NAME: Steven Vincent Mrazik DATE: **/**/****

POSITION TITLE

Senior Quality Assurance Engineer

ORGANIZATION

Quality Assurance

LOCATION

Pueblo, Colorado

CITIZENSHIP

USA

CONTINUOUS SERVICE

February 2011

SPOUSE'S NAME

None

CHILDREN'S DETAILS

None

PROFESSIONAL LICENSES AND SOCIETIES

EDUCATION AND PERSONAL DEVELOPMENT PROGRAMS

Degree, Certificate, etc.

School

Major (or Subject)

Date

Diploma

Saint Agatha High

General Studies

1976

Personal Development Programs

Bechtel

Project Baseline

ISO 9000

Six Sigma

OTHER SIGNIFICANT INFORMATION

(Examples of relevant information that might be included here)

LANGUAGES:

English

CAPABILITY:

Fluent

DATES

WORK HISTORY

FROM

TO

COMPANY, DIVISION, DEPARTMENT

LOCATION AND SUPERIOR

POSITION HELD, SUMMARY OF RESPONSIBILITIES AND SIGNIFICANT ACCOMPLISHMENTS

08/16

Present

Bechtel NS&E, Quality

PCAPP Pueblo, CO

Charles Colby / Dennis Lacey

Quality Control Specialist

Assigned to perform multidiscipline QC inspections in support of the Pueblo Chemical Arsenal Pilot Plant. Tasked with creating and issuing Quality Awareness Bulletins and new Quality Corner for the Site Communicator

07/16

8/16

Bechtel NS&E, PE&QS

BGCAPP Richmond, KY

Fran Petrella / John Gran

Quality Control Specialist

Assigned to perform multidiscipline QC inspections in support of the Blue Grass Chemical Arsenal Pilot Plant

05/15

02/16

Bechtel OG&C, Quality Assurance, Angola LNG

Scott Monson / Hasan Salih

Assigned as Quality Manager / SQE to assist the project with multi-discipline quality issues during retrofit, remediation and new construction. Created training modules for craft on welding, pipe/component alignment and assembly, and general issues with construction of mechanical, electrical and instrumentation. Created weekly Quality Awareness Bulletins on multidiscipline subjects to inform and educate project personnel. Assisted Field Engineering on resolution of nonconforming conditions and construction issues. Interfaced with client on construction and test issues

01/12

04/15

Bechtel OG&C, Quality Assurance, Gladstone, QLD

Bob Hernandez, QA Manager

Senior Quality Assurance Engineer on the GLNG Project in Gladstone, Australia. Responsible for performing audits and surveillances of General Contractors and subcontractors, during the construction, and Start Up phases. Specific duties and responsibilities include review and approval of contractor procedures, ITPs, inspection and test forms, and QA/QC personnel.

03/11

12/11

Bechtel OG&C, Quality Assurance, Port Arthur TX

Senior Quality Assurance Engineer on the Motiva Crude Expansion Project, Port Arthur, TX., Responsible for performing audits and surveillances of General Contractors and subcontractors, during the construction, and Start Up phases. Specific duties and responsibilities include review and approval of contractor procedures, ITPs, inspection and test forms, and QA/QC personnel.

10/10

03/11

Electrical Planner, Sun Technical Services, Bridgman MI, DC. Cook Power Station

Senior Electrical Planner at the D.C. Cook Nuclear Station. Write electrical procedures and prepare work packages for construction and maintenance in support of future outage cycles on units I & II

09/10

10/10

QC Inspector, NIC, Soddy Daisy, TN, Sequoyah Power Station

QC Inspector Certified Level II E&I, Mechanical and Welding for the 2010 outage. Specific duties were MSIV rework and reactor refueling operations.

07/10

09/10

Site Lead, Orbital Engineering,

Hammond IN

Site Lead on a project to assess oil terminal piping for product distribution. Performed UT inspections of pipe.

10/08

03/10

AEI, Wood River IL, ConocoPhillips

QA Coordinator

Restart & Revamp existing refinery, New Units Construction. Coordinate QA multi-discipline inspection activities with onsite construction contractors, URS, Fluor, Cherne & Bechtel. Support construction for the Sulphur Recovery Unit, Hydrogen Plant, Wet Gas Scrubber, RO Unit and Caustic Scrubber. Review contractor's procedures and ITPs for code and site requirements. Attend RFP and contract negotiations for contractor selection. Perform source inspection of fabrication shops producing ASME Sec. IIIV Di.1 & 2 vessels. Coordinate and monitor all self perform and contract NDE testing for civil, structural, mechanical and piping/welding

02/08

09/08

QA Manager, Fluor, Columbia SC, Wateree Power Station

QA Manager/ Fluor Construction at the Wateree Station (SCE&G) SO2 Compliance Project. Monitor multi-discipline contractors performing fabrication and erection for the Flue Gas Scrubber System. Over site includes civil soils, structural, coatings, piping & welding, mechanical and rotating equipment, electrical & instrumentation. Administration of the Quality Program/Manual. Document control and record retention. Perform inspections of: Concrete pours for foundations and buildings, tank erection and testing per API 650. Erection of 300' absorber stack, structural steel including mech & elect supports. Fabrication of absorber duct work. Installation and testing of underground utilities. Hydro test of piping, installation of pumps and motors. Cable tray, conduit and cable installations and test. Perform welder testing per AWSD1.1 and ASME Sec. IX. Set up and monitor 3rd party NDE. Issue and resolve DR/NCR conditions. Assemble turnover packages for client. Liaise with client for all construction quality issues.

01/07

01/08

Lurgi, Memphis TN, Quality Assurance

Source Inspection Coordinator for Lurgi Inc. on domestic and international projects for Biofuel, Ethanol and Bio-diesel plants. Responsibilities include, review and audit of all domestic and international suppliers for QA/QC program components and compliance. Coordinate required inspections for each fabricator; this includes multi-discipline inspections for electrical, instrumentation, mechanical, piping & welding and coatings. Attend witness and hold point inspections where needed. Assist in all quality related issues and provide resolutions to nonconforming conditions. Interface with clients and suppliers for fabrication and installation requirements.

07/06

01/07

QA/QC Supervisor, Fluor, Ras-Lafan Qatar

QA/QC Supervisor for Fluor Mideast Ltd. to support Ras Gas in Ras Lafan, Qatar. Responsibilities; Supervise multi-discipline inspectors for Off-Plot Projects. Review of secondary contractors’ project plans, organization, ITPs, procedures, and specifications. Author and issue project specific procedures and ensure adequate inspection coverage for all discipline. Perform random audits of each contractor and their respective subcontractors. Participate in Contract and Design Reviews to ensure compliance to clients, (Ras Gas) requirements. Perform facilitation with construction and engineering to resolve deficiencies and nonconformance's. Provide training to new multi discipline inspection personnel on client specifications and procedures

07/05

06/06

QA/QC Supervisor, Willbros, Port Harcourt Nigeria

QA/QC Supervisor for Willbros International in Nigeria. Responsibilities; Development of multi-discipline ITPs and procedures to support modifications and new construction of onshore/offshore plants and platforms. As a liaison to the client I have developed documentation to meet the requirements of my employer, international codes and the Nigerian Government. Interfacing daily with design engineering, operations, maintenance and construction for resolution of conflicts and/or changes to facilitate milestone completion. My field duties include supervision /coordination of multi-discipline inspection personnel to complete modifications on (5) offshore platforms that are required to achieve alternate pipeline transmission of oil for uninterrupted service. Additionally, I serve as alternate QA Manager to support a quarterly rotation schedule.

10/99

06/05

Senior Mechanical & Welding Inspector (Plant & Equipment)

Saudi Aramco on contract from AL-Hoty Establishment. Performed inspections on LSTK (Lump Sum Turnkey Projects) and Capital Projects of 50 million plus as Aramco's site representative. Projects included: Pipeline Cleaning Facilities for the Eastern region, Offshore Inspection Supervisor for field inspectors supporting new jacket Installations, wellhead piping and new decks on oil platforms at the Safiniya, Abu Safah, Zuluf & Marjan fields in the Arabian Gulf. Berri Gas Plant modifications, tie-ins and commissioning for the Ethane Recovery Project, Cross country pipeline installations for tie-ins to Juaymah and Berri Gas Plants, Remediation Project at the Rastanura South Refinery including start up and commissioning. Responsibilities included: Review of contractors QA/QC program and personnel for project approval, monitoring of contractors personnel for compliance to Saudi Aramco's procedures, testing of all welders to ASME Sec IX and AWS D1.1 using multiple weld processes, supervise NDE crews performing (PT, MT, UT, RT & PMIs), review and approval of modifications and as-built, review and approval of construction completion packages for hydrostatic and pneumatic tests, performed walk downs, punch listing and assembled mechanical completion packages for completed facilities. Verified pump, motor, and compressor alignments. Inspected all phases of Hot-tap installations for modifications and tie-in to existing facilities. PID Welding Supervisor for the Refinery Remediation Project. Responsibilities: Control of all piping and welding rework in the Hydro cracker, Visbreaker, Hydrogen and Amine units. QA/QC liaison for construction activities of operations, maintenance and sub-contractors. Supervised crews performing NDE and stress relief activities. Reviewed and approved packages for modifications to tanks and vessels as per API-510 & 653 requirements.

07/99

09/99

Auditor, Vitale & Associates, MI

Responsibilities: Review and audit of the mechanical sub-contractors’ schedules and plans. Assisted in creating graphics for submittal to the client, (charts, histograms, etc.) to determine project progress. Performed field audits of work in progress to provide the client with information to improve performance.

04/99

05/99

Level II QC Inspector, The Atlantic Group, VA

Level II Mechanical, Electrical, Instrumentation, Piping & Welding, Receipt, and Coatings. Performed inspections on service water piping mods, control room electrical and instrument mods, high pressure safety injection piping (carbon & stainless) installations, valve and pump maintenance and rebuilds.

03/99

03/99

Maintenance Supervisor, IPC Communications, St. Joseph MI

Maintenance Supervisor on a project to replace industrial storage racks.

06/98

11/98

Site QA Manager, Holtec International, Waynesboro GA

Vogtle Power Station (Spent fuel rerack project). Responsible for administering the Holtec Quality Assurance Program. Duties included: procedure writing, document control, inspection of all field activities (receipt, testing, welding, rack installations and adjustments). Monitored and verified procedural compliance of all spent fuel diving operations. Reviewed and updated all as-built drawings. Inspected rework and repairs and resolutions to nonconforming conditions. Provided complete project documentation turnover packages to the client and Holtec Engineering.

03/98

05/98

Level II Mechanical / Piping / Welding and Electrical Inspector, MQS Inspection Services, Laplace LA

Mechanical, Piping, Welding, and Electrical Inspector. Contracted to support the restart of a mothballed refinery. Duties included: pipe inspection and walk downs, hangers and supports, as-built drawings of existing systems. Performed UT measurements of installed piping for minimum pipe wall calculations. During the months of April and May my assignment was to inspect all pumps, motors and compressors installed in the DHT and NHT units. Verified heater and boiler modifications to ASME and API code requirements

07/97

11/97

QC Piping & Welding Supervisor,

Foster Wheeler, Butte MT

Q.C. Piping & Welding Supervisor / Foster Wheeler A grassroots project designed to produce high quality silicone products for computer chips. Duties included: Testing of all welders to ASME Section IX and AWS D1.1, inspection of all pipe, supports and associated equipment (pumps, valves & motors). Produced as-built drawings of all completed installations, supervised all NDE activities (PT, MT, UT, RT) and maintained all records of inspections and qualified welders. Verified rework and repair of nonconforming components. Assembled turnover packages for client.

11/95

06/97

Quality Processes & Systems Industrial Engineer

Under contract to Kalama Services at Johnston Atoll Chemical Weapons Facility, Military contract N67242-94-D-0519. Responsibilities: Authored Kalama Services Quality Manual based on ISO 9000 (1994) quality system requirements. Assisted annex personnel with quality implementation using the TQM and CPI principles. Developed training modules and administered classes on ISO and operation of various heavy equipment. Procedure writer and document development (forms, logs, spreadsheets, etc.). Design review of modifications for all disciplines. Inspected on-going construction activities including modifications, rework, repairs and new installations. Performed audits of facility annexes to assure program compliance. Served as alternate QP&S Manager.

09/95

10/95

Level II E & I, Mechanical, Piping & Welding QC Inspector, Raytheon, York PA

Contracted to Raytheon at Peach Bottom Power Station. Outage support.

Performed inspections on service water piping installations and modifications, control room panel mods, valve rebuilds, cable installations and terminations.

04/95

05/95

Level II E & I, Mechanical, Piping & Welding QC Inspector, Raytheon, Ottawa NY

Contracted to Raytheon at Nine Mile Point Power Station. Outage support. Performed inspections on service water upgrades and safety injection piping

04/94

03/95

Site QA Manager, Holtec International, Soddy Daisy TN & Omaha, NE

Rerack Projects at Fort Calhoun & Sequoyah Power Stations

Responsible for administration of Holtec and site quality program on a special project to replace the spent fuel storage racks. Duties included: procedure writing, documentation control, inspection of all field installation activities, organization and monitoring of diving operations, reviewed and updated installation drawings, verified repairs and rework, inspected testing and performed data collection. Provided complete turnover packages to the client for project completion

10/93

03/94

Welding Engineer, Natkin Mechanical Contractors, Clarksville TN

Welding Engineer for Natkin Mechanical Contractors / TVA Cumberland City Retrofit (Flue Gas Scrubber Modification).

Responsibilities: Control of all activities related to welding of piping and components including pumps, valves, vessels, tanks and tie-ins. Verified hydro and pneumatic testing of piping. Tested all welders to ASME SEC IX requirements. Reported to the client (UE&C) for resolution of all installation related problems. Responsible for welding equipment and supplies.

03/93

09/93

QC Supervisor (Piping / NDE) for Litwin Engineers at Hess Oil St. Croix

Supervised inspection and test personnel during construction of the Catcracker.

Responsibilities: Inspection of piping and related components at the Acid, Alkalation, Select Hydro and Dimersol units. Maintained tractability and tracked all required NDE inspections. Performed inspection of stress relieving and hydrostatic testing of piping. Responsible for Co-ordinating testing in all units. Conducted walk downs for system turnover. Verified welding of piping, tanks and vessels. My designated unit (ACID) was the first online.

01/93

3/93

QC Inspector, E & I & Welding, NES, North Anna Power Station

Outage support for refuel cycle. Monitored service water piping upgrades including new pump, valves and associated welding. Inspected maintenance and testing of electrical switchgear.

08/92

12/92

QC Inspector, E&I, Raytheon, LaSalle County Power station

Outage support for refuel cycle. Inspected ongoing maintenance and testing of circuit breakers. Monitored control room electrical & instrument modifications.

02/92

08/92

QC Inspector, E&I, Mechanical, Piping & Welding, NRT, DC Cook

Power Station

Outage support for refuel cycle. Monitored control room electrical & instrument modifications. Inspected welding of containment piping mods

08/91

01/92

Field Engineer / QA Manager, Brand Utility Services, Kuosheng

Power Station

Inspected and monitored installation of new spent fuel racks. Verified receipt, testing, modifications, repairs and installation. Responsible for all turnover documentation and records.

10/90

7/91

QA/QC Inspector Level II E&I, NRT, Calvert Cliffs Power Station

Outage support for refuel cycle. Inspected ongoing control room electrical & instrument modifications.

Monitored instrumentation calibrations.

09/90

10/90

QC Level II Electrical, Volt Tech Services, Watts Bar Power Station

Performed inspections on electrical conduit and supports

06/90

09/90

Welding Inspector / Test Engineer, HC Price, Alaska

Verified the installation of Piping and related components for the H2S mod. Inspected carbon and alloy Welding (PI, P8, P5)" also pumps and valves installed. I was responsible for initiating NDE on completed installations and repairs of nonconforming welds. Verified hydrostatic testing of piping systems. Performed receipt inspections, updated drawings, monitored welder qualification tests and assembled turnover packages for the client.

10/80

06/90

Various levels of QA/QC Inspection on multiple Nuclear Power Plants performing new construction and outage work.

Duties included QA/QC Inspection and testing of piping and related components, Electrical & Instrumentation Components, Testing of Mechanical & Electrical Systems, Inspection of All Piping / Structural Steel, Fireproofing, Civil, receiving inspection.

Contact this candidate