Michael Youngman

*** * ***** ******, ****** CA **376

adxljq@r.postjobfree.com

909-***-****

Objective: A challenging position that will utilize my experience and afford me the opportunity to learn and progress.

WORK EXPERIENCE:

Owner/Operator

Youngman’s Mechanical

September 2021 to Pesent

• Commissioning and start-up of large hospital HVAC systems and controls

• Troubleshooting operation and repairing of Johnson Metasys based control systems

• Using BACNET to integrate existing or new equipment into the Johnson Metasys control system

• Air balancing system using dampers, VFD’s, and exhaust fans to ensure air flow is moving in the proper direction for all positive pressure and negative pressure rooms

• Troubleshoot, repair, and make operational any failed components and reprogram as required to bring the system back into compliance

• Network in any new or existing NAE's into the central plant computers and confirm communication between all other BACNET devices or any other Metasys modules. HVAC Associate Instructor

UEI College

January 2021 to September 2021

• Teach advanced and air conditioning principles which includes chillers, boilers, compressors, evaporators, expansion valves, oil separators, electrical principles, refrigerant glide and chemical principles, psychometrics, and air design. HVAC Instructor

CET College

August 2019 to March 2020

• Teach advanced and air conditioning principles which includes chillers, boilers, compressors, evaporators, expansion valves, oil separators, electrical principles, refrigerant glide and chemical principles, psychometrics, and air design. HVAC Instructor

Summit College

February 2018 to December 2018

• Teach advanced and air conditioning principles which includes chillers, boilers, compressors, evaporators, expansion valves, oil separators, electrical principles, refrigerant glide and chemical principles, psychometrics, and air design. Owner/Operator

Youngman’s Mechanical

July 2014 to January 2018

• Commissioning and start-up of large hospital HVAC systems and controls

• Troubleshooting operation and repairing of Johnson Metasys based control systems

• Using BACNET to integrate existing or new equipment into the Johnson Metasys control system

• Air balancing system using dampers, VFD’s, and exhaust fans to ensure air flow is moving in the proper direction for all positive pressure and negative pressure rooms

• Troubleshoot, repair, and make operational any failed components and reprogram as required to bring the system back into compliance

• Network in any new or existing NAE's into the central plant computers and confirm communication between all other BACNET devices or any other Metasys modules. Lighting Controls Field Engineer

Acuity Brands Lighting

April 2013 to June 2014

• Nationwide start-up and commissioning of lighting control systems

• System troubleshooting and diagnostics to get the lighting controls system operational

• Ensure all devices, bridges, dimming modules, daylight harvesting sensors, scene selectors, motion sensors, gateways, LCD modules, and on/off switches are online and accounted for. Commission and program all devices per engineering specifications for proper operation

• Test all new equipment and controls for operation as designed in every area programmed.

• Make sure network integration is complete and operational on existing computers or new computers supplied

• Train customer on operation, programming, troubleshooting, warranty contact information, and walk through entire site showing how all devices are operational and programmed

Owner/Operator

Youngman’s Mechanical

November 2011 to March 2013

• Commissioning and start-up of large hospital HVAC systems and controls

• Troubleshooting operation and repairing of Johnson Metasys based control systems

• Using BACNET to integrate existing or new equipment into the Johnson Metasys control system

• Air balancing system using dampers, VFD’s, and exhaust fans to ensure air flow is moving in the proper direction for all positive pressure and negative pressure rooms

• Troubleshoot, repair, and make operational any failed components and reprogram as required to bring the system back into compliance

• Network in any new or existing NAE's into the central plant computers and confirm communication between all other BACNET devices or any other Metasys modules in the fie

Controls Technician

Johnson Controls Inc. / Outsource Telecom

March 2011 to November 2011

• Perform installation, commissioning, troubleshooting, and repairing Metasys based systems and controls

• Knowledge of SCT and CCT programming and configuration software

• Understand functions of NAE’s, FEC’s, IOM, and also familiar with UNT and VMA and slave controllers

• Able to program, commission, troubleshoot, and make full systems operational and know how to troubleshoot existing MSTP and N2 bus systems

• Able to program input and output functions, troubleshooting, and networking as well as large system mechanical design and operation

Controls Technician

Advanced Automated Systems / Outsource Telecom

November 2009 to March 2011

• Worked for a controls company installing, commissioning, and programming full building automation controls

• Worked with Johnson Metasys systems

• Familiar with Andover Continuum systems

• Knowledgeable of full DDC control functions, programming, troubleshooting inputs and outputs, and operation of all building controls

• Strong troubleshooting building controls, security systems, fire systems, and all lighting related energy management systems

• Perform troubleshooting mechanical problems on newer or older equipment

• 608 EPA Universal Certification, 609 EPA Mobile Air Conditioning Certification, and R- 410A high pressure refrigerant certification

• Registered with the State of Texas in Air Conditioning and Refrigeration Registration number 36360

Senior Facilities Tradesperson Specialist Lead

BAE Systems / DARPA and DOD Research and Development November 2003 to July 2009

• Serviced specialty equipment- composite autoclaves, cascading low temperature environmental chambers, 400 Hz generators, and clean room maintenance and continuing operation

• Performed full in-house HVAC repairs from 3 to 50 ton package and up to 100 ton chillers, water tower maintenance, water treatment monitoring and repair

• Electrical troubleshooting, 480 VAC main switch-gear maintenance and thermal scanning, running conduit, and setting transformers and panels as required

• RO, DI, and WFI water maintenance and monitoring for job specific requirements

• Daily equipment review and documentation for DARPA and DOD certifications

• Reviewed R and D equipment for process gases and electrical requirements, installation, monitoring, and documentation of gas purity, and electrical fluctuations not grid related

• On call requirement 24/7 if not on approved PTO

• Leader of first response team and trained in adult CPR/AED, first aid. Owner/Operator

Youngman’s Mechanical (Contractor to Clean Rooms West) January 2002 to November 2003

• Involved in all aspects of bidding, running, and operating an HVAC company

• Performed commercial and residential repairs, swap-outs, and full ducted new installs

• Specialized in multi-circuit DX piping; complete control packages, air showers, clean room certification, electrical troubleshooting, PLC’s, preventive maintenance, as well as all areas of residential heating-cooling troubleshooting and change out’s Senior Technician

Clean Rooms West Inc.

November 1998 to January 2002

• Involved in all aspects of clean room construction and certification

• Knowledge of DDC and PLC controllers, start up and commissioning of chart recorders, and designing and building multitask relay logic control panels

• Worked with up to 100 ton chillers, 25 PSI boilers, gas and electric heaters, gas and electric humidifiers, AC and DC VFD’s, and AC and DC motors

• Able to do layout, fitting, and welding of split systems from 2 ton to 100 ton

• Perform commissioning of DDC control packages with all sensors including 4 to 20 Ma, RTD’s, thermocouples, VDC sensors, and have a full understanding for troubleshooting any input and output controller functions

• Factory trained on Kathabar humidification/dehumidification systems for temperature, humidity using microbial lithium chloride brine

• Familiar with Novar, Johnson, Trane Summit, Robert Shaw, Johnson DX9100 and Metasys controllers

Senior HVAC Technician

Enviroflex

November 1995 to November 1998

• Involved in all aspects of clean room construction

• Duties included air balancing, certification, setting and piping DX and water coils, electrical and mechanical troubleshooting and warranty work on existing clean room. Firefighter 1

California Department of Forestry and Fire Protection (CAL Fire) July 1984 to November 1992

• Certified Fire Fighter 1 by the Office of the State Fire Marshal

• Responded to alarms, drives and operates equipment and related apparatus and assists in the suppression of fires, including rescue, advancing lines, entry, ventilation and salvage work, extrication and emergency medical care of victims.

• Extracted stranded victims from dangerous situations, including burning buildings

• Acquiring more professional knowledge and skills by taking part in trainings, workshops, self- education

• Keeping equipment in great condition and providing regular maintenance, inspection, and repair Vocational Schooling

December 1999-December 1999

Johnson Controls Institute Learning Services

Denver, CO US

Training: Direct Digital Controls

Studies included direct digital controls, unitary controls, VAV controls, DX 9100 and Metasys, networking and troubleshooting controllers

December 1994-November 1995

The Refrigeration School

Phoenix, AZ US

Training: Electro-Mechanical Technologies

Studies included fundamentals of residential and commercial air conditioning, low temperature refrigeration, heat pumps, chillers, boilers, and gas, electric and oil fired furnaces and welding. Also included was residential and commercial electrical, including conduit bending, motor troubleshooting and controls

April 1992-September 1993

National Tooling and Machinist Association

CA US

Training: Machining

Study of reading measuring devices, conventional and CNC mills and lathes, reading blueprints and trigonometry

May 1985-November 1985

Airco Technical School

Long Beach CA US

Training: Welding Study of MIG, TIG and stick welding, Oxy-acetylene welding, plasma arc cutting, calculus, trigonometry, and reading blueprints

Contact this candidate