Resume

Journeyman Pipefitter NCCER certified

Location:

Baker, LA, 70714

Posted:

June 22, 2023

Contact this candidate

Resume:

CARLOS B. BANTULAN

Present Address : **** ****** ****** ***** *********

USA 70714

Mobile Phone No : 208-***-****

NCCER ID No. : 20965693

E-mail Address : adxu7g@r.postjobfree.com

JOURNEYMAN PIPEFITTER

General Construction, Maintenance – Industrial (Oil/Gas/Energy) Offshore/Onshore Commercial, Building, Residential, Food Processing and Institutional

Technically proficient hardworking and physically fit to meet the demands of construction.

Maintenance, turnaround shutdown, pre-commissioning, and commissioning job

Willing to relocate and free to travel as per project location.

Result-oriented skilled professional with a solid supervisory background and experience working hand on hand as trade skilled on projects mostly overseas.

Background includes:

Power Plant Piping / Boiler and Turbine high pressure steam line

Desalination Plant Piping /Fiber glass piping, sea water pipeline

Oil Refinery Piping / Process and Utility line (Onshore/Offshore)

Petrochemical Plant Piping / Cracking Furnace Process and Utility line

Multi Storey Building HVAC Piping/Mechanical Supply and Return

Fire Protection Sprinkler Piping

Sanitary and Plumbing –Construction/Maintenance

Irrigation and Domestic Water Supply

Sewage Treatment Plant, Irrigation Pumping Station

Pre-Fabrication Piping / Oil / Gas / Energy

Piping Supports Fabrication and Installation

Pre-commissioning and commissioning process / utility line

Piping Preventive Maintenance-Oil/Gas Field

R.C.Pipe Laying for road Rehabilitation Drainage System

Oil/Gas Refinery, Revamp, Turn around Shutdown Job

CAREER ACCOMPLISHMENT

At present working as Journeyman Pipefitter at Matrix Service Piedmont LNG Maxton North Carolina

Piping fabrication and installation Process and Utility Line Pipe rack, Tank area

Punch list job, piping rectification

Hydrotesting and pneumatic test

Previously working as Journeyman Pipefitter at Zachry Industries Duke Energy Recycling Plant Goldsboro North Carolina

Piping fabrication and installation Utility Line

Punch list job, piping rectification

Hydrotesting and pneumatic test

Previously working as Journeyman Pipefitter at Turner Industries turn around shutdown Plaquemine Louisiana

Piping fabrication and installation Furnace pipe re tubing.

Furnace Burner replacement and repair.

Previously working as Journeyman Pipefitter at Brown & Root BASF turn around shutdown Seneca South Carolina

Piping rehabilitation, piping fabrication as per ISO drawing, Replacement piping installation and additional piping system, pipe supports fabrication and installation

Removed damaged silo and replace new silo.

Previously working as Journeyman Pipefitter at Summit Industrial Construction Phillips 66 Gray Oak Pump station Project Three Rivers Texas

Piping fabrication and installation underground/above ground piping, Pump station piping installation big bore & small bore, carbon steel, stainless pipe.

Pipe supports installation, Punch list and hydrotesting.

Previously working as Journeyman Pipefitter at Moore Control System Inc. Sendero Midstream Phase 2 Expansion Project. Carlsbad New Mexico

Duties and responsibilities

Monitoring Piping fabrication to insure the correct orientation and materials specification.

Updating isometric spool weld mapping, spool numbering and welders’ stencils number.

Arranging spools subject for X-rays, painting/sun blasting and spool segregation.

Materials requisition as per materials specification.

Daily Pipefitters and welder’s accomplishment report.

Conduct daily toolbox safety meeting and provide JSA for every scope of work.

Previously working as Journeyman Pipefitter at Dilling Group Inc. / Matheson Tri-Gas Project Sulpur, Louisiana

Duties and responsibilities

Ground Piping Pre-Fabrication process / Utility line

Compressor area piping erection and fit-up

Cold box piping erection and fit-up

Piping supports installation

Previously working as Journeyman Pipefitter at CB&I Chiyoda Joint Venture Cameron LNG Project Hackberry Louisiana USA

Duties and responsibilities

Coordinate with job site Supervisor / Foreman to configure pipe system layout.

Order proper pipes and other materials.

Select supports, hangers for installation

Assemble pre-fabrication expansion loop, ramdom fit up at job site.

Select type and size of pipe.

Cut, thread, and hammer pipes according to pipe system specs.

Use saws and cutting torches to craft proper pipe sizes.

Turn off steam, water, or gas from pipe section.

Secure pipes to walls and fixtures using brackets, clamps, tools

Resolve problems such as obstructions or holes.

Dip nonferrous piping materials in molten tin and lead to prevent erosion, or galvanic and electrolytic action.

Remove water from flooded manholes or basements.

Installing various pipe systems process and utility line. Installs both high and low pressure pipes that carry hot water, steam and other liquid gases. commercial oil, gas fitting or steam fitting. Working in high places and enclosed spaces, climbing, bending, stooping, crawling, kneeling, lifting, and working in extreme temperature ranges. Layout, fabrication, assembly, installation, and the maintenance of piping and piping systems, appurtenances, and equipment for steam, hot water, heating, cooling, lubricating, and industrial processing systems, on the basis of knowledge or system operation and study of building plans or working drawings. Select type and size of pipe and related materials according to job specifications. Cut or drill holes in walls for the passage of pipes. Inspect work sites to determine presence of obstructions and to ascertain that holes will not cause structural weakness. Plan the sequence of installation to avoid obstructions and activities of other construction workers. Cut pipe, using threading machine. Assemble and install a variety of metal and nonmetal pipe and pipe fittings, including those made of brass, copper, lead, glass and plastic. Join piping by means of threaded, caulked, wiped, soldered, brazed, fused, or cemented joints. Secure pipes to structure with clamps, brackets, and hangers using hand tools. (Major responsibilities and target accomplishments expected of the position including the typical problems encountered in carrying out the responsibilities.)

Install, repair and maintain plumbing systems and components Main Activities

Review building plans and specifications to determine the layout for plumbing and related materials

Identify required tools and special equipment

Select the type and size of pipe required

Locate and mark positions for connections

Install supports and hangers for pipe

Assemble and install valves and fittings

Maintain all building codes, installation requirements and relevant legislation Main Activities Perform scheduled maintenance service on plumbing systems and

Site Piping and Plumbing Supervisor for a multi-million dollars development project in the Republic of Haiti. Employed by (OECC) Overseas Engineering & Construction Co., LTDA S.A., a Haiti based Taiwanese Construction Company and all the projects were funded by the Taiwanese Government.

Duties and responsibilities

Responsible of all Piping and Plumbing works, Haiti development project.

Assisting engineering department project proposal quotation

Material takes off and design material specification checking

Supervises and coordinates activities of all Foreman under their responsibilities

Materials segregation for every company projects

Oversees of all project drawings and material specification

Supervise and provide technical guidance to tradesman on-site installation

Maintain of all jobsite progress report

Conducting safety meeting and observes all safety rules and procedures

Supervise Hydro testing, water/chlorine flushing, air blowing, and Punch list work

Coordinates with vendor technician for start up

Material requisition for every project

Oversee and supervise jobsite piping / plumbing lay out

fixtures

Apply all codes to installations, repairs and maintenance

Ensure all requirements as specified by the manufacturer of systems and fixtures are met

Ensure all installations, repairs and maintenance are properly sized, aligned, supported and graded

Ensure all installations, repairs and maintenance meet the requirements of the appropriate codes

Monitor the quality and progress of the work scope and adherence to company and contractor procedures.

Ensuring that the piping fabrication and assembly activities are carried out to the schedule cleaning class / non-cleaning class and highest HSE standards.

Ensuring necessary HSE reviews are undertaken and identified actions completed.

Providing weekly progress reports to EPC Topsides Construction Manager.

Participating in fabrication and safety reviews for piping fabrication and assembly works.

Providing technical support to the project on piping fabrication, installation, Hydro testing, Punch list works and Pre-commissioning.

Provide input to Project Documents for Piping fabrication / assembly, commissioning and start-up requirements.

Supporting Hook Up and Commissioning team for load out/in and Start-up.

Ensuring the issuance of appropriate documentation for installation works e.g. requests, permits, isolations.

Work closely with QA/QC testing and company O&M group.

Previously working as Snr. Piping Supervisor at Plant Engineering Construction PTE LTD Malaysia Tokoyama Poly Silicon Project Chiyoda SDN BHD, Malaysia

Duties and responsibilities

Monitor the quality and progress of the work scope and adherence to company and contractor procedures.

Ensuring that the piping fabrication and assembly activities are carried out to the schedule cleaning class / non-cleaning class and highest HSE standards.

Ensuring necessary HSE reviews are undertaken and identified actions completed.

Providing weekly progress reports to EPC Topsides Construction Manager.

Participating in fabrication and safety reviews for piping fabrication and assembly works.

Providing technical support to the project on piping fabrication, installation, Hydro testing, Punch list works and Pre-commissioning.

Provide input to Project Documents for Piping fabrication / assembly, commissioning, and start-up requirements.

Supporting Hook Up and Commissioning team for load out/in and Start-up.

Ensuring the issuance of appropriate documentation for installation works e.g. requests, permits, isolations.

Work closely with QA/QC testing and company O&M group.

Previously working as Piping Supervisor at Plant Engineering Construction PTE LTD (PEC) Exxon Mobil Singapore Parallel Train Project (Foster Wheeler / Worley Parson)

Duties and responsibilities

Prepare daily reports of work progress and man power utilization.

Prepare weekly reports of the total spool erection, isometric weight installed, welded diameter inches of supports and joints and the remaining work front with the materials available.

Co-ordinate with the sub-contractors to achieve the targets and schedule set by the planning.

Issue the work permits ensuring SHE requirements.

Conduct safety walk through in the site in co-ordination with the safety department on weekly basis.

Supervision of all piping works and ensures safety and quality standards of the client

Inspection and approval of all the QA/QC submittals of the subcontractor

Previously working as Piping Supervisor at Plant Engineering Construction PTE LTD (PEC) Petrochemical Corporation of Singapore (PCS OLEFIN PHASE III PROJECT) Japan Gas Corporation (JGC)-Project

Duties and responsibilities

To study the isometric drawing received from the clients and to identify the pipe lines and carry out the punch list work.

Check flow direction arrows on valves; verify that they are properly identified and valves are installed in accordance with flow direction.

Ensure that pipe supports, hangers and guides have been installed in accordance with the piping drawings and the pipe support details.

Monitoring the QA/QC Documentation of the subcontractors and ensure that all the activities are incorporated to their system on daily basis and can be traced according to our requirements.

HSE initiatives and ensure compliance with Company's and Contractor's HSE plans and procedures.

Supervise and Inspection of cold and hot insulation, cladding on piping and equipment.

Line check to verify the use of correct material fittings, valves, and supports, prior to hydro test and prepare punch list for incomplete works, check and closing after the work is done

Previously working as Piping Supervisor at Plant Engineering Construction PTE LTD

FW-MEG – OSBL Shell Chemicals Seraya Project Singapore. (Project completed)

Duties and responsibilities

Serve as day-to-day interface with Contractor piping craft labor providing a focus on safety and quality.

Ensure that procedures and processes are understood and followed by the construction personnel.

Monitor and ensure compliance with specification, procedures, and plans.

Provide on-site knowledge of project specific piping construction requirements-

HSE initiatives and ensure compliance with Company's and Contractor's HSE plans and procedures.

Interface with QA/QC personnel to address quality issues/progress Monitor workforce progress as relative to schedule Verify arrival of procured equipment and engineering equipment implement field surveillance plans Assist with incident response case management Assist with change process at the work site.

Ensure Contractor's on site planning activities are appropriate to meet objectives.

Provide safety monitoring/leadership/coaching as well as participate in safety meetings.

Participate, coach and assist Contractor personnel in effective pre-task planning measures in JSA's, and toolbox meetings.

Participate in on site Risk Assessments and JSA development Assist in implementation of emergency response plans as needed Monitor environmental compliance as required Monitor site condition / readiness Record data for inclusion of "lessons learned"

Record data for inclusion in the preparation of close-out report.

Previously working as Mechanical Piping/Plumbing Supervisor Fluor New US Embassy Comp. Project Port au Prince, Haiti. Eight Buildings unsecured area NOB-MSGQ-UTILITY BLDG - GSO-WAREHOUSE- CCAC- MACAC- SCAC.

Duties and responsibilities

Supervision of mechanical chilled water hydronic piping supply and return pre fabrication and installation.

Installation, Chiller cooling tower, Primary/Secondary pump around piping, Air Handling

Unit installation, Domestic cold water and hot water system rough-in plumbing

Power Generator fuel supply system underground piping. Filling and distribution diesel /

Gasoline dispenser piping, underground fire hydrant and domestic water piping

Supervision domestic water supply treatment plant and waste water treatment plant piping

Installation, rough-in plumbing domestic water supply and hot water supply / return

Supervision plumbing fixtures installation, swimming pool Plumbing works

Oversee of project drawings and material specification checking

Supervision hydro testing and chlorine flushing, mechanical / plumbing punch list

Conducting safety meeting and observes all safety rules and procedures.

