Control System Instrument Engineer

CURRICULUM VITAE

HANEEF AHMED

EMAIL:************@*****.***

MOBILE NO: +966*********/+966*********.

Objective:

To take up new challenges and opportunities and grow with the organization using my technical skills and hard work for gaining international work experience.

ACADEMIC QUALIFICATION:

Bachelor of engineering in electronic and communication engineer from OSMANIA UNIVERSITY, Hyderabad, India.

Technical qualification:

● Cisco certified network associate (CCNA) from net-matric solution, Hyderabad, India.

● scada designing in wincc explorer, plc programming (simatic manager, TIA portal of Siemens, RSlogix 5000 of Allen - Bradley), Sppa T3000 DCS system of Siemens, centum vp of yokogawa, pdms (process designing and management system), sp3d & smart plant instrumentation software for instrumentation designing.

●Microsoft certified security expert (MCITP) from net-matric solution, Hyderabad, India.

Technical skills:

●Detailed knowledge of Siemens PCS7, Distributed Control system (DCS), advanced process control (APC), proficiency in TIA portal, wincc, simatic manager, centum vp/Cs 3000 yokogawa, pro-safe Rs, prosafe-sls (safety instrumented system of yokogawa), care, EBI software of Honeywell, familiar with Experion pks operating, configuration troubleshooting displays

●Development, Engineering, Saudi Aramco engineering standard(SAES), Factory Acceptance Test, Testing & Commissioning and Site Acceptance Test

●Hands on ability on Drawings like Panel GA & Wiring Drawings, System Architecture, P&IDs, Loop Drawings, Scada Layout Drawings.

●Hands on ability on Documents like Functional Design Specifications, I/O List, Control Philosophy/Sequence of Operation, Cable Schedule, Material Submittals, O&M Manual, and Training Manual.

●Honeywell EPKS (C300/SM/HMI) systems.

●Hands on ability to configure, calibrate, troubleshoot and repair various plant process instrumentation related to temperature, pressure, flow, level, actuator, VFD, transmitter and other plant process variable.

●Calibration and troubleshooting of analyzers like conductivity, chlorine, ph., Tds, dissolved oxygen, fixed gas detection detcon brand (h2s, lel, toxic gas, combustible gas), moisture, photometer(IR,UV).

●Commissioning and configuration of plc’s (Siemens s7 300, s7 400, s7 1200, s7-1500, Allen -Bradley SLC 500, Compact and micro Logix), hardware and software diagnostic of plc's.

●Commissioning of RTU panels.

●P&id designing in edrawmax software, loop drawing for analog input and output, digital input and output, cold loop and hot loop checking, process designing in pdms software.

●Development of instrument index, i/o lists, range/alarm/trip/shutdown schedules, system block diagram, functional block diagram, sop for plant startup and shutdown.

●Detailed understanding of automation system, substation automation system, configuration of IED’s, protection relays,701SEL motor protection relays, configuration and calibration of level, flow, pressure, tds transmitters, DCS system (Honeywell TDC-3000) B.M.S Honeywell EBI R500 software, motorized operating valve (limit torque, rotork),control valves, on –off valves and intelligent devices in operation and maintenance project.

●Familiar with various communication protocols: sinautst7, DNP3, MODBUS serial communication through RS 232,485,422, Modbus tcp/ip, profibus, profinet, foundation fieldbus, Ethernet, hart protocol.

IT SKILLS:

●Trained in CCNA, MCITP.

●Trained in sap.

●Software installation and up gradation in server and pc.

●Managing Network Device Security.

●Building Small and Medium sized networks.

●Troubleshooting Basic Connectivity.

●Detailed knowledge in networking, LAN, WAN network.

●Implementing DEFAULT, EIGRP and OSPF-based solution to networks.

Work experience:

●From November 2020 to at present working as instrument engineer in yansab petrochemical company (sabic affiliate ).

●From September 2014 to at 2020 as an instrument engineer in Arabian fal limited co., (contractor of Saudi Aramco).

●July 2013 to July 2014 worked as automation engineer in Tata services, India.

●April 2011 to July 2013 worked as control system engineer in super communication services, India.

JOB PROFILE AT YANSAB /SAUDI ARAMCO

●Providing engineering support and issuing of technical guidance in all aspect of plants process controls systems and equipment including DCS, scada system, RTU, PLC and related control panels.

●Resolving operational and design issues.

● In depth knowledge of international codes API, IEC, ISA, NFPA, PIP, ASME, AND ANSI.

●Preparation of instrument data sheets with respect to process.

●Preparation of material requisitions, evaluation of technical offers.

●Selection and application of filed instruments according to process conditions.

●Review and approve of instrumentation design documents.

●Troubleshooting all instruments (dp, radar, magnetic, displacer transmitters, control valve and on-off valve)

●Troubleshooting all instrument related malfunctions and to find out the root cause analysis of plants chronic problems, to find solutions for resolving such problems.

●Preparing technical presentation at conferences.

●Control valve selection, providing recommended spares for overhauling.

●Technical evaluation of instrument spares.

●Providing New ideas for improvement.

●Designing of p&I’d diagram, instrument logic diagram, block diagram, instrument loop diagram, instrument specification sheet.

●Programming in rs logix 5000, designing and editing in factory talk view site edition, commissioning of plc i/o as per loop diagrams at sewage treatment plant.

●Commissioning and troubleshooting of yokogawa dcs system using centum vp/cs3000, configuration of field control system FCS, and safety control system scs of yokogawa.

●Carrying out instrument sizing calculations and verification checks, reviewing and developing P&IDs for correctness in respect of control & safety requirements and instrumentation.

● Attending coordination meetings and engineering review meetings with supplier as required, reviewing document requirements and issuing dates for major equipment with suppliers and assisting Procurement Department in compiling a Supplier's Document Index.

●Executing cold loop and hot loop checking of filed instrument devices, designing of loop diagram for analog input and output, digital input and output.

●Commissioning and configuration of instrument devices like plc, Rtu cabinet, electronic actuator, sensors, transmitters, VFD etc.

●Configuration and troubleshooting of motor protection relays multimin 701.

●Electrical and instrumentation control panel designing (marshalling cabinet, main control panel).

●Configuration of protection relays (differential, transformer, bus, line, controlling) IED’s (circuit breaker controller, capacitor bank switches, voltage regulator etc.).

●Troubleshooting and calibration of Siemens, Rosemount, yokogawa and Honeywell intelligent devices like level, pressure, flow, TDS, RTD, Thermocouple temperature transmitters by five-point calibration method.

● Commissioning, installation, troubleshooting and remote configuration of rotork motorized operating valve (mov), auma pressure control valve, limitorque flow control valve.

●Troubleshooting sinaut st7 modem, Tim, adjusting transmission speed from modem to receive strong signal.

●Install, test, and start-up control systems on site.

●Installation and configuration of DPA dual set point process alarm module to run electric motor in auto mode as per settings in DPA, which receives signal from transmitters.

Achievements:

●Received appreciation certificate for the up gradation of Siemens scada system.

●Received appreciation certificate from Saudi Aramco superintendent for troubleshooting master control panel of STP.

●Successfully completed the new pcv project in which controlling a valve through scada and hmi system working as instrument engineer in the Saudi Aramco project.

Job profile at Tata services:

●Troubleshooting ALTIVAR 66 and ALTIVAR 61 VFD.

●Troubleshooting plc. Connected with different intelligent devices like access control system biometric card reader, temperature, pressure and flow transmitter.

●Installation and troubleshooting of motorized operating vale

●Guiding technician for the proper installation of intelligent devices.

●Hardware diagnostic of Tata sky modem.

●Troubleshooting and fixing LAN area network connected to pc.

Job profile at super communication services:

●Site execution, Installation and Commissioning of CCTV camera (analog& ip) and Access Control System.

●Troubleshooting of ip, infrared rays, day and night camera.

●Supervision of laying containment, cables Installation, termination commissioning of field devices.

LICENCE: Saudi Arabia, Saudi Aramco community driving license.

PERSONAL INFORMATION

Last Name AHMED

First Name HANEEF

Date of Birth 02/02/1991

Nationality Indian

Address Hyderabad, India

Mobile Number +966*********, +966*********.

Email Address ************@*****.***

DECLARATION

I believe in the fact that no one is born master. Everyone develops himself by learning from the surroundings but I can assure you that I am quick learner & I do have guts to turn on the key to success by working hard. I do hereby declare that all the above statements are true to the best of my knowledge.

Contact this candidate