MUHAMMAD IQBAL

Address: Ezdan** al Wukair Qatar

Contact: +974-******** +974********

e-mail: adx746@r.postjobfree.com SKYPE ID : muhammadiqbal686

QATAR DRIVING LICENCE

INSTRUMENTION SUPERVISOR

EXPERIENCE: 10 yrs.

OBJECTIVE

Total 10 years above experience in UAE,PAK&QATAR,Commissioning,inspection,testing, calibration &Maintenance PM/CM of latest instrumentation &control system for chemical l, petrochemical. power plant &water treatment plant,To become a part of a professional team in a well-reputed organization that provides good working environment and personal grooming in career leading to higher management position

I have a good knowledge about health safety and environment; I have attended class room training about permit to work procedure and electrical safe work practice. I am full confident in my field.

PERSONAL DATA

Type Of Visa Work visa

NATIONALITY : PAKISTANI

DATE OF BIRTH : 14-06-1990

RELIGION : ISLAM

Passport # : JE1333162

EDUCATION

•Diploma of Associate Engineer (ELECTRONICS) 3 YEARS

KEY SKILLS

Soft Skills

•Excellent Communication Skills

•Team Leader & Team player qualities

•Group Presentation Skills

•Technical Presentations & Documentation

•MS Office.

Technical/ Analytical Skills

•PSM (Personal safety management)

•Finding Innovative Solutions

•Problem solving & Auditing techniques

NOV 2018 too TILL METITIO QATAR

WORKING IN METITO INTERNITIONAL COMPANY IN QATAR AS A INSTRUMENT SUPERVISOR Doha south STW plant ( ASGHAL PTW)

JAN,2017 to March,2017)

DESCON,QATAR

Worked in DESCON Engineering company in Qatar Chemical limited as a LEADWORKER (QCHEM)

(25-05-2015,24-10-2016

AGRI TECH FERTILIZER

WORKED IN PAK AMERICIAN FERTILIZER INDUSTRY IN PAKISTAN AS A SENINOR INSTRUMENT TECHNICION.

10-07-2013,04-05-2015

SSSP PROJECT,UAE

WORKED AS A INSTRUMENT TECHNITION IN SSSP PROJECT IN SHAH, ABU DHABI, UAE(AL HOSN GAS)

16-09-2012,09-07-2013

ADCO,UAE

WORKING AS A INSTRUMENT TECHNITION IN SAS PROJECT ABUDHABI UAE(ADCO)

27-01-2012, 15-09-2012

ADCO,UAE

WORKED AS A INSTRUMENT TECHNITION IN BTG PROJECT HABSHAN ABU DHABI UAE(ADCO)

03-12-2009, 10-08-2011

Worked as instrument technician with SIEMENS at 234 MW CCPP, Murideke road Shakhu pora project(PAKISTAN0

12-08-2009, 11-11-2009.

I completed three month internship from PAK AMERCIAN FERTILIZER Company limited Daud Khel (PAKISTAN) from 12-08-2009 to 11-11-2009

EQUIPMENT USE

HART communicator 475, 375,Fluke Multi tester, PRESSURE CALIBRATOR 719 PRO 300G,PROCESS CLAMP METER 772,HART LOOP CALIBRATOR 709H, DRAGGER POLYTRON 7000 SERIES AND 8000 SERIES,Druck 610 Pressure Calibrator, DPI 603,FACP ZETON SERIES,FM -200 FIRE SUPPRESSION RELESE SYSTEM,IR 4000M GAS DETECTOR,HONEYWELL XNX TOIXIC GAS DETECTOR,UV/IR 3301 DETECTOR, O2 GAS ANALYZER,AMETEK 888 ANALYZER, BUDENBERG Deadweight Tester, BUDENBERG Comparator, DRUCK Deadweight Tester, PULSAR Temperature Dry Block Calibrator DRUCK 725communictor, Fluke 754 Multi-Tester,DC POWER SUPPLY EXRECH,DEWPOINT METER ELECTROMETER,LUX METER TESTO,MANOMETER MERIAM,MEGGER,CLAMP METER HIOKI,EARTH TESYER MEGGER,DECADE RESITANCE BOX,TACHOMETER EXTECH.CCTV,DCS SYSTEM YOKOGAWA AND HONNEYWELL SIEMINS S7 200 &400,GE PLC

Duties & Responsibilities: • Instrument Maintenance (PM /CM ) (HART&FF), Instrument Calibration,Trouble Shooting,Critical Loops Test, Loop checking, Commissioning, Trouble shooting,Maintenance Assemble disassemble overhauling all types of control valves like Electro pneumatic control valves, Motorized valves, Familiar with drawing like ILD,P &ID,PFD.DATASHEET .Logic diagram wiring diagram,Functional Diagram etc. Arrange the spare parts and follow the job during the installation and calibration in SAP, Closing all the work orders after completion of the job in SAP . • perform &testing and calibration PH analyzer,dissolved oxygen analyzer,conductivity analyzer, turbidity analyzer.TDS sensor,chlorine analyzer testing and calibration

• Glanding termination, Pre-commissioning, Testing and commissioning to the client as per Engineer/Supervisor’s schedule. DCS SYSTEM • Perform loop checking and loop setting to the client as per Engineer/Supervisor’s schedule.

• Perform wire checking of field instrument to junction box up to Control Room.

• Termination of instrument cables, transmitters, and junction box crosses connection on marshalling panels.

• Field instrument installation based on instrument location plan and Piping instrument diagram (P & ID).

• Perform wire checking of field instrument to junction box up to Control Room.

• Servicing and Calibrating of control valves

• Servicing of SOVs, Regulators and other accessories in control valves

• Perform wire checking of field instrument to junction box up to Control Room. • Glanding termination, Pre-commissioning, Testing and commissioning to the client as per Engineer/Supervisor’s schedule. DCS SYSTEM

• Termination of instrument cables, transmitters, and junction box crosses connection on marshalling panels.

• Calibration and stroking of control valves such as globe valve, Emerson posy flex F20 and fisher.

• Perform all the job, as advised by Supervisor and gave daily production reports.

• Field instrument installation based on instrument location plan and Piping instrument diagram (P & ID).

• Loop checking of instrument controller, such as Honeywell, smart transmitter and control valves stroking and functional testing.

• Wire checking and continuity checking from instrument junction box to control panel Extensive knowledge in FM 200,CO2(HP&LP),FIRE TRACE,DELUDGE SYSTEM,FIRE ALARM SYSYTEM,

• O2 DETECTOR CALIBRATION AND SERVICING .DRAGGER POLYTRON -7000 SERIES CONFIGURATION CLIBRATION AND ALRAM SETTING GAS SENSOR GENRAL TYPE 4000M AND HONEYWELL XNX TRANSMITER H2 .H2S.SO2 AND HYDROCARBON GAS.

• Installation, termination and testing fire alarm panel, smoke detector,gas detector,Horn, becone

• Work on different units for trouble shooting of instruments faults/problem to process dept. Toxic gas detector calibration and servicing .DRAGGER POLYTRON 7000 SERIES. Smoke detector heat detector and manual call point completed maintenance and servicing.(photo electric type and beam type.

• Pre-commissioning, Testing and Commissioning, Pre and Start-up and operation and maintenance on the systems and modules such as: Fire & Gas, Safety Instrumented System (SIS), Emergency Shutdown (ESD), Process Shutdown (PSD), Process Control System (PCS)

• configuration and calibration HONEYWELL XNX GAS DECETORS H2,SO2 GAS, H2S GAS AND HYDROCARBON GAS

• Performing of control loop checking, calibration,, troubleshooting, verification, rectification, modification and simulation of various instrumentation and control instruments.

• Testing of fire alarm, smoke detector

• UV/IR flame detector servicing and functional checking.(GM AND DET-TRONICS X3301,FL3130

• Fire water system of deluge and sprinkler system maintenance related instruments calibration and maintenance .(TYCO) AND ZITON

• Wire checking and continuity checking from instrument junction box to control panel.

• On site validation/ calibration PT, FT, LT and TT.

Knowledge about the different type of Hazardous involved in the work area and necessary precaution to be carried out for safe work.

HSE COURSES & TRAININGS

•CONFINED SPACE ENTRY training by third party CERTIFICATE (ENERTECH QATAR.)

•Permit to work system.(including hot work, cold work & entry in confined places) ( ENERTECH QATAR.)

•Firefighting training t certificate by third party ENTERTECH QATAR

• LOCK OUT TAG OUT training by third party CERTIFICATE (ENERTