MOHAMMED YASIN ABED ATTUN
Mob: +962-********* (Jordan)
Email: adxvc2@r.postjobfree.com/adxvc2@r.postjobfree.com
skype: mohammed.attun1
WORK EXPERIENCE/S
POSITION: SENIOR Electrical Engineer (June 2019 up to Jdec 2022
ORGANIZATION: WSP Owner’s Engineer Renewable Energy project
Hashemite Kingdom of Jordan Tafila Governorate
PROJECT: ABOUR WIND FARM
The Employer: ABOUR Wind Power PSC
The Contractor: Vestas Middle East S.L.U. •
Responsibilities:
(30) WTG model V136 with a Hub Height of 112m and 3,45MW, Total capacity power for the wind farm will be 100. MW
•Responsible for reviewing/approving shop drawings & material submittals related electrical works.
Experience in the review of Electrical engineering documentation
•Works supervision under FIDIC Contract
Monitor Contractor and Sub-Contractors' performance and ensure compliance with client’s design philosophies and specifications
•Site supervision to observe the progress of works on site
•Supervising for electrical equipment approval, delivery, installation, testing & commissioning at abour wind farm project 51.75 MW.
.To provide technical support to site in terms of material inspection, retrofitting, conditioning assessment of electrical equipment, like MV/LV Motors, Generation System, Power Distribution,Transformers, Switchgears, MCC, AC/DC UPS, VSD, Battery Charger, and Overhead line Power Management System, Protection System, Earthing & Lightening System, Lighting System .,witness Site Acceptance & Factory Acceptance Testing, etc.
•Provide guidance, managerial, technical support to complete project team.
•Provide the technical assistance and resolution when the engineering problems encountered.
•Coordination with Client for technical and site works.
Provides guidance, managerial, technical support to complete project team.
-Monitor progress in the implementation and results of the project against the strategic objectives and indicators as well as promote and support quality assurance of all project interventions.
Engineering support of vendor representative activities on site
Direct and coordinate construction, installation, maintenance, and testing & commissioning activities to ensure compliance with specifications, codes, drawings and customer requirements.
Knowledge of health and safety issues related to work at Site
Position: International Electro-mechanical Engineer (September 2016 upto December 2018)
Organization: UNDP Service Center, Erbil
Project: United Nations Development Programme Iraq
Responsibilities:
Responsible for reviewing/approving shop drawings & material submittals related electrical works.
Preparing Tender Documents (BOQ specifications & dwgs) for relocating existing utilities for all project.
Reviewing/evaluating the contractor's proposals and forwarding recommendation to the Client.
Arranging / attending meeting between the authorities the Client, the Project Management in order to resolve the pending issues, and taking the necessary actions after wards.
Coordination between all parties in order to avoid any obstacles that might delay the project
Provide the technical assistance and resolution when the engineering problems encountered.
Strong knowledge of standards and norms in Electro-Mechanical Works
Review and coordinate multi-discipline drawings and documents to ensure that adequate provisions have been made for Electrical Systems and mechanical system.
Modification of BOQs
Technical evaluation for bidder before Awarding to contract
Rehabilitation of projects in a short period such as schools, health center, water treatment/supply stations, hospitals, Roads and transmission power lines
Providing M&E technical input and advice as required for live projects, Active working knowledge of M&E works
Renewable Energy Field (Solar Energy) schools, health center water treatment projects, & Street lightings.
Provide guidance, managerial, technical support to complete project team.
Managing project risks, including the development of contingency plans
Follow up the implementation of project from A-Z
Position: Senior Electrical Engineer (January 2014 - August 2016)
Organization: Khatib & Alami (K&A), Offshore S.A.L
Multi-disciplinary Architectural & Engineering Consulting Company
Project: Water Supply Improvement Project in Kurdistan Iraq
Client: Kurdistan Regional Government (KRG) - Iraq
Ministry of Municipality & Tourism, General Directorate for Water & Sewerage
Cont; No./Amount: IQ PII / $199,744,407.00 The project is funded by JICA
Responsibilities:
Responsible for reviewing / approving the shop drawings and material submittals related to the electrical works, the project fully control by Scada system {Schneider}
Conduct site inspection for quality control on site prior to installation and report finding and/or make recommendation.
Works supervision under Yellow FIDIC Contract
Understand the technical drawings, Bill of Quantities (BoQs), technical specifications and ensure the work meets project contractual expectations, deliverables, quality standards, schedule, costs and scope.
Direct and coordinate construction, installation, maintenance, and testing & commissioning activities to ensure compliance with specifications, codes, drawings and customer requirements.
Reviewing/evaluating the contractor's proposals and forwarding recommendation to the Client.
Arranging / attending meeting between the authorities the Client, the project management in order to resolve the pending issues, and taking the necessary actions after wards.
Site coordination between all parties in order to avoid any obstacles that might delay the project
Provide the technical assistance and resolution when the engineering problems encountered.
Supervision of Electro-Mechanical Equipment’s installation & testing in water treatment plants
is in charge for checking and supervision of the electrical installation works, from approval of submitted material, delivery of equipment’s on site, checking of supporting documents, until tests on completion, commissioning and tests after completion, also responsible for the checking and approval of the as-built documents, the operation and maintenance manuals and the supervision of the training provided by the Process Designer for the operational staff.
In addition, I was appointed to keep records for Quality Assurance & Quality Control of works and plant.
I was in charge for health & safety measures and inspections on a construction site.
Position: Senior Electrical Engineer (January 2012 to October 2013)
Organization: Associated Consulting Engineers Int’l Jordan
In Association with: Regional Bureau for Designs and Consultations
Project: Wasit Water Treatment Plant - IRAQ-WASIT
South of Iraq Main Office Amman – Jordan The project is funded by the World Bank
Responsibilities:
Working in Wasit Water Treatment Project1200 M3 / hour
Responsible for reviewing / approving the shop drawings and material submittals related to the electrical works and the project fully control by Scada system{ABB}
Conduct site inspection for quality control on site prior to installation and report finding and/or make recommendation.
The Contract type used is a yellow book FIDIC type Contract
Works supervision for Yellow FIDIC Contract
Site supervision to observe the progress of works on site.
Preparing the tender documents (BOQ specifications and drawings) for relocating existing utilities at site.
Reviewing/evaluating the contractor's proposals and forwarding recommendation to the Client.
Arranging / attending meeting between the authorities the Client, the project management in order to resolve the pending issues, and taking the necessary actions after wards.
To provide technical support to site in terms of material inspection, retrofitting, conditioning assessment of electrical equipment, like MV/LV Motors, Transformers, Switchgears, MCC, AC/DC UPS; witness Site Acceptance & Factory Acceptance Testing, etc.
Site coordination between all parties in order to avoid any obstacles that might delay the project
Provide the technical assistance and resolution when the engineering problems encountered
Supervising for electrical equipment approval, delivery, installation, testing & commissioning at Waste Water Treatment
Position: Senior Electrical Engineer (October 2010 to December 2011)
Organization: TRAMEC, Trans Mediterranean Contracting Company
Project: Sahara Project Tobacco Factory, Amman - Jordan
Responsibilities:
• Preparing the tender documents (BOQ specifications and drawings) for relocating existing utilities at site.
Senior electrical engineer responsible for installation and delivery of Electrical package power distribution system, lighting system, telecommunication system, fire alarm system and other building related Electrical Systems such as, CCTV, Access Central System, Central battery system, Guard System& Street lightings
Responsible for performance and mentoring site management of all electrical work at site.
Responsible of materials and equipment submittal, shop drawing and as built drawing
Direct and coordinate construction, installation, maintenance, and testing & commissioning activities to ensure compliance with specifications, codes, drawings and customer requirements.
Position: Project Manager MEP / Senior Electrical Engineer (October 2007 to September 2010)
Organization: Ramco Trading & Contracting Company
MEP Division, State of Qatar
Project: Commercial Residential Building - Al Mirqab Tower
Ministry of Finance - Renovation and Expansion Building
Responsibilitie:
To promote safe behaviour at all times a carry out all electrical engineering activitiesnd
Project Manager (MEP) position is fully responsible to successfully manage, execute, complete and handover multiple MEP projects related to infrastructure projects.
Managing the works of all Electrical Engineers and Delegation of Works, Power, Lighting, LV, ELV, Central Battery, Fire and Voice Alarm System, CCTV, Access control, SMA TV, Telephone and Data, Farash Call, Master Clock, Public Address, Intercom, Gate Barrier. FM 200, UPS, BMS, Lightning Protection &Street lightings.
Responsible for site engineers and supervisors for good quality of works
Supervising all the works at site, HVAC, Plumbing, Drainage, Fire Fighting & Electrical Systems.
Providing M&E technical input and advice as required for live projects, Active working knowledge of M&E works, Take responsibility for and manage the on-site installation and commissioning of all M&E activities.
Coordination with Consultants for technical and site works, installation, maintenance, and testing & commissioning activities to ensure compliance with specifications, codes, drawings and customer requirements.
Preparation of Weekly and Monthly Reports
Reviews Material Submittals of all Sub Contractors
preparing required reports and other documents.,
Position: Project Manager MEP (October 2007 to September 2010)
Organization: Ramco Trading & Contracting Company, MEP Division, State of Qatar
Project: Africa Tower, 5 Star Hotel, 19 floors, Tripoli - Libya, Zouara Hotel - 5 Star Hotel, Zouara - Libya
Responsibilities:
Managing the works of all Electrical Engineers and delegation of works
Experience in LV, MV and HV networks-
Experience in MEP- Electrical installations for building project
Experience in earthing system, lighting system, conducting, cable laying, cable trays, termination & coupling
Have good Knowledge about cables, transformers, generators, electrical panels and other electrical equipment and fixtures
Supervising all the works at site, HVAC, Plumbing, Drainage, Fire Fighting & Electrical Systems.
Lead Position with the preparation and finalization of Mechanical, Electrical, Plumbing, Sprinkler, Fire Alarm and Security - Signed Off Coordinated drawings.
Coordination with Consultants for technical and site works
Manage all field activities with MEP trades including 2 week “look ahead” schedules.
Preparation of Weekly and Monthly Reports
Reviews Material Submittals of all Sub Contractors
Execution of building services as a contractor like power, lighting, MV, LV, cables routing & termination, Earthling, Electrical Panels, control systems, low current implementation, testing & commissioning, etc. capable of supervising detailed engineering works, coordinated shop drawings, technical submittal, liaison with consultants, coordinate with various disciplines and site supervision
To liaise and coordinate with other engineering disciplines for right interfacing and installation of electrical equipment.
Position: Electrical Engineer (April 2005 to August 2007)
Organization: Remco and Verger Del Porte, Dubai, United Arab Emirates
Project: Bin Hendi Tower, 3 Basement + Ground + Mezzanine + 26 Floors, United Arab Emirates
Responsibilities:
Coordinating with Consultants all construction related issues
Supervision of all electrical works at site
Preparation of Monthly and Weekly Progress Report
Reviewing of all submittals from Sub-Contractors
Position: Electrical Engineer maintenance (March 2004 to March 2005)
Organization: AYTB - State of Qatar
Project: Dukhan Petroleum Field/Oil and Gas Project, Qatar
Responsibilities:
Overseas the electrical and instrumentation installation of GTC-109-EPIC for Modification in Dukhan Fields (30 Plant change requests, PCR in 5 plants)
To acquire considerable knowledge of the process and the relevant mechanical, instrument & control and electrical system throughout the plant and apply the same to trouble shoot problems and leads the maintenance team in resolving the issue.
Overseas the replacement of all instrument cables, cable trays and fittings, instrument junction boxes, instrument tubes and fittings for eight (8) Khuff Plants in the Dukhan Fields
Experience in LV, MV and HV networks, earthing system, lighting system, conducting, cable laying, cable trays, termination and coupling
To assess plant needs for spare parts & supplies and generate material requisitions
Supervised maintenance of commercial residential facilities and industrial installations.
Electrical systems, cabling, earthing & lightning protection system,
Position: Electrical Engineer (June 2002 to December 2003)
Organization: Kent Overseas Limited Company
Dead Sea, Jordan
Project: Jordan Bromine Project, Industrial Project, Dead Sea, Jordan
Responsibilities:
Site supervision of electrical power supply low, medium - voltage switchgear, switches transformers, MCC wire and cables, conduits and cable tray and controls for the entire Bromine Chemical Plant
Experience in LV, MV and HV networks
Experience in earthing system, lighting system, conducting, cable laying, cable trays, termination and coupling
Having good Knowledge about cables, transformers, generators, electrical panels and other electrical equipment and fixtures
Review and coordinate multi-discipline drawings and documents to ensure that adequate provisions have been made for Electrical Systems.
Supervise and coordinate with sub-contractors to ensure they have adequate resources to execute their scope of work
Coordinate Testing and Pre-Commissioning activities of ME & C systems
Make recommendations to the Project Site Manager for improving the productivity of personnel working in the project
Overseas the installation, Testing Commissioning of Plant Power & Control Circuits Site supervision of 30 electrical work forces.
Handing over all electrical works to consultant.
Position: Electrical Engineer (January 1999 to March 2002)
Organization: Al- Balawe Company Tabuk
Kingdom of Saudi Arabia
Project: Commercial Building and Villas, Saudi Arabia
Responsibilities:
Supervised maintenance of commercial residential facilities and industrial installations
Responsible for installation, test and commissioning of HV/ LV – distribution system and electrical installation work building types - residential - construction villas
Position: Electrical Maintenance Engineer (March 1998 to December 1998)
Organization: Al-Mawared Company
Madab, Jordan
Responsibilities:
Prepare electrical maintenance schedule for Al-Mawared Chemical Factory
Prepares budget for maintenance and spare parts annual requirements
Position: Electrical Engineer (May 1996 to December 1997)
Organization: Yaldez and Al-Namer Industrial Company
Amman, Jordan
Responsibilities:
Site Supervisor for electrical installation of Yaldez, Industrial Projects.
