Anthony J. Musso III

ady3o3@r.postjobfree.com 770-***-**** Cartersville, GA

WORK EXPERIENCE

MECHANICAL ENGINEER March 2023-Present

HYUNDAI ENGINEERING OF AMERICA – CARTERSVILLE, GEORGIA Full Time Contractor

Primarily responsible for optimizing the performance of mechanical products, machinery, and equipment through assisting the Mechanical Engineering Manager with designing mechanical products, analyzing performance results, and maintaining mechanical equipment and machinery. Document Control (Contract, RFP, RFA, NCR, ETC). Utilize ZWCAD 3D Software.

Assist with mechanical construction work such as utility piping, HVAC, boiler, compressor, and electrical.

Negotiate Sub-Contractor bidding cost for project build. Assist project team leads with project tasks.

Provide guidance for HVAC, boiler, compressor, and electrical installation following proper state and federal compliance codes.

Perform project coordination, sourcing of suppliers and contractors to build a large Lithium Ion EV Battery plant. AEROSPACE CUSTOMER QUALITY SUPERVISOR December 2022-March 2023 KUEHNE NAGEL – UNION CITY, GEORGIA Full Time Contractor

Responsible for all quality concerns for the customer (Pratt and Whitney). Non-Conformance Manager. Applied Lean Six Sigma concepts to drive root cause and corrective action on defects, complaints, and non-conformances. Followed 8D methodology.

Supervised two employees in a team effort to maintain the Quality Management System requirements. Managed inventory management system for auditing and accuracy. Utilized SharePoint. Monitored and Tracked ITAR related issues. More duties can be provided. SR. QUALITY ENGINEER / SUPPLIER QUALITY ENGINEER December 2021-December 2022 MIRUS MEDICAL – MARIETTA, GEORGIA Full Time Reduction in Force

Directly supported CAPA, training, and audit preparedness, for the Quality Management System in a medical device manufacturing environment. Epicor Implementation team member. Utilized SolidWorks to view and change CAD drawings.

Supported compliance in all phases of design and development, manufacture, validation, testing and product release.

Authored, reviewed, and approved SOPs, protocols, test reports, and other quality regulated records for accuracy and compliance with all applicable regulations, international standards, and internal procedures utilizing Lean Six Sigma tools and principles.

Managed and tracked deviations, non-conformances, CAPAs, and customer complaints. Managed Material Review Board, process change controls, supplier management program, supplier performance, and maintained Approved Supplier List.

Managed Engineering Change Notifications, configuration management, document Change Orders, PPAP, and APQP processes. Tracked DFMEA/PFMEA actions providing quality guidance. Managed document control.

Created/refined test strategies, plans, and produced quality metrics reports for analysis.

Conducted receiving, In Process, FAI, and product release duties utilizing calipers, vision, optical comparator devices.

Performed Internal or Supplier Quality System Audits supporting ISO 13485:2016 and FDA 21 CFR 820 regulatory program. QUALITY ENGINEER / SUPPLIER QUALITY ENGINEER / MANUFACTURE ENGINEER August 2020-December 2021 ENVISTACOM - DULUTH, GEORGIA Full Time Better Opportunity

Managed and developed quality practices and process documentation while driving continuous improvement.

Directed problem resolution efforts while collaborating with cross functional teams SMEs in various departments.

Worked directly with Engineering during product design and development to increase product reliability. Managed SharePoint front end used for non-conformance reporting and control on Military and Commercial products. Configuration Management Board member.

Directed efforts to track MTTR, MTTF and MTBF during manufacturing and testing. Managed PPAP actions and APQP planning.

Performed disposition, analysis, and quarantine of nonconforming product and material. Non-conformance manager.

Performed statistical analysis of product inspection/test data to mitigate trends as they are identified (PFMEA). Conducted validation testing and acceptance. Created test plans for validation testing.

Facilitated root cause analysis, corrective action and preventive action of internal CARs and external SCARs.

Analyze, and interpret technical data, contract requirements, statements of work and engineering drawings. Administered and led a team for DFMEA and PFMEA actions. Performed software and hardware integration testing and final approval.

Assigned alternately as a Manufacture Engineer to create ECN’s, BOM’s, and update Drawings utilizing SolidWorks.

Applied Six Sigma methodology to inspection test data in support of product reliability and maintainability, improved effectiveness of the product design/build/inspection process and overall support of the Quality Management System.

Tracked Supplier quality metrics and reporting. Managed supplier performance for quality and delivery improvement efforts. Followed ISO 9001:2015/AS9100 and CMMI standards.

