Resume
of
Rashid Kabir
Present Address: Hazaribag, Pangaon, South Keraniganj,
Dhaka.
Mobile: +880**********
E-mail: adxpkl@r.postjobfree.com
Field of Specialization: DCS, SCADA, PLC
[Recently I have done a Complete DCS Project without any help of third party in Hollysys DCS (Hollias MACS 6.5.3) including full program logic and HMI development which is about 800-900 I/Os for our Phase-2 unit]
Job Experience: [Total Job Experience: 9 Years]
1.Bashundhara Oil and Gas Company Limited (Bashundhara Bitumen)
Post: Sr. Engr., Instrumentation and Control (Deputy Manager).
February 2019- Present… (4 years 4 months)
Duties and Responsibilities:
Supervise all Electrical and instrumentation work of project such as Errection and Commissioning of 500 KTa and 1.2MTa Bitumen Refinery Plant as well as Modified bitumen unit.
Review and make comments on all Electrical and Instrumentation drawing documents such as Electrical SLD and control drawing, Process P&ID, PFD, Cause and Effect diagram, HAZOP study of project.
Maintenance troubleshooting of process instruments such as Temperature Transmitter, Pressure transmitter, differential pressure transmitter, Radar level gauge, control valves, on off valves, flow transmitters, level transmitters, Gas detectors, proximity sensors, pneumatic actuators, solenoid valves etc.
Hand on experience on DCS (Hollysys-Hollias MACS6.5) commissioning work, control loop checking, Control Loop tuning, online simulation and troubleshooting work.
Programming, Logic development, SCADA Development, Logic modification in both online and offline in Hollysys DCS.
Practical Experience on PLC (Siemens S7-1200, S7-200, Delta) hardware and software, program upload-download and modification work.
All instrumentation and automation work of Drum Manufacturing Plant and Drum filling Station.
Over all electrical and Instrumentation maintenance work of Utilities (Boiler, Air Compressor, Cooling Tower, ETP etc.).
Maintenance and troubleshooting of all electrical equipment such as1500KVA Diesel Generator (Cummins), 10/14 MVA 33 KV Transformer, 11 KV CRT Transformers, 11KV and 33 KV switch gear panels, MCC, LT panel, VFD, Soft starter, Motor etc.
Review and make comments on vendor drawing documents related to Electrical and Instrumentation works for new modified bitumen unit-2 project, new LPG storage tank and LPG loading bay project, new drum production and drum filling station project and any other expansion projects.
Spare parts management and procurement of Spare parts i.e. technical evaluation and recommendation of material purchase offers and follow up Supply Chain Department until materials arrive at site.
2.Petromax Refinery Limited (4 years 8 months) Post: Senior Electrical and Instrumentation Engineer April 2016- January 2019
3.Petromax Refinery Limited
Post: Electrical and Instrumentation Engineer. June 2014 to March 2016
Duties/Responsibilities:
Shift in charge of Electrical and Instrumentation department to maintain the smooth operation of plant.
Instrumentation: Maintenance and operation of various process instruments such as level transmitter (Magnetrol), pressure transmitter(Yokogawa), temperature transmitter (Yokogawa, Rosemount), flow transmitter (Yokogawa, Rosemount) etc. and various pneumatic valves like as flow control valves(Flowserve), on off valves, mass flow meter etc of 2500 bbl/d condensate fractionation plant and Catalytic Reforming Unit.
YOKOGAWA SCADA- PLC system maintenance and troubleshooting (STARDOM, FAST/TOOLS, ProSafe RS) for Process Control System (PCS) and Safety Instrumented System (SIS) system of CFU, NHT and CRU unit.
Maintenance and troubleshooting of Allen Bradley PLC (SLC5/04) for heater and compressor operation and control.
Understanding of Electrical calculation, drawings and P&ID for various equipment such as motors, pumps, compressors, Distillation Column, Column Internals, Drum, Injection Packages, etc. of CFU, NHT, CRU and doing necessary modifications by maintaining the process requirements.
Operation and maintenance of 2285 KVA Diesel generator (MTU), 1600, 20 and 40 KVA UPS, Motor Control Circuit (MCC), 2500 KVA substation 2500 KVA step down and 500 KVA step up transformer, Bus Bar Trunking (BBT) system and 415 Volt LT and 11KV HT switchgear.
Operation and maintenance of Induction motors both 3 phase and single phase.
Maintenance of instrument air compressors (BOGE), SIAD V Type process compressors, 3.3 KV VFD (Fuji) for process compressors, VFD for heater blowers(ABB,Emerson) process heaters (Heatech and Born)
Fire and Gas detection system such as Flame detector (Net Safety), Gas detector (Net Safety), Open path gas detectors (Spectrex), Sounders, Beacons etc and Flare system for continuous monitoring of gas and flame.
Operation and Maintenance of Hydrogen generator (Angstrom) for hydrogen production.
Operation and Maintenance of Tank Fire detection system LHD cable and Foam package system and water sprinkler system and Tank Gauging system such as RADAR Gauge (Rosemount).
Operation and maintenance of truck loading metering skid positive displacement flow meter.
Educational Qualifications:
B. Sc. Engineering
Subject: Electrical and Electronic Engineering
Institution: Khulna University of Engineering & Technology
Passing Year: 2012
Result: CGPA 2.80 out of 4.00
H.S.C
Institution: Chittagong Cantonment Public College
Passing Year: 2007 Board: Chittagong
Result: CGPA 5.00 out of 5.00
S.S.C
Institution: Kishaloya Adarsha Shiksha Niketon
Passing Year: 2005 Board: Chittagong
Result: CGPA 5.00 out of 5.00
Professional Trainings:
1.Training on Instrumentation and Control Engineering Trainer: Engineering Staff College Bangladesh Venue: ESCB City Campus
Duration: 24 hours; Year:2021
Topic Covered:
Different Types of industrial Measurements
Control system and its application in industries
Instrument and Control drawing, Controllers, PID Tuning.
Hydraulics and pneumatics, PLC etc.
2.Training on Programmable Logic Controller and Distributed Control System
Trainer: Engineering Staff College Bangladesh Venue: ESCB City Campus
Duration: 50 Hours; Year: 2019
Topics covered:
Introduction to PLC and DCS system
Ladder logic basic and programming practice
Various Bit logic operation and programming
Different program instructions such timer, counter, latching etc
Arithmetic and math functions. Analog programming and PID Control programming and PID loop tuning
3.Training on YOKOGAWA STARDOM, FAST/TOOLS and ProSafe-RS
Trainer: YOKOGAWA, India Venue: Petromax Refinery Limited.
Duration: 10 Days; Year: December 2017
Topics covered:
Operation, maintenance and troubleshooting of YOKOGAWA STARDOM PLC both hardware and software.
Operation and maintenance of SCADA graphics software FAST/TOOLS (YOKOGAWA) and Safety PLC ProSafe-RS (YOKOGAWA) both hardware and software.
4.Training on Allen Bradley PLC RS Logix 500 with Factory Talk view ME
Trainer: CAS Electrical and Automation pvt Ltd, India. Venue: Petromax Refinery Limited.
Duration: 3 Day; Year: 2016
Topics covered
RS Logix Introduction
program ladder logic
Edit, copy and making new program
Troubleshooting of RS Logix 500
Intruduction to HMI
Making Tags and running program from HMI etc.
RS Logix 5000 introduction
Micrologix 1400 introduction and program details.
5.Training on Power Plant Operation and Maintenance and Power Generation
Trainer: Shahzibazar Power Company Limited
Venue: Shahzibazar Power Company Limited, 86 MW Gas Engine Power Plant, Habiganj, Sylhet.
Duration: 2 months; Year: 2014 Topics Covered:
Gas Engine (Genbacher), Alterntor,
Transformer, Substation, Switchgear and protection, Circuit Breakers, Relay etc.
6.Training on QMS ISO-9001- Quality Management System-Requirements
Trainer: Intertech Bangladesh
Venue: Bashundhara Oil and Gas Company Limited, Keranigonj, Dhaka. Duration: 2 days; Year: 2022
Topics Covered: Quality, QMS Principles and Requirements, Process approach, Internal and External Audit and Audit Requirements.
Professional Skills:
MS Office, AutoCAD 2D, Siemens TIA Portal, S7-200 Microwin, WPL Soft, SAP
Language Skills:
Bengali: Listening, Reading, Writing, Speaking
English: Listening, Reading, Writing, Speaking
Personal Information:
Name : Rashid Kabir
Father’s name : Harunor Rashid
Mother’s name : Altaz Begum
Date of Birth : 15/12/1989
Marital status : Unmarried.
Present address : Hazaribag, Pangaon, South Keraniganj, Dhaka.
Permanent address : Village: Khuta Khali, Post: Khuta Khali,
Thana: Chakaria, District: Cox’s Bazar, Bangladesh
References:
Muhammad Asadullah
Plant Head,
Petromax Refinery Limited (Youth Group) Mangla, Bagerhat, Bangladesh
Mobile: 017**-******
2. Prof. Dr. M. Nurannabi Mollah
Professor, Department of Electrical & Electronic Engineering Khulna University of Engineering and Technology
Mobile: 017********; E-mail: adxpkl@r.postjobfree.com
I declare that, the information given above is true. Signature is given below.
Signature Date: 14.06.2023