Electrical systems, cabling, earthing & lightning protection system
PERSONAL DETAILS
Date of Birth : October 18, 1969
Nationality : Jordanian
Civil Status : Married
Languages Spoken : Arabic, English and Tagalog
Microsoft Office (Word, Excel, Outlook)
EDUCATIONAL QUALIFICATION
South Western University - B.Sc. (Electrical Engineering) - Cebu City, Philippines - 1995
Background Information :
Manage Project Superintendents on Construction Activities
Good Interpersonal, Oral and written communications skills
Review submittals and Schedules of Subcontractors.
Ensure subcontractors comply with the design.
Interface with Host Base organizations for coordination of work on Projects.
the Electrical engineer (High rise buildings for offices, CTO’s and Staff residential villas) using International standards and codes.
Detail study of the Scope of tender, drawings, schedule equipment’s, specifications, quantity take off and Preparation of Bill of Quantities for Electrical equipment’s in excel format for lump sum projects as per principles of international codes, measurements, project duration scheduling and submitting to Bidding Department for Bid.
electrical equipment selection sizing and protection (Transformer, generator, motor, Bus duct, Capacitor Bank, UPS, etc). Cable sizing, bus bar, earthing system according to the load analysis and routing, Short Circuit Calculation, voltage drop calculation Installations of all electrical works were carried out as per approved shop drawings ensuring compliance with safety requirements and as per standards.
Coordinate with Mechanical, civil, Architect Engineers, Discuss technical aspects of electrical system with Contractor towards successful completion of project.
LV switchgear substation, Installation of transformers and termination into panel boards.
Installation of Electrical Installation (Internal + External) - Addressable Fire Alarm system, Security (CCTV and Access control), Public Address, Internal & External Decorative light fixtures, Illumination and dimming systems, Power receptacles, Cable Routing, Earthing, cable trays for tunnel, Panel Board and Building Management System, automation System, Audio Video System, Interactive TV system & video in demand with HDMI, UPS System, Lifts, ATS panels, Computer network (Fiber Optics, cables), Telephone Network, Diesel generators, Lightning Protection System, LV & Switchgears (MDB, SMDB, MCC….),transmission power lines & Street lightings.
Following higher management time schedule instructions and advices, reporting work field condition problems & statues to higher management, following activities of other departments in site.
Coordinate with Contractor for the fast progress work on site implementation of advanced system and material available in market as per the requirement and conduct weekly Site Inspection & prepare Monthly Progress Reports.
Conduct inspections for Quality Control and Quality Assurance Program, reporting, finding and recommendations. Specialties: Site Engineering, Design, Supervision, Construction and Maintenance, Pricing, Testing and Commissioning
Positive attitude, punctual, self-confidence and co-operative.
Self- motivated and as a team player delivering results under pressure,
Analytical and Problem-solving skills- can easily adopt with different nationality
Accountable for attending meetings with Team/ User for resolving different technical issues at the design stage.
Making Site Survey for upcoming Projects. Work Details during Execution: Duties & Responsibilities Involved in the technical and Management supervision along with site execution and highly driven in various project related to airlines.
All electrical low and Medium Voltage installation works, which were being carried out as per BOQ specifications and material as per standard codes NFPA-70, 72, NEC & International code.
Evaluate engineering proposals, shop drawings and design comments for sound electrical engineering practice and conformance with established safety and design criteria and recommend approval or disapproval.
Planning and execution on the electrical side for MEP projects closely monitoring the construction activities, attending weekly meetings at site with other Engineers and Contractor- Maintained weekly status reports
. Review and approval of shop drawings & material submittals submitted by Contractor.
Installations of all electrical works were carried out as per approved shop drawings ensuring compliance with safety requirements and as per standards
Strong stakeholder management skills
Work Details during Tendering: Duties & Responsibilities Responsible for leading
strong background in construction engineering, site management, administrative capabilities and managerial skills
Strong stakeholder management skills
Reporting Skills
Administrative Writing Skills
Team building skills
Communications skills
Attention to detail and high level of accuracy
Stress management skills
Time management skills
Problem Solving and Decision-Making Skills.
Energetic, creative, Committed, Self-Dependent, Team Player
Leadership Skills
Ability to direct the work of others
Ability to learn quickly
Knowledge of the retail environment