QUALITY ENGINEER II / SUPPLIER QUALITY ENGINEER March 2019-July 2020 HONEYWELL AEROSPACE - NORCROSS, GEORGIA Full Time Reduction in Force, Covid 19

Conducted Quality Management System audits under ISO 9001:2015, AS9100 standards, and FAA audits for CFR145 Repair Station. ODA unit member. Conducted airworthiness return to service or repaired components. Tracked DFMEA/PFMEA.

Evaluated and applied continuous improvement concepts to improve quality output and process enhancements. Completed training for Honeywell Greenbelt certification for Lean Six Sigma. Technical writer creating and approving documents. Conducted validation testing. Anthony Musso Page 2

Continued

Spearheaded process improvement initiatives for the Quality Management System that ensured compliance with customer requirements, regulatory agency requirements, government regulations and engineering specifications, while instilling site accountability for the Quality System. Proficient in Blueprint reading and GD&T. Authored and administered control plans. Utilized the 6S methodology.

Performed Risk Analysis and Root Cause Analysis utilizing Lean Six Sigma methods and tools. Led Kaizen and GEMBA walk events.

Managed suppliers and conducted supplier audits. Collaborated with customer quality representatives on product and customer quality concerns.

Collaborated closely with product and test engineers on creating test plans, ECN changes, process improvements, and testing methods.

Utilized SAP to manage Quality Notifications, run quality analytical reports for trend monitoring, and correct operations for Service Orders. Maintained SAP inventory control. SAP power user.

Utilized Teamcenter, Skype for Business, AutoCAD, MS Teams, Adobe Pro, and Microsoft software products. AEROSPACE MAINTENANCE TECHNICAL INSTRUCTOR April 2018–March 2019 GP STRATEGIES AT LOCKHEED MARTIN AERO - MARIETTA, GEORGIA Full Time Contractor

Conducted instructor led training across multiple areas of maintenance practices for C130, C5, and F35 programs. Qualified to teach fifty- seven different class subjects in Aircraft Structural, Electrical, Coatings, Quality Control, Industrial equipment and Safety programs.

Subject Matter Expert proficient in blueprint reading and GD&T. Technical writer creating course content. Conducted training in Quality Control methods and Quality Inspection best practices. Utilized Microsoft software as needed.

Developed course content as a subject matter expert in aircraft maintenance practices, structural, electrical, and Inspection techniques.

Utilized Lockheed systems such as DIMS, SFM, and My Learning to schedule instructor led training classes per Lockheed requirements. AIRCRAFT MAINTENANCE TECHNICIAN / AVIONICS TECHNICIAN December 2017–April 2018 GULFSTREAM AEROSPACE CORPORATION - SAVANNAH, GEORGIA Full Time Contractor

Performed all line maintenance A&P tasks on G150, G280, G500, G550, and G650 airframes. Troubleshoot maintenance and avionics issues as needed. Serviced aircraft fluids as needed. Proficient in Blueprint reading and GD&T.

Proficient in utilizing SAP, CATIAv5, Solumina, PdocM, SmarTeam, Corridor and CMP programs. SENIOR QUALITY SUPERVISOR May 2016–October 2017

PRATT & WHITNEY ENGINE SERVICES - COLUMBUS, GEORGIA Full Time Reduction in Force

Supervised over twenty-eight personnel in Production Control, Warehouse, Repair shop and a Quality team of inspectors performing inspections and returning to service engine parts for PW V2000, V2500, F117, GTF1100, and GTF1500 engines.

Utilized SAP for production analysis, budget, payroll/time accounting, and maintenance documentation.

Managed a 3+ million-dollar departmental budget for a large engine parts warehouse. Interview and hire team members.

Oversaw manufacturing, engine overhaul, inspection, and repair processes to drive continuous improvements to processes.

ACE (Lean Six Sigma) team member for process improvement. Conducted Risk and Root Cause Analysis for non-conformance issues.

Conducted GEMBA walks and led Kaizen events to improve processes. Technical writer for process changes.

Developed process standards and reviewed/approved changes to repair station procedures. Conducted internal site audits for the ISO 9001:2015/AS9100 Quality Management System, EH&S, and cell safety inspections. Proficient in Blueprint reading and GD&T. MANUFACTURING INSPECTOR January 2016–May 2016

HONDAJET - GREENSBORO, NORTH CAROLINA Full Time Contractor

Performed inspections on Hondajet 420 aircraft utilizing drawings and Hondajet process standards.

Certified all work conforms to engineering process standards and built to blueprint during the aircraft manufacturing process.

Utilized SAP for inspection call board, Quality Notification, and work process completion.

Worked closely with FAA DER/DAR inspectors to ensure work standards are to FAA requirements. SR. CERTIFICATION INSPECTOR December 2013-December 2015 GULFSTREAM AEROSPACE CORPORATION - SAVANNAH, GEORGIA Full Time Reduction in Force

Performed airworthiness inspection duties utilizing accepted/approved data including QC/QA procedures, instructions, engineering documents, and other related documents. Proficient in Blueprint reading and GD&T.

Managed and performed first article inspections to ensure compliance with FAA and/or ODA approved procedures.

Performed inspections and certified aircraft/components as airworthy prior to delivery. Returned to Service GIV, G450, GV, G550, and G650 airframes, avionics, and associated engines. Returned to service major modifications and supplemental STC items.

Performed inspections and Issued FAA 8130-3 Forms in accordance with FAA/ODA and EASA requirements. Generated 8130-9 Statement of Conformity Forms to certify conformity and installation criteria. Performed conformity, prototype, and export inspections.

Oversaw repair station compliance to the requirements of 14 CFR Part 145 and the FAA accepted site Repair Station and Quality Control Manuals.

Proficient in utilizing SAP, CATIAv5, Solumina, PdocM, SmarTeam, Corridor and CMP programs.

Provided technical support to inspection personnel in supporting the FAA and/or ODA documented requirements for STC major/minor modifications.

Worked closely with engineering for revisions to STC modifications and approval requirements for major/minor repairs. Anthony Musso Page 3

Continued

Lead certification inspector managing the G650 seat retrofit program.

Worked with avionics installation teams on troubleshooting, repair, and modification of avionics systems per STC requirements. Verified fit, form, and function.

Completed certified Gulfstream Avionics Technician course. Conducted training for acceptance into Gulfstream ODA program. Completed Gulfstream CATIA v5 training course and utilized CATIA v5 to review drawings. NETWORK/SOFTWARE ADMINISTRATOR/PROJECT MANAGER October 2005–September 2013 PHOENIX AIR GROUP INC. - CARTERSVILLE, GEORIGIA Full Time Company Lay Off

Managed and planned multiple large projects for LAN, Wi-Fi, security camera system, Door Security, and Avaya IP Office Digital VOIP telephone system. Networks spanned over 6 large buildings with cable and fiber connections.

Planned, developed, and implemented network security measures to provide malware defense, virus detection, and intrusion detection. Performed virus and malware removal. Information Security coordinator for the IT department.

Project Manager responsible for implementation of Pentagon2000 SQL ERP inventory and management software.

Project Manager responsible for multiple building low voltage wiring upgrades consisting of Cat5e, Cat6, Fiber Optic, and RG6 cabling.

Project Manager responsible for implementation, installation, maintenance, troubleshooting, and repair of Avaya Digital IP Office VOIP phone system. Responsible for coordination and procurement of technology assets.

Project Manager responsible for implementation of 270 security cameras and associated network.

Managed and implemented multiple software programs following the SDLC life cycle. Implemented SolarWinds network monitoring software and Spiceworks Help Desk software. Managed and coordinated user help desk tickets.

Managed, maintained, installed, and troubleshot multiple computer networks, hardware, software, printers, door security components, telephone system components, and camera surveillance system components.

Coordinated Internet Service Providers and IT services for the company’s IT requirements.

Developed IT policies and procedures. Developed data management and disaster recovery policies and programs.

Developed multiple training programs and conducted instructor led user training for ERP and company software applications.

Utilized network security tools (SolarWinds) and Wireshark to monitor networks to ensure network security and server availability to users both onsite and remotely.

Created test plans and developed testing methodology for testing new company software.

Managed, maintained, and administered 28 servers, 225 desktop computers, 68 Laptops, 52 printers, Cisco routers, Cisco 2000 and Cisco 300 w/POE switches, Cisco firewall, 157 Digital phones, 23 VPN phones, 37 Android/iPhone smartphones, and 75 iPads.

Configured and administered Avaya 9600 series VOIP VPN phones utilizing IPSEC, IKE, and PSK security protocols.

Configured and maintained Static IP and DHCP IP routing configurations.

Coordinated and utilized directory services in Active Directory. Utilized SCCM and WSUS to update and deploy applications.

Administered Group Policy assignments and login scripting.

Configured and maintained Mobile Device Management software for iPad configuration and updates.

Maintained Access and MySQL databases. Some experience in database development.

Configured and supported multi-level network/local PC backup routines.

Developed and maintained three company HTML/PHP websites.

Installed, maintained, repaired door access security devices, and camera security systems.

Performed custom PC and high-end server builds. Conducted burn in and reliability testing.

Over 20 years of experience with buildup, configuration, and repair of Windows computers, MAC computers, and printers.

Planned, configured, and maintained secure data center racks and cabling.

Built, configured, and maintained Windows servers running Windows Server 2003, 2008, 2012, Linux Suse and IIS.

Installed and provided help desk support for Microsoft Windows 95/98/ME/XP/7/8 and 10 computer systems.

Setup and maintained virtual machines utilizing VMware and Hyper-V.

Proficient in utilization of the following software: Adobe Acrobat Pro/AD, Dreamweaver, MS Visio, MS Project, Adobe Creative Suite, Adobe Photoshop, Pentagon 2000SQL, Solumina, AutoCAD, Citrix GoToMyPC, LogMeIn, TeamViewer. Advanced user in MS Office Suite, SAP. Proficient in HTML, XML, and CSS design for web sites.

Performed inspections on Gulfstream GI, GII, GIIB, GIII, Citation V, and Learjet 35/36 airframes in accordance with AMM, CMM, and FAA directives for CFR Part 91, 135, and 145 operations. Worked with avionics on troubleshooting, repair, modification, and installation of avionics systems. Created and certified form 337’s for major repair and alterations. Managed conformity and first article inspections for DER and AMOC recertification. Performed RII inspections when needed and returned to service aircraft from maintenance. Proficient in Blueprint reading and GD&T. Utilized drawings and schematics for fabrication and repair of all airframes. AIR RESERVE TECHNICIAN March 2003-October 2005

U. S. AIR FORCE RESERVE/926 FW - BELLE CHASSE, LOUISIANA Full Time Unit Closed Katrina

Responsible for maintenance and repair of A-10 aircraft. Engine run and APU qualified.

Supervised line maintenance operations for eighteen aircraft. Managed phased inspections and maintenance as required.

Troubleshot and repaired avionics, electrical, hydraulic, fuel, and engine systems. Performed avionics system and electronic communication system checks. More duties can be provided upon request. Anthony Musso Page 4

AIRCRAFT MAINTENANCE TECHNICIAN / AVIONICS INSTALLER / INSPECTOR August 2002-March 2003 RAYTHEON AEROSPACE - PANAMA CITY, FLORIDA Full Time Contractor

Performed avionics system installations of BF Goodrich TCAS and ADAS systems. Fabricated and installed wiring harnesses. Troubleshot, repaired, and maintained avionics systems under CFR Part 121 requirements.

Certified to download and evaluate Digital Flight Data Recorder data.

Performed pitot static certifications and avionics checks per FAA requirements.

Performed return to service, minor/major inspections, Required Item Inspections, and engine overhaul inspections on PW PT6-65/67 engines following CFR Part 121 requirements. Borescope qualified. Engine run and taxi qualified.

C-12 program Lead inspector on King Air 200/350 airframes for the Department of Navy. Proficient in Blueprint reading. DIRECTOR OF MAINTENANCE August 2001-August 2002

ONSITE AVIATION / FLIGHT TEK - ORLANDO, FLORIDA Full Time Company Closure after 9/11

Responsible for over 142 personnel and all maintenance operations in a CFR Part 145 repair station.

Developed the CFR Part 145 operations and quality maintenance program to obtain FAA 145 Repair Station certification.

Technical writer creating work processes and standards for the maintenance program, quality program, training program, and the business model. Recruited and hired company personnel. Oversaw daily operations of the company.

Managed budget and assets worth over $2 million dollars.

Developed strategies and plans for future business goals.

Utilized tools to analyze and promote continuous improvement of processes. BASE MANAGER / INSPECTOR / AVIONICS TECHNICIAN December 1999-August 2001 ASWS AVIATION - READING, PENNSYLVANIA Full Time Company Closure

Responsible for air carrier operations and maintenance in an FAA CFR Part 121/145 maintenance base with 25 B1900D aircraft and 28 personnel. Responsible for recruitment of staffing positions. Managed a large maintenance facility and facility upkeep.

Established training guidelines and implemented training programs. Technical writer for company procedures.

Managed a multi-million-dollar parts warehouse and budgeting for the facility.

Troubleshot, repaired, and performed avionics system checks. Proficient in Blueprint reading and GD&T.

Performed avionics installation and upgrades to aircraft systems.

Performed line maintenance on B1900D, CRJ200 and ATR-72 airframes. Engine run and Taxi qualified.

Performed maintenance inspections, return to service, and RII inspections as needed.

Performed maintenance repair and troubleshooting on PW PT6-65/67 series engines. LEAD MECHANIC / PRODUCTION PLANNER January 1997-December 1999 TIMCO - GREENSBORO, NORTH CAROLINA Full Time Reduction in Force

Responsible for eighteen A&P mechanics and completion of A, B, C, and D checks with heavy maintenance and overhaul at a CFR Part 145 repair station. Coordinated job estimation and approvals with customer representatives.

Performed scheduled and unscheduled maintenance on DC8, DC9, DC10, B727, B737, B757, B767, and A300 aircraft.

Performed maintenance and inspections on PW4000, CF650, CF680, JT8, JT3, and CFM56 engines.

Performed structural and interior modifications on B737, B757, B767 and A300 aircraft following accepted blueprints.

Responsible for cargo conversion modifications on B767 aircraft.

Troubleshot, inspected, and maintained aircraft systems, engines, and avionics. Assisted avionics personnel with avionics system upgrades. Proficient in Blueprint reading and GD&T.

Planned and coordinated maintenance actions on multiple airframes and multiple projects. FOREMAN / MAINTENANCE CONTROLLER / INSPECTOR / AIRCRAFT MAINTENANCE TECHNICIAN September 1994-January 1997 USAIR EXPRESS/MESA AIRLINES - READING, PENNSYLVANIA Full Time

Responsible for CFR Part 121/135 air carrier operations, heavy maintenance, and line checks on B1900D airliners.

Supervised 15 maintenance personnel maintaining a 98% on time maintenance program.

Performed maintenance control and scheduling for a fleet of 25 B1900D aircraft. Inspected and maintained PT6A-67D engines.

Performed scheduled, unscheduled, and heavy maintenance repairs. Engine Run/Taxi qualified.

Performed routine inspections, return to service, and RII inspections on engines and airframes. Level I Eddy Current, Dye Penetrant, and Mag particle inspection certified.

Troubleshot, repaired, aircraft systems and avionics systems. Performed pitot static and certification checks on avionics systems. Proficient in Blueprint reading and GD&T.

Supervised a 2-person line maintenance operation at a hub with 55 flights a day. LINE SUPERVISOR / AIRCRAFT MAINTENANCE TECHNICIAN December 1986-October 2009 UNITED STATES AIR FORCE - Multiple Locations Active Duty, Air Guard, Air Force Reserves E-5

Responsible for troubleshooting, repair, and heavy maintenance on F-15A, B, C, D, E, F-16C Block 30/35, and A-10A aircraft and oversight of all maintenance on 22 aircraft with 18 personnel.

Achieved 100% task qualification on F-15 models under the rivet work force program integrating hydraulic, engine, and airframe shop. Engine run, trim, and hush house qualified.

Anthony Musso Page 5

Continued

Troubleshot and performed all maintenance and inspections on PW F100-PW-110, PW F100-PW-220, GE F-110-GE-100, and TF34 engines.

EDUCATION

Bachelor of Science: Information Technology, Network Admin/Security (Summa Cum Laude) October 2015 Westwood College of Technology, Denver CO, GPA: 3.87 Associate of Applied Science: Information Technology (With Honors) October 2013 Westwood College of Technology, Denver CO, GPA: 3.9 CERTIFICATIONS / TRAINING

Active Secret Security Clearance (2020) Flight Safety International – Beechcraft 1900 Series Airframe and Power Plant License (1992) Boeing 767 Familiarization Course Inspector Authorization (2006-2009) Airbus 300 Familiarization Course Certified Avionics Technician (Gulfstream) ETOPS Familiarization Course CATIAv5 Certification Course (Gulfstream) PW V2500 Engine Familiarization Course Honeywell Aerospace ODA Unit Member PW GTF1100 Engine Familiarization Course PW GTF1500 Engine Familiarization Course Certified IPC Specialist IPC/WHMA-A-620, 610 SUMMARY

I am a consummate professional that has skills in multiple areas of business. I am a highly trained and very versatile person that believes in the Team concept. I have provided top notch quality and efficient work output in high paced and stressful environments. I strive for both quality and quantity. I have two career paths one with over 30 years of experience working in Military and aerospace where I gained the foundation of leadership and management concepts. I have extensive troubleshooting knowledge on airframe systems, engine systems, electrical, and avionics systems. I have many years of experience in leadership roles such as an Inspector, Supervisor, Manager, and Director. I am highly skilled in computer project management, computer repair, computer troubleshooting, and have significant knowledge of a broad range of computer software, hardware, and networking systems. I am a 17-year military veteran with campaign badges for wartime participation. I am a fast learner and feel confident that I can be a valuable asset to your company. I am striving to secure positions in: Quality Management, Quality Engineering, Manager, Network Engineer, Network Administrator, and Systems Engineer.

Contact this candidate