Carlton D. Hamilton

*** ********* ****

Sneads Ferry, North Carolina 285460

612-***-**** cell

adxzcf@r.postjobfree.com

Work Experience

Amalie Arena Security

Event security

*** *********** *r, Tampa, FL 33602

March 2015 to 2018

I am a security guard for special events, concerts, NHL Hockey and any event scheduled for a crowd capacity of 20,000 or,or more. As a team member of the Security staff at Amalie arena I am also tasked with outside venues at the University of Central Florida as well.

Lowe's Home Improvement

Plumbing Professional

Store 2639 Oldsmar, FL

March 2016 to August 2017

As a plumbing professional. I am required to meet all the customers’ needs in providing them with the right parts and direction in resolving their rough plumbing requirements. I am also required by Lowes to maintain a high salesman standard and provide excellent product and customer care.

Senior Metrology Equipment Technician

NSTAR Global Staffing

Garner, NC

December 2015 to Present

As a senior metrology equipment technician, I was responsible for maintaining several wafer fabrication and inspection tool sets such as Hitachi CD and analytical SEM’s, Jeol, Zeiss, Nikon, Zygo, KLA Tencor, Rudolph AIt’s,Metapulse and MPG . I was also very instrumental in repair and improvement of the operation and expected performance of these pieces of equipment as well.

Independent Contractor

Horus Tech

Milpitas California

May 2014 to Present

Troubleshoot, fault isolate and repair various CD-Sem’s and AIT inspection tools for resale worldwide, to wafer manufacturing companies and independent outsourced companies. Perform installation at the companies’ sites and bring the installed equipment up to product specification. My job responsibilities also included training personnel on proper maintenance procedures and troubleshooting principals.

Independent Contractor

Self Employed. Computer sales service and repair. Semiconductor Equipment Consultation

Cameron WI

January 2013 to Present

Performed a variety of odd jobs from computer service sales and repair. Performed consultation to smaller wafer manufacturing companies on equipment repair and cost estimation. Also purchased several items for resale in our family home and office furnishing business.

Optical Engineer

Rudolph Technologies

Bloomington, MN

May 2012 to January 2013

Build from the frame up, a variety of Metapulse tools. Install align and calibrate laser and optics associated with the various tool sets. I achieved certification using class 4 lasers as well as qualification in maintenance installation and repair of the MPG tool sets. I also am qualified to install repair and maintain the AIT equipment group.

Security

Target Center

Minneapolis, MN

May 2012 to January 2014

Our objective was to provide a secure and safe environment for our clients and there guest. I regularly performed task in conjunction and compliance with regulations set forth by the event arena and their host. We hosted several NBA, WNBA and Concerts.

Metrology Equipment Technician

Triquint Semiconductor

Apopka, FL

January 2011 to March 2012

As one of two Metrology department personnel I was responsible for implementing maintaining and repairing various types of Metrology equipment on several different platforms using a variety of windows and UNIX software. I was also responsible for the company 5 S program and LOTO program. My responsible included but was not limited to training as well as equipment upgrades and maintenance

Metrology Equipment Technician

Samsung Austin Semiconductor

Austin TX

March 2008 to October 2010

Fault isolate, repair and install CD-Sems, Spectrum Analyzer, Analytical-SEMs, AIT’s and a variety of thickness and concentration tools. I troubleshoot key technical issues to the component level and use routine process data and on site data logging functions to diagnose down systems. My job responsibilities also included diagnosing and resolving hardware and software issues. I was responsible for resolving sustaining process issues with assistance from application engineering and tool vendors. I performed complex retrofits and was called upon on several occasion to organize and lead retrofit activities. My duties as a level three technician were to identify and correct procedural issues. I also was responsible for and created methodologies and procedures as necessary for the most effective and efficient use of metrological processing equipment. I prided myself on anticipating and responding to fab issues including communicating with departmental supervisors and upper management throughout our organization and in other locations. I participated in departmental meetings and escalations. I have been institutional in initiating projects to drive down costs or increase uptime as part of the company’s lean program. I achieved my white belt status with the company’s six sigma certification program. I assisted facility engineering in performing room surveys for vibration noise and RF interferences. I performed operating system upgrades to Windows 98, 2000, XP and UNIX. I also am responsible for final check offs prior to turning equipment over to the engineering operators assuring that all specification were well within operable tolerances. Our team networked communications via LAN and modem connections to other scientific instruments locally and worldwide. The main platforms for performing my duties were class 1 and class 1000 clean rooms in silicon wafer manufacturing environment.