Served as the Piping and Plumbing Supervisor for a multi-million dollars development project in the Republic of Haiti. Employed by (OECC) Overseas Engineering & Construction Co., LTDA S.A., a Haiti based Taiwanese Construction Company and all the projects were funded by the Taiwanese Government.

Duties and responsibilities

Responsible of all Piping and Plumbing works, Haiti development project.

Assisting engineering department project proposal quotation

Material takes off and design material specification checking

Supervises and coordinates activities of all Foreman under their responsibilities

Materials segregation for every company projects

Oversees of all project drawings and material specification

Supervise and provide technical guidance to tradesman on-site installation

Maintain of all jobsite progress report

Conducting safety meeting and observes all safety rules and procedures

Supervise Hydro testing, water/chlorine flushing, air blowing, and Punch list work

Coordinates with vendor technician for start up

Material requisition for every project

Oversee and supervise jobsite piping / plumbing lay out

HVAC Piping supervisor for the Bouygues Batiment Company Project – Bank Republic

Of Haiti Port au Prince, Haiti

Duties and responsibilities

Supervision of mechanical chilled water hydronic piping supply and return pre fabrication and

Installation, Chiller cooling tower, Primary/Secondary pump around piping, Air Handling

Unit installation.

Supervision domestic water supply treatment plant and waste water treatment plant piping

Installation, rough-in plumbing domestic water supply and hot water supply / return

Fire Protection sprinkler Piping installation, sprinkler head installation

Oversee of project drawings and material specification checking

Supervision hydro testing and water flushing, mechanical / plumbing punch list

Conducting safety meeting and observes all safety rules and procedures.

Work as Piping Foreman then promoted to Piping General Foreman for two (2) Petrochemical Plant Project, Yanbu Kingdom of Saudi Arabia

Sub-Contractor – M. S. Al Suwaidi Contracting Company

Main Contractor – Japan Shiyoda Petrostar Ltd.

Project – Saudi Ibn Rushd Aromatic Petrochemical Plant Project

Duties and responsibilities

Supervision Area B process line piping erection and installation, Utility piping

Review all drawings and specification for fabrication and installation program

Undertake Piping and associated materials control on site

Supervise lay down yard spool segregation, coordinate rigging procedures for erection

Check materials deliveries against specification and order

Supervise and provide technical guidance to tradesman in fabrication and on-site installation

Maintain of shop and site progress report, look ahead planning and scheduling

Manages material requisition or transfer slip, oversees layout, fabrication and assembly of Pipes and piping system components

Plans work schedule and determine manpower requirements

Prepare test pack for hydro testing, flushing and steam blowing, Piping Supports installation. Responsible to inspect and maintains hand tools and power tools and equipment. Observes and follows all safety rules and procedures including of wearing the required

Personal safety equipment and clothing, Participates in Safety Meetings

Main Contractor – Fluor Daniel Arabia LTD.

Project – (YANPET) Yanbu Petrochemical Ethylene Expansion Project

Duties and responsibilities

Supervision Vent Flare module piping erection and installation from the new plant.

Utility piping from existing to new plant, Piping Supports installation

Supervision all existing hot tapping tie in process and utility line

Check materials deliveries against specification and order

Supervise and provide technical guidance to tradesman in fabrication and on-site installation

Maintain of shop and site progress report, look ahead planning and scheduling

Manages material requisition or transfer slip, oversees layout, fabrication and assembly of

Pipes and piping system components coordinate rigging procedures for erection

Plans work schedule and determine manpower requirements

Prepare test pack for hydro testing, flushing and steam blowing

Responsible to inspect and maintains hand tools and power tools and equipment.

