Full name: Darice Livingston

DOB (MM/DD): **/**

Shift Timings: 1st Shift

Last FIVE digits of SSN: 10264

Is candidate a Former Spirit Employee: No

Summary:

Professional experience working on United States Army / Department of Defense, Gulfstream, Lockheed Martin, MHI, STI- Dobbs Air force Base, Triumph, PEMCO, AAR, Air Canada, Flight Star, with Aerospace industry experience.

Responsible for performing Installations, assembly, sub assembly and structures Boeing.

Worked on Boeing 757, 747, 737s, A319, A320, A321, A380 & Airbus

Worked on Jet Blue, 320, 319, 321 & UH-60, Medevac, C-130, MD -11

Responsible for setup and performance and preventive maintenance on a range of aircraft, handled the fabrication and structural.

Assembled aircrafts, working as a structures technician, composite & component bonder/fabrication, systems & repair work for multiple aircrafts

Inspection of parts, aircraft structure, Sheet metal repair, riveting, painting, Teardown, inspects, and rebuild piston engine, Basic weight and balance calculations, Safety wiring, troubleshooting, read schematics

Fastener replacement and fastener capsulation, installing standoff installation, sealant rework and corrosion prevention, touch-up of decorative finishes, left/right, midland leading edges, fillet seal replacement C/T rib assembly.

Insert & Install rivets and hi-loks, Read Blueprints, Responsible for mechanical repairs and maintenance for structural parts Build Skid Steer and drive motors, Read Blueprints and quality control, Re-work all parts or jobs that need repair

Education:

Aviation Institute of Maintenance – Chesapeake, VA / Duluth, GA 2014

Florida State College – Jacksonville, FL 2012

Goose Creek High School – Goose Creek, SC 2002

Professional Work Experience:

Reason of Gap: Unemployed Looking for a Job 04/2022 To Till Now

Gulfstream, Savannah GA 01/2022 To 03/2022

Avionics Technician

Provide direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.

Conduct troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.

Enforces the company FOD program, tool control program, 5-S program and all safety regulations

Conducts functional and operational tests to evaluate performance and reliability.

Demonstrated the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity

Maintain up to date knowledge and skills required, while obtaining course completion of FIBER OPTIC Certification

Lockheed Martin, Greenville SC 05/2021 To 08/2021

Structural Mechanic

Perform repetitive movements and work overhead, occasionally sit climb and balance. Provided support by inspecting, troubleshooting, repairing, overhauling and modifying aircraft systems and power plants in accordance with established written procedures, specifications, and standards with certificate of completion for the following.

Split Sleeve Cold working (FTI)

Jurisdiction and Classification 101

Atlas Perform Check-ins for Leaders

I-R Responsibilities/Process-Production/Quality Assurance/

F22 Interchangeability-Replicability

F-16 Interchangeability-Replicability

DTP Material Center Data Loading

Cryogenics Handling of Materials QUAL

Material Handling Processes and Procedure

MHI-Bridgeport - WV 02/2021 To 04/2021

Structural Mechanic

Effectively document job completion of paperwork, read blueprints to ensure build and modification completion, followed both written and verbal instructions

Performs sheet metal bends to guidelines and specifications as dictated in normal aviation practices

Build components for aircraft applications using a variety of sheet metal materials

Shoot and buck rivets to specifications

Recognize differences in types of metals including structural strength and thickness

Performed repairs to the aircraft along with determine which repairs can or cannot be made

STI- Dobbs Air force Base - Mariette, GA 09/2019 To 12/2020

Sheet Metal Technician

Installation of Automatic Dependent Surveillance-

Broadcast (ADS-B) out and mode select Enhanced Surveillance (EHS) system on selected C-130 Aircrafts

Department of the Air Force Technical Order-

These modifications require specific accomplishment at a time designated by the lead and AFLCM/WLNM.

Performed system operations check and inspections in accordance with Paragraph 7.2 of TCTO

Install GPS Antenna mounting provisions/ receiver and EBC mount per drawing 87522

Install locate Doubler/Adapter plate/wet rivets w/81733 B1/2 sealant

Clean/Alodine exposed surfaces

Remove clecos, deburr and counter sink holes

Apply prime/paint fastener heads and stripped surfaces

Assembles GPS receiver assembly per drawings 87558

Inspect install and obtain parts

Trans Stats - ST Louis MI 04/2019 To 05/2019

Sheet Metal

Inspect, test and repair the electronic components of aircraft communications,

inspect, test, adjust, and repair the electronic components of aircraft communications, navigation, and flight-control systems

compile complete maintenance-and-overhaul records for duty performed

calibrate and adjust the frequencies of communications apparatus when installed and perform periodic functions

Measure and mark dimensions and reference lines on metal sheets

Drill holes in metal for screws, bolts, and rivets

Install metal sheets with supportive frameworks

Fabricate or alter parts at construction sites

Triumph Aerospace Structures - Red Oak, TX 05/2018 To 08/2018

Aerospace Structures / Assembly

Perform or inspects setups and adjustments, holding tolerance to blueprint and work instructions specifications

Conducted a wide variety of complex tests on fluids and electrical systems, checkouts, troubleshooting and rework on components, instruments and assemblies; may prepare reports and suggest improvements and modifications from data collected monitor and verify quality in accordance with statistical process or other controll3ed procedures.

Lead inventory and cycle count, 29 left hand and right hand and 31 left hand and right hand.

Experience in:

Product development

Skins & Stringers

Metallic/composite construction

Highly automated facilities

Designs, analysis and testing

Integrated wings

PEMCO - Tampa, FL 11/2017 To 04/2018

Structures Mechanic

Performed chassis installation of mod man in top part of fuselage crown from frame 59 to frame 60

Performed chassis installation of KANDU electrical system from frame 60 to frame 61

Performed chassis installation of KRFU band radio frequency from frame 56 to frame 57

Installed brackets and drilled holes on interior and exterior of aircraft in order to install transformer and receiver.

HAECO - Lake City, FL / Macon, GA 08/2016 To 10/2017

Avionics Technician

Tested electronic instruments, using circuit testers, oscilloscopes, and voltmeters

Repair or replace malfunctioning components side wall panel ceiling panel and seats

Assemble components, such as electrical controls and junction boxes and install software

Interpret flight test data to diagnose malfunctions and performance and problems

Keep records of maintenance and repair work

Performs Battery 1 and 2, Extraction Power available, manages key point PPOS Data Display

Operates ADIRS: IR 1, IR 2, IR 3

Conduct engine test United aircraft model and Jet Blue, 320, 319, 321, FADEC 1 and 2 on ground and maintenance test, check inlet, outlet, temperature airspeed, air attraction

AAR - Duluth, MN / Miami, FL / Rockford, IL 12/2014 To 07/2016

Sheet Metal Mechanic

Installed & tested new go-go 2ku airborne Wi-Fi subsystem components.

Installed in- cabin network; wireless access point and servers after removing old system components.

Rewired power also data lines.

Test components after installing to ensure grounding to the proper connection.

Reconfigured & Tested internet protocol (TCP/IP).

Performing assembly/disassembly of cargo bays (aft & forward)

Removing and replacing of interiors

Performing drilling and riveting on cross beams

Air Canada - Duluth, MN / Miami, FL / Rockford, IL 12/2014 To 07/2016

Sheet Metal Mechanic

Performed exceptional work on the Airbus product line, A319, A320, A321 under AAR

Flaps, wings, door, side panelling conducting drilling, riveting, and etc. on aircraft

Responsible for interior, removal, and install aircraft interior pieces, including doors,

bulkheads, lavatories, carpeting, sound-proofing mechanisms, lighting, and cabinets.

Oversee an airplane's radar system, radio communications equipment and the flight controls.

Responsible for inspecting and testing the complex electrical and computer systems.

Perform assemble and install electrical components and keep detailed written records of repair

work performed on aircraft.

Interiors replace, complete cabin reconfiguration and system integration, varnishing wood veneer replacement, soft coverings carpets, curtains replacement, flooring and counter tops.

Kaman Aerospace - Jacksonville, FL 01/2014 To 08/2014

Structural Mechanic / Assembly

Responsible to build, fit and install fabricated parts to manufacture fixed wing or rotary wing aircraft or aircraft sub-assemblies

In-depth knowledge of the standard procedures and guidelines of repairing, servicing and maintenance of UH-60 Medevac S-model, and M-model

Perform the tasks of pre joined assembling 1A, 1B laydown and modifying aircraft components and systems

Performed all fabrication tasks in assigned UH-60 MEDVAC, capable of operating all workstations, equipment within the assigned cell(s).

Responsible for maintaining production output of cell(s) to schedule, ensuring tact time is attained with a minimum of scrap, waste or downtime.

Flight Star - Jacksonville, FL 06/2013 To 10/2013

Structural Mechanic

Performing Structure work on Boeing 737s (wings, airframes, cargo, and etc.). Experience shooting and bucking rivets.

Conducted aircraft and safety procedures training

Performed routine servicing of aircraft engines, accessories, and secondary systems

Identified, removed, and installed inspection access panels and aircraft components

Installs, routes, dresses, ties, and clamps electrical components

Department of Defense 07/2005 To 12/2012

Contract Service Assignments

United States Army - Bagram Airfield, Afghanistan 12/2011 To 12/2012

Sheet Metal Mechanic

Structural mechanic skilled in helicopter repair and sheet metal (UH-60s (A, L, M))

Experience performing structural work on aircraft by working on skins, shooting rivets, countersinking, bucking, and etc. to ensure the aircraft is flight worthy.

Conducted inspection, testing, repairs, maintenance, and servicing of aircraft.

Fabrication, assembly, installation, and repair of sheet metal products and equipment.

Remove and install aircraft sub-assemblies and components.

Have experience working with and around fuselages and fuel tanks.

URS Corporation - Warner Robins, GA 11/2011 To 12/2011

Aircraft Mechanic (United States Air Force)

Inspection and repair of military transport aircraft

Troubleshoot malfunctions in aircraft structures – landing gear, flight surfaces and controls, anti-icing, pneudralic, engines, auxiliary power unit, ventilation and heating systems\

Fabrication, modification, and installation of sheet metal for aircraft

Experience performing structural work on aircraft by working on skins, shooting rivets, countersinking, bucking, and etc. to ensure the aircraft is flight worthy.

Performed repair and assembly of wing structures on aircraft by doing sheet metal fabrication and maintenance. Performed repairs on ribs and spars on the wings of the aircraft and skin replacement/repair.

Have experience working with and around fuselages and fuel tanks on the aircraft by doing checks, preventative maintenance and etc. on the aircraft. Performed work on fuel tanks when leaks occurred.

Assist NDI in inspection of aircraft wings and fuselage

URS Corporation - Bagram Airfield, Afghanistan 11/2010 To 11/2011

Force Protection (United States Air Force)

Provide security and safety for facility

Monitor personnel flow through screening check points

Close and/or reopen identified areas in the event of security breaches or official notification

General Dynamics IT Submarine - Chesapeake, VA 08/2007 To 10/2010

Mechanical Technician (United States Navy)

Gained power generator technician experience on MD-11, B-747, C-130, B-757, A-380, UH-60

Perform aircraft modifications and maintenance functions of airframes, landing gear, engine components, and electrical components

Responsible for maintenance and repairs of electronic, electrical, mechanical, and hydraulic systems

Military Sealift Command - Virginia Beach, VA 07/2005 To 01/2007

Wiper (United States Navy)

Perform routine deck maintenance and ship preservation

Responsible for maintenance and repair of ship machinery – material handling, equipment, elevators, and winches

Bouchard Transportation - Staten Island, NY 10/2003 To 06/2005

Deckhand

Skilled in the safe operation of water vehicles

Operated and maintained ship’s anchor and cable equipment

Performed tasks associated with whip’s rigging, rope work, and lifesaving equipment

Contact this candidate