/QC Team and Production supervisor.

● Track data, identifies improvement projects, and manage cross-functional implementation to improve performance of key components and Suppliers

● Monitoring the activities to confirm compliance with installation instruction and aware of all quality requirements for the project.

● Makes daily, weekly, monthly report engineering activity.

● Yearly overhaul for production machine.

● Identify issue affecting to company asset and made mitigation plan to prevent any possible lost in company.

● Handle daily troubleshooting for production machine. PT. PANASONIC ELECTRONIC DEVICES SINGAPORE

( Desember 2005 – May 2006 ) as Production Supervisor Job Description;

● Installation of new Machine and Equipment.

● Led new recruits, train and provide knowledge to team.

● Evaluate production method, machine, material and manpower.

● Handling Electrical and Mechanical troubleshooter.

● Develop and review quality plan with Suppliers to ensure continued conformance, maintain good product quality and be able to allocate immediate assistance/resources in order to prevent further damages (production line down and shipment stoppage).

● Manage a team of Process & Quality, providing them with technical guidance towards achieving the company’s goals, objectives and department KPI.

● Developed supporting environment to achieve company target and conducted identification of issues affecting the team, escalate as appropriate and assist with the implementation of long term solutions to minimize customer impact.

● To ensure daily target are reached and preparing report for management.

● Set Up New Line, manage manpower and machine.

● Audit preparation and as internal auditor.

Contact this candidate