Observes and follows all safety rules and procedures including of wearing the required

Personal safety equipment and clothing, Participates in Safety Meetings

Mechanical Piping Foreman, Rabigh Combined Cycle Power Plant Project – a consortium of ABB Switzerland / ABB Sae Sadelmi Italy

Duties and responsibilities

Boiler side and Turbine ground Piping erection and installation

Tank area fuel piping installation and fuel oil treatment piping installation

Sea water line piping from intake to desalination plant

Main steam piping erection and installation, boiler feed pump piping

Temporary piping installation for steam blowing

Spring hangers piping supports installation

Ethylene/Butene Piping Leadman Local Shop Maintenance- (PETROKEMYA) Arabian Petrochemical Company- M. S. Alsuwaidi Contracting Company- Manpower Supplier

Duties and responsibilities

Ethylene cracking furnace re tubing and repair, Process line additional branches hot tapping

Process line additional steam tracing piping, steam line pin hole repair and valve re packing

Safety valve calibration and valve lubrication, rotating pumps mechanical seal replacement.

Ethylene / Butene plant shut down works, Process and utility line piping modification and

Repair, Heat exchanger tube bundle removal for hydro blasting, butane plant pump around

Piping removal for hydro blasting and re installation

Cracking furnace top and bottom exchanger cover removal for hydro blasting

Attending safety rules and regulation procedures seminars

Confined space and working permit training.

Phase I Qurrayyah Power Plant and Desalination Project/ boiler and turbine piping

Sub-Contractor, M.S. Al-Suwaidi Contracting Company

Main Contractor, Mitsubishi Heavy Equipment Ltd.

Duties and responsibilities

Boiler side and Turbine ground Piping erection and installation

Main steam line 24” heavy wall thickness 80mm piping erection and fit out from boiler side

To high pressure turbine, High temperature return steam line piping installation,

Extraction steam line piping from auxiliary boiler to dearator,

Boiler feed pump piping and boiler circulation piping installation

Condenser cooling system piping installation, Piping supports installation

Steam drum Piping bypass manifold piping installation

Zero Accident Report (ARAMCO) Arabian Oil Company Shutdown Works

M.S. Al-Suwaidi Co. – Manpower Supplier

Mina Az-zour South Power Plant Project – H.V.A.C. Piping – Hitachi and Nessie Sangyo Joint Venture

H.V.A.C. and Fire Protection/ Plumbing – Riyadh King Saud University Project – French Joint Ventures

Successfully worked with foreign nationals, sharing skills and expertise safely.

Holds professional driving licenses.

Possess industrial Pipe fitter trade test and training certificate.

First aid and CPR certificate issued and conducted by Royal Commission Jubail and Yanbu Health Services Department

Safety leadership training certificate issued and conducted by Fluor Daniel Arabia LTD

Oil / Petrochemical Safety Orientation Course Certificate

PROFESSIONAL EXPERIENCES

Piping Supervision / General Construction / Maintenance (Overseas)

Can read and interpret blueprints piping layout plan and isometric drawings

Piping bill of quantity materials take off, piping scope of work planning and scheduling

Prepare cutting list of spool, pattern development layout for piping pre-fabrication

Pipe spool segregation, piping erection and rigging supervision, field weld fit-up preparation.

Workers scope of works orientation – conducting everyday safety meeting and housekeeping.

Experienced in oxy-acetylene gas welding and arc welding, copper tube sweating.

Performed air test hydro testing, steam blowing, air and water flushing and punch listing

Experienced in hot tapping tie-in, oil/gas field, Hydro testing and pre-commissioning

Oil/gas field shutdown, furnace re-tubing, heat exchanger cleaning, valve lubrication, leakage repair, piping rehabilitation, piping modification and safety valve calibration.

Experienced in on-site piping erection Oil and Gas Industries, fit-up, big bore, small bore, heavy wall, process line and utility pipe line

Pre-fabrication fit-up, carbon steel, alloy pipe, stainless steel, copper pipe, galvanized pipe etc.

Sanitary drainage system, domestic water supply distribution pump house, Irrigation Pumping Station, PVC Piping from 2” up to 80’ diameter of Pipe, schedule 40 – 80 – 160.

Plumbing design and Plumbing materials take off including plumbing fixtures.

Plumbing Works, hot water supply system, cold water supply system and Plumbing fixtures installation, domestic water supply distribution, Fire protection sprinkler system.

Mechanical room for H.V.A.C. supply and return main pipe header piping, Three-way valve by pass manifold Piping installation.

Compliance of Piping Code and American Standards, Intl. Plumbing Code and ARC Welding Society Welding Procedure.

Computer literate basic AutoCAD, Microsoft word / excel- Operates light construction equipment.

Safety slogan “Your plan for tomorrow depends on your “SAFETY” today

Work History

Matrix Service Piedmont LNG Project

Country: Maxton North Carolina USA