Timothy J. Hyduk

American Society for Quality; Member since 1999

Certified Quality Auditor / Quality Technician - Six Sigma Green Belt

Work History

Gotta Groove Records

Aug 2021 – Aug 2022

Global Record Album Supplier

Quality Technician

Receiving, Shipping, In Process & Final Inspection of Product

Aviation Component Solutions

Aug 2018 – April 2020

Global Aviation PMA & OEM Component Supplier

Quality Engineering Specialist

Receiving, Shipping & Final Inspection of Product

Certification approval, Documentation storage and Product Stocking Responsibilities

Internal Audit Responsibilities

Gage Calibration, Maintenance and Recall

OEM Inspections and Reverse Engineering of Aircraft Components

First Article PMA Inspection and approval

CMM inspections of Components

Corrective and Preventive action responsibilities

Cleveland Track Material

November 2017 – June 2018

Global Manufacturer of Rail Products for the Railroad Industry

Quality Technician (Contractor)

Receiving, In-Process & Final Inspection of Product

Gage Calibration and Recall

Process identification and improvement

ISIR Inspections

Work Instructions / Procedure creation

INVACARE CORP.

November 2015 – January 2017

$1.5B Manufacturer of Wheelchairs, Beds, Oxygen Concentrators, Lifting Devices, etc. For the Medical Device Industry.

Process Engineer (Contractor)

PFMEA creation for the new TDXSP2 Powered Wheelchair Launch.

Remediation of TDXSP,3GTQ3 and the 3GTQ powered wheelchairs

PPAP Submissions / Process identification and improvement

PPAP Inspections / IQOQ verifications

Work Instructions / Production Ware creation / KAISEN Events

PARAMOUNT STAMPING and WELDING

April 2015 – September 2015

$8M Manufacturer of Stamped, Welded and Wire-formed Products for the Automotive, Construction and Appliance Industries.

Quality Manager (Contract)

Responsible for all PPAP submissions and Engineering updates.

Attained Retention of ISO 9001:2008 Recertification

Customer Contact for Product Issues, Corrective / Preventive Action Administrator.

ISO / QMS Management Representative – Internal Audit Coordinator.

Managed Quality Engineer for daily inspections and approvals / Gage Design and MSA

Continual Improvement Administrator / Management Review Coordinator

MIDWEST CURTAINWALLS INC. Cleveland, Ohio

June 2014-May 2015

$12M Manufacturer of Misc. Structural Materials / Manufacturing Metal Doors/Sashes/Trims / Curtainwall Systems for the outer coverings of a buildings

Quality Assurance Technician (Contractor)

First Piece Set-Up Approval, In-Process Floor Inspection and Dock Audits.

Review and Confirm Manufacturing Drawings to Parts and Assemblies.

Review and Confirm Architectural Drawings to Finished Units and Assemblies.

Raw Material & Finished Component Receiving Inspection.

Purchased Component Verification and Testing.

1 & 2 Part Silicone Testing and Performance Inspection.

In-Process Inspection of the Framing, Insulating and Glazing of Units.

Final Inspection of Curtainwall Units before Crating & Shipment to Job Site.

INTERSTATE McBEE LLC-, Cleveland, Ohio

March 2012 -March 2014

ISO 9001: 2008 Certified $80M OEM and Aftermarket Manufacturer/ Distributor of Fuel Injection & Engine components for the heavy duty diesel engine market.

Quality Engineer

In charge of all Gage Calibration, Issue and Recall using GageTrak software system.

Assistant Document Control Administrator / ISO Administrator, Contact and Escort.

Conducted Pre-Assessment Audits and issued Corrective Action for FLA. & CA. Facilities, which led to their attainment of ISO 9001: 2008 certifications.

Created, Conducted, Reviewed, and filed Internal Audits.

Closed Corrective Actions and Preventive Actions, issued from Third Party ISO Surveillance Audits.

First Piece Set-Up Approval, In-Process Floor Inspection and Dock Audits.

Rockwell Hardness Testing and MicroVal Micro Hardness Testing

Raw Material & Finished Component Receiving Inspection.

SCAR & RGA Administration.

Creation and updating of, Control Plans, SPC Sheets, Flow, and PFMEA.

Performed PPAPs (ISIR’s) and layout inspections of QEM parts for aftermarket releases.

Conducted Lift Truck training sessions and safety examinations for 4901 facility.

Reviewed and approved all prints for entry into SB Client Management System.

Performed Product Approval and Inventory Management in SB Client.

SOUNDWICH INC., Cleveland, Ohio

July 2009 -August 2011

ISO/TS 16949: 2009 ANSI/ISO E14001: 2004 certified $20M manufacturer of heat shields, acoustical and vibration dampening materials and metal stampings used in the automotive, off-road and recreational vehicle industries.

Quality Manager

Managed a staff of five (5) Quality Engineers and Technicians

In charge of the Quality Department for the Wayside and St. Clair facilities including all internal and external quality functions.

Handled all Customer Complaints, RMA's, NCMR's, NCTs, Corrective Actions and Third Party Sorting.

APQP Manager in charge of all PPAP functions

Responsible for Annual Quality Budget and Quarterly Corporate Board Meeting Presentations

Responsible for Quarterly Management Review Presentations

Frequently visited Customer Locations in Michigan, Illinois and Indiana for Quality Issues and Supplier Support

Internal Audit Manager and Internal Auditor Trainer for Wayside, St. Clair and Sidney, Ohio facilities

EMS Safety Team Member

Quality Engineer: Promoted to Quality Manager – June 2010

Environmental Management System Audits and Internal Auditor Training of New Sister Company prior to its Certification to the ANSI/ISO/ASQ E14001-2004 Standard.

Performed PPAPs, layout inspection, final audits, gage calibration and recall.

Annual Product and Material validations - Maintaining gages in the calibration/validation system.

Member of the APQP Teams on New Product Development and Product Revision.

Worked on and Closed Customer Complaints and Corrective / Preventive Actions.

ISO 9001:2009/TS16949 & ANSI/ISO/ASQ E14001-2004 Internal Auditor.

Operation and maintaining B&S MicroVal 454 CMM using PCDMIS++CAD software.

Conducted Process Capability Studies and Gage R&Rs.

Destructive and Non-Destructive Testing including: Weld Analysis, Pierced Nut Torque Testing, Force Gage Pull Testing, Moisture Analysis, Heat Loss and Polymer Expansion.

First Piece Set-Up Approval, In-Process Floor Inspection and Dock Audits.

Raw Material Receiving Inspection including: Aluminium and Steel Coil Acceptance, Hardness Testing, Melt Point, Flow and Polymer Expansion.

PRESRITE CORPORATION BESSEMER DIVISION, Cleveland, Ohio

September 2002 - February 2009

ISO9001: 2000 certified $90M manufacturer of forged tooth gears, used in the earth moving, mining, off-road, railroad, petroleum, motorcycle, aerospace and heavy equipment industries.

October 10th, 2007 Promoted to Maintenance Coordinator/MRO Purchaser to the Bessemer Facility

In charge the MRO purchasing (maintenance, repair and operations) for the Bessemer Division in the Maintenance Department.

Ran, stocked and managed the Maintenance Tool Crib.

Coordinated, managed and validated work by Outside Contractors for payment via the corporate electronic purchasing system.

Purchased Parts and Materials, via the corporate electronic purchasing system, by using the internet, phone contacts, vendor contacts and other resources to acquire the best supplies at competitive prices in a timely manner.

Maintained the machines, facilities, building grounds and plant operations using employee directed repairs and outside contractors.

Contacted, scheduled and arranged for the payment. Machine and Facility repair and needs of the employees by supplying PPE, Safety equipment, safety clothing etc. the Facilities Maintenance and repair suppliers.

January 5th, 2004 Promoted to Quality Coordinator to the Bessemer Facility

Lead Internal Auditor / Internal Audit Recorder / Scheduler.

Document Control Administrator / ISO Administrator, Contact and Escort.

Six Sigma Green Belt / Six Sigma Projects /Lean Event Team Member

Responsible for Production Scorecards and Efficiency Reporting at Corporate Level.

Created, Conducted, Reviewed, and filed Internal Audits for division.

Closed Corrective Actions and Preventive Actions, issued from Third Party ISO Surveillance Audits.

In charge of all scrap collection, disposal and divisional scrap dollars reporting.

In charge of producing, writing and/or filming Work Instructions and Training material.

Was in charge of teams on trips to a number of Customers facilities to inspect, sort and investigate problems with product and processes.

In charge of ISO Quality System conversion from the QS Standard.

Layout Technician

Duties included: dimensional inspection with a Zeiss UMM 550, and Mitutoyo BRT 910 CMM’s. Set up, in-process & final inspection, using plate layout, profilometers, gage scopes, Rockwell and Brinell hardness testers and CMMs.

Performed PPAPs (ISIRs), layout inspection, final audits, gage calibration and recall.

Internal Auditor - SPC Data collection and analysis Creation and updating of, Control Plans, SPC Sheets, Flow, and FMEAs.

Non-Destructive Testing using Magna-Flux Inspection.

Maintaining gages in the GAGEtrak system - Conducting Process Capability Studies and Gage R&Rs.

Education/Training

Graduated: North Olmsted High School, North Olmsted, Ohio

Subjects Studied: Art, Graphic Arts, English, Chemistry, and Mathematics.

Ohio University, Athens, Ohio

Subjects Studied: Advertising / Fine Arts Major

Parma High School / Ford Motor Co. sponsored vocational training (3 semesters)

Subjects Studied: Math (Geometry, Algebra, Trig.), Drafting, Tool Making, and Die Design.

Completed: Certified Quality Technician Refresher

Course, Applied Technologies Institute, Cleveland, Ohio.

Passed: American Society for Quality

Certified Quality Technician Exam, Cleveland, Ohio. Section 0800

Graduated: Fundamentals of Internal Auditing

Dreison International, Cleveland, Ohio

Completed: Inspection Engineering, Carl Zeiss Certified U-Soft Basic Training. Great Lakes Tooling Inc., Cleveland, Ohio

Completed: Plexus ISO/Q.S. 9000 Internal Auditor Training Course, Cuyahoga Community College, Cleveland, Ohio

Completed: Cintas F.A.S. Medic First Aid Training Program, Certified CPR, Automated

External Defibrillator, and First Aid Provider, Presrite F.T.G. Cleveland, Ohio

Completed: SRI ISO/TS16949: 2002 Internal Auditing Training Course, Courtyard Marriott, Westlake, Ohio

Completed: Fred Pryor Seminars, Intermediate Microsoft Excel Training Course

Clarion Hotel, Middleburg Hts., Ohio

Completed: Certified Quality Auditor Refresher Course,

Cuyahoga Community College Eastern Campus, Beachwood, Ohio

Passed: American Society for Quality

Certified Quality Auditor Exam, Cleveland, Ohio. Section 2900

Completed: SRI / ISO 9001: 2000 Standard Documentation, Interpretation and Implementation Training. Hampton Inn (Airport) Nashville, Tenn.

Completed: SRI / ISO 9001: 2000 Process Auditing Techniques Course, Presrite Corporation Cleveland, Ohio

Completed: Chrysler Supplier Training, Chrysler Technical Center, Auburn Hills, MI.

Completed: Cybermetrics GageTrak Software Training, Knowledge Services, Dublin, Ohio.

Completed: Ridenour / ISO 9001: 2008 Process Auditing Techniques Course, I.D.S. Cleveland, Ohio

Contact this candidate