Furgus l. Wilson

Recruiters Summary:

Furgus Wilson has experience of spanning over 20+ years working as a Facilities Supervisor/ Project manager, Maintenance manager whereas a few of his day to day responsibilities were • Asset management project including HVAC, BMS project and complete reconstruction of building alarm system and manufacturing machines both electrical mechanical upgrade • Integrated parts program into Maximo • Met with architects, interior /exterior designers, contractors, building inspectors and ensured buildings were in compliance with city, state and federal rules Created CMMS program to get the department away from paper preventative maintenance program. Managed janitorial staff and security of the facility • Create and maintain comprehensive project documentation • He can help people to “think out loud,” that reflects on his experiences, identifying problems and developing solutions on them. He is also Bilingual in German reads European and American prints.

Objective:

To find a position utilizing all of the skills I have learned throughout the years. The ideal job would be in the Service or contractor industry, as a Project Manager, or Maintenance Manager/Supervisor.

Education and training:

• South Haven High School 1980

• Siemens Apogee Workstation operation certificate (BAS)2009

• Ferris State machine tool technology 1981

• U.S. Armies' Nuclear Electronics School 1981

• Kolping community college 1986

• Allen Bradley Certificates of completion 1991

• Ge Fanuc Automation certificate 1995

• LaSalle University B/S in Management Diploma 09/96

• Motoman Robotics certificate 1996

• SAP training Kraftfoods/Georgia Pacific/Bio-rad

• University of Wisconsin Project Management Institute (2) certificates 1998

• HRP: Air Emissions training certificate of achievement 2005.

• Kraft Foods certificate series: 2006/2007

• Fetzone Confined Space certificate: 2008

• Project management Professional certificate (PMP) 2014

• Six Sigma lean professional certificate 2015

• Change Management professional certificate 2015

• Tesol teaching certificate 2015

Employment History:

Tiburon Peninsula Club, September 2022 to present.Director of Facility Maintenance /Engineering. Reporting to the general manager, manage contractors heating and air conditioning, plumbing, electrical, landscaping, and pool maintenance overseen the installation of security cameras,Dave’s, routers and switches for building security. Managed landscaping/ but

Beautification projects and construction general contractors on facility capital expenditure projects. Implemented CMMS system in a program called “brightly” asset management, and created predictive maintenance program with QR codes managed future projects, cap, expenditure projects, and planning and permitting.

Gate Gourmet, CA-October 29th, September 2022 Reported to the Hub VP SFO .Chief Engineering Director performed various skilled and semiskilled tasks to maintain a 24/7 facilities operation. Responsibilities include maintaining the mechanical, electrical, and life safety equipment as well as, the appearances of the facilities and grounds at various property locations. The position also assisted with scheduling and overseeing the work performed by various contractors ensuring they use safe practices, do quality work and clean up their work area. Chief engineer managed a crew of 7 technicians and 30 porters. Scheduling deep cleaning, sanitation projects, coordination with stakeholder on scheduled maintenance and cleaning.

Main Duties and Responsibilities:

o Schedules, oversees and may assist assigned contractors ensuring the safety, quality and cleanliness of work performed. Escorts contractors in critical areas when required.

oPerform/Manage staff in building repairs including drywall, paint, wall-covering, ceiling tile and grid, carpet and tile flooring, door and door hardware.

oPerform/Manage staff plumbing repairs including faucets, sinks, urinals, toilets, drains, and valves.

oPerform/Manage staff exterior repairs including but not limited to irrigation, signs, fence, roof, and metal siding.

oPerform/Manage staff daily site inspections of the facilities and mechanical equipment to ensure proper operation.

oPerform/Manage staff preventive maintenance to building systems and equipment as assigned and creates equipment check sheets as requested.

oProvides a report to the Vice President noting any problems found.

oPerform/Manage staff repairs of Heat Ventilation Air Conditioning (HVAC) systems, which may include heating boilers, air conditioning units, VAV boxes, exhaust fans, building automation controls and filter replacement.

oPerform/Manage staff electrical repairs, such as replacing lamps, ballasts, switches, receptacles, cord caps, wiring of single and three phase motors, and installation of circuits.

oManages work requests, creates spreadsheets for and maintains an inventory of tools and supplies, creates online purchase orders for parts and supplies as required.

oManages office furniture reconfigurations, furniture moves and office moves, as requested.

Steephill, CA Feb 2018 – July 2019 Facilities Manager Responsibilities: Oversee the day-to-day operations of Steephill laboratories and offices to ensure the efficiency of services provided to support core business activities. Key responsibilities include maintaining and restocking office and laboratory supplies, supervising office moves, allocating equipment, general maintenance of equipment, including sanitation, installation, and preventive maintenance. Also manage maintenance work undertaken by outside vendors i.e. painting, electrical, plumbing, specialized repair, and routine maintenance and calibration activities. Responsibilities also include periodic or special inspection of facility equipment/systems to determine repair work necessary and to confirm equipment operation is within specified parameters. Responsible for PM program under LIMS. Shimadzu, LCMS,ICPMS.HPLC,MS systems are inspected and repaired according to predictive maintenance program.

Responsibility also includes acting EH&S (safety) and OSHA compliance coordinator, in tandem with Steep hill Safety Officer and designated vendor. Maintain vendor relationships, implement and review facilities related SOPs, maintain conference rooms, aid with telecommunications and IT equipment as well as provide administrative support as required.

Key Responsibilities

• Oversee the operation and maintenance of lab equipment, office buildings and facilities

• Respond to facility requests in a timely manner

• Provides assistance with telecommunications and IT equipment

• Coordinates domestic and international shipping and receiving via UPS, DHL and FedEx

• Perform facility inspections, identify hazards and remediation

• Purchase laboratory and office supplies and maintain or restock inventories

• Schedule safety trainings, and ensure EH&S and OSHA compliance

• Implement and review facilities related SOPs

• Support scientific and operations staff with general documentation needs

• Maintain conference rooms, and ensure cleanliness of premise and safety of all building facilities

• Vendor management, negotiate the renewal of equipment warranties and service agreements

•• Provide administrative support and assistance with special projects as required

TRADEX GmbH San Francisco, CA Oct 2017 – Feb 2017 Senior Project Manager/ Sr. Facilities manager Responsibilities: • Coordinate internal resources and third parties/vendors for the flawless execution of projects • Ensure that all projects are delivered on-time, within scope and within budget • Developing project scopes and objectives, involving all relevant stakeholders and ensuring technical feasibility • Asset management project including HVAC, BMS project and complete reconstruction of building alarm system and manufacturing machines both electrical mechanical upgrade • Integrated parts program into Maximo • Ensure resource availability and allocation • Develop a detailed project plan to track progress • Use appropriate verification techniques to manage changes in project scope, schedule and costs • Measure project performance using appropriate systems, tools and techniques • Report and escalate to management as needed • Manage the relationship with the client and all stakeholders • Perform risk management to minimize project risks • Establish and maintain relationships with third parties/vendors • Create and maintain comprehensive project documentation

Sonoma County Library, Santa Rosa California July 2016-Feb 2017 Facilities Manager Responsibilities: • Managing all library facility maintenance activities and capital expenditure projects. • Managed fifteen library locations in Sonoma County. • Met with architects, interior designers, contractors, building inspectors and ensured buildings were in compliance with city, state and federal rules Created CMMS program to get the department away from paper preventative maintenance program. Managed janitorial staff and security of the facility. • Maintained and completed a 400k capital expenditure facility refresh in January 2017.

Bay Area Air Quality Management District, San Francisco, CA Nov 2013 - June 2016 Facilities Supervisor/Facilities Analysis Responsibilities: • Manage housekeeping, security and facilities maintenance staff. Maintained budget by using JD. • Edwards’s software to write requisitions, requesting purchase orders, and generate request for proposals. • Managed outside contractors for HVAC, plumbing, electrical, construction, elevators inspection/repair. Responsible for all building inspections and compliance standards. • Maintained building utilities including Elevators, backflow preventers and hazardous waste disposal compliance.

• Monitored CCTV cameras and security issues and concerns. • Worked with the City government to ensure all permits and regulations are up to date and stay in compliance. Scheduled repairs to building or equipment as necessary.

Georgia Pacific, Antioch California Nov 2012 - Nov 2013 Electrical maintenance Supervisor Responsibilities: • Managed the electrical department by utilizing SAP software for facilities and material management. • Responsible for all electrical upgrades to the milling departments and sheetrock line. • Made recommendations for OSHA safety standards and electrical safety. • Worked with maintenance planners to keep electrical parts and motors essential to the mission in stock, and saved money by

returning nonessential items to the manufacturer. • Increased machine line reliability and decreased down time. • Managed a staff of three in the department.

American Imports Inc, Tracy, CA Oct 2012 - Nov 3 2012 Building Service Manager Responsibilities: • Primary duties include managing building service department of American imports. • Monitor building for cleanliness and proper Hvac climate environment. • Dispatching service engineers to repair various problems in the building or outside. • Used SAP software to manage the facility maintenance department. Maintained building appearance by managing painting contractors and landscaping. • Managed outside contractors for Hvac, plumbing, electrical, construction, elevators inspection/repair. • Responsible for all building inspections and compliance standards.

• Maintained building utilities including Hvac and boiler compliance.

Bio-Rad Laboratories, Hercules, CA Sept 2011 - Oct 2012 Maintenance Contractor Responsibilities: • Used SAP to manage and plan work in the facility department. • Primary duties include PM maintenance of the Kalishe CNC/PLC bottle filling line. • Maintain equipment in run ready status. • Maintain and correct routine problems on the production line and Maintain Hvac, Chillers, Troubleshoot electrical electronic problems in building and on equipment. Impax Labs, Hayward, CA Sept 2008 - May 2011 Maintenance Manager Responsibilities • Manage the facility at building 5. Managed contractors on site, write purchase requisitions, Capital appropriation request and help keep the facility on budget. • Worked with maintenance tracking systems such as PRMS, EAM, and SAP. • Machines I have written pm, tracked performance or scheduled service on Glatt fluid bed granulators, Manesty tablet presses, Korsch tabletors, Zanasi, Encapsulators, Ima matic 90, encapsulations, Uni-press, and Stokes press. Ensured the readiness of pad mechanical equipment such as 3 chillers (Trane units) 2 Atlas Copco 500hp compressors, various hot water and steam boilers.

Kraftfoods, Atlanta, GA Oct 2004 - Oct 2008 Maintenance Supervisor Responsibilities: • Oversee the daily activities of the Kraft facility. Assist maintenance associates in daily tasks such as repairing building production equipment. • Machining the parts to specification and holding tight tolerances was part of my QC incentives implemented at Kraft.

• Additional responsibilities included boilers, compressors up to 700hp, chiller, HVAC system inspections, waste water treatment Preventative maintenance program, Work order definitions and closeouts, breakdowns. Recognize defective equipment, generate work orders. • Tools include SAP, Mims, and As400. • Troubleshoot equipment using Foxboro and Allen Bradley panel view.

Stiles Machinery, Grand Rapids, MI Dec 1997 - Oct 2004 Project Manager Responsibilities: • Project Manager working in the Field installing CNC machine lines and material handling equipment. • My department duties in the technical sales department included managing multi- million dollar projects at various customers’ sites. • I assisted with the construction and planning of new facility, power and air requirements to OSHA standards. Responsible for the installation of equipment and managing field

service technicians. • Worked in conjunction with international shipping companies which brought containers of equipment to the facilities. • I would estimate time lines, project and forecast completion dates. • I supervised both American and foreign personnel and used Microsoft project to predict time lines.

Coca-Cola Bottling, Grand Rapids, MI Apr 1997 - Dec 1997 Maintenance Supervisor/Production Responsibilities: • Supervise maintenance associates in daily tasks, Pm, breakdowns. Schedule production, and oversee that the product is meeting schedule. • Order parts update pm programs, in charge of the facility at night including transportation. L&W Engineering, Holland, MI Oct 1996 - Apr 1997 Maintenance Team Leader Responsibilities: • Supervised third shift maintenance and pm programs.

• Insure all machines are running and the preventative maintenance is performed correctly. • Responsible for maintenance and repair of Bliss, Verson presses, Motorman robots, Fanuc robots, Yashmak drives.

JWI, Holland, MI Oct 1994 – Oct 1996 Maintenance Group leader Responsibilities: • In charge of Maintenance, and Janitorial personnel • Responsibilities included ordering parts, meeting with contractors, Keeping track of computerized Pm • Maintenance of all CNC equipment including CNC Leblond Lathe, Cincinnati Gilbert, Kearny and Tracker Moduline, Lucas, G&L, Campbell Router, Demag overhead 50 to 5 ton bridge cranes, Esab, Ltec CNC plasma cutting table, and Joy air compressors 30 to100hp. • In charge of JWI truck fleet maintenance and PM, also understand M codes, G codes, and machine parameters.

Coca-Cola Foods, Red arrow Hwy. Paw Paw, MI June 1989 - Oct 1994 Maintenance Mechanic/ Fill in lead man Responsibilities: • Filled in as maintenance lead man when an individual was sick or on vacation. • Provided maintenance to all Tetra pack equipment, Fillers, Straw applicators ECT. • Worked with Allen Bradley Slc500, two/20, Omron, and family five processors. • Worked on robotic Palletizer with Crusaders PMC controls, and rotary encoders. • Fixed pumps, flow meter.

Baron Blakeslee June 1988 - June 1989

Quality control tester Responsibilities: • Tested and audited Defluxion equipment. • Insured that he equipment we shipped was of the highest quality. • Worked with refrigerates, Omron PLC, Pneumatic valves, and digital equipment.

Gardena Aug 1986 - June 1988 Maintenance Man/Field Service Tech Responsibilities: • Repaired pneumatic machinery, Hydraulic, and electrical packaging machinery. • Worked on Siemens controllers, and Mannesmann Demag Robotic Palletizer warehouse system. • Duties also included the service and repair of various CNC equipment in the facility.

Becker International May 1985 - Aug 1986 Model maker Responsibilities: • Assembled electrical and mechanical parts for prototype CNC machinery. • Operated and repaired NC milling machine and lathe. • Built clamping devices, Jigs, fixtures for CNC machining centers for BMW, and Mercedes. Wired Electrical panels.

U .S. Army Apr 1981 - Apr 1984 Pershing Missile Operator and maintenance Technician • Performed PMCS on all equipment, and maintained them in alert readiness! Installed programs and targeting data in the power test station, and fired six missiles. • Completed preventive maintenance on three launchers, one PTS, SLA, ARU, turbine generator, 45kw, and 10kw generators. Responsible for all repairs, and condition of equipment.

a. Journeyman cards/AIW/UPIU

b. Industrial machine repair/AIW/UPIU

c. Industrial electrician/AIW

d. Tool & Die maker/AIW

e. Toolmaker/AIW

Contact this candidate