Metrology Maintenance Technician

Nstar Global Services

Austin, TX

August 2007 to March 2008

I was hired by Nstar Global staffing on a temporary hire with the possibility for permanent hire if my skill set matched what Samsung was looking for. After six months of temporary employment at Samsung Austin semiconductor, I was hired as a full time employee

Heavy equipment Operator/Mechanic

Seneca Foods

Cumberland WI

March 2007 to August 2008

Operate and maintain heavy field operating equipment while harvesting yielded products for plant processing.

Abrasive Production Line Technician

3M Corporation,

Cumberland, WI

August 2005 to June 2007

Operate and maintain a variety of abrasive producing and manufacturing machinery as well as assisting in packaging and distribution of finished products worldwide.

Field Service Technician Level 2,

Hitachi High Technologies America

Pleasanton, Ca

January 2000 to June 2005

Fault isolate, repair and install CD-Sems, Spectrum Analyzer, Analytical-SEMs TEMs and FIBs. Perform room surveys for vibration noise and RF interferences. Performs operating system upgrades to Windows 98, 2000, XP and UNIX. I also was responsible for final check offs prior to turning equipment over to the customer assuring that all specification are well within operable tolerances. Our team networked communications via LAN wireless Ethernet and modem connections to other scientific instruments locally and worldwide. The main platforms for performing my duties was class 1 clean rooms in silicon wafer manufacturing facilities to research and discoveries laboratories located at the San Francisco Museum of Science and Natural History. I also aided in providing technical feedback to our tool design engineers, evaluated and provided real time training for customers as well as new employees of Hitachi's Field Service team. As lead engineer, I provided constant feedback to customers while maintaining a 95 percent weekly uptime average and kept all equipment within specified allowable tolerances. I kept all upgrades and certifications up to date and maintained an around the clock service availability for customers equipment while addressing any of their service needs.

U.S. Coast Guard Fire Control Technician

September1986 to December 1999

United States Coast Guard

Fault isolate and repair the ships radar system, armament guidance systems as well as the platform mounted Phalanx gun systems aboard U. S. Coast Guard Long range patrol ships. My duties also included assisting with any technical assistance concerning electronic troubleshooting and repair, audio visual installation and validation. I also assisted in linking ship to shore hard line connections that included telephone communications, dockside electrical connections, ships internal and external loudspeaker systems and ships video surveillance system when deployed for Maritime Law Enforcement. I was required and still hold current a NSA/NTSC Secret security clearance which was required for my performance of my DOT duties.

Education/Awards

US Naval Institute of Electronic Theory and Weapons Guidance, Great Lakes, Ill; 9/1989 - 11/1990

Associate Degree Equivalent

U.S. Coast Guards electronics advanced system technologies at Yorktown VA.; 11/1990 -11/1992

Advanced Electronics Degree

U.S. Naval Warfare Training Institute at San Diego; 7/1994 - 5/1996

Advanced Analog/Digital Theory Certificate

Hitachi High Technologies America; 3/2000 - 9/2000

Certificate of Completion for Electron Microscopy

Certificate of Completion for Critical Dimension Scanning Electron Microscopy

Certificate of Completion for Advanced Critical Dimension Scanning Electron Microscopy

Decorations, Medals & Awards

Coast Guard Achievement Medal

Coast Guard Unit Commendation

Meritorious Team Commendation

National Defense Service Medal

Humanitarian Service Medal

Good Conduct Awards; (3 consecutive. Awarded every three years.)

Secretary of Outstanding Unit Award

Army Commendation

Coast Guard Sea Service Award

Coast Guard Ceremonial Honors Detail; (Burials @ Sea)

Emergency Medical Technician Recertification

Ship Board Heath Service Technician Assistant

Contact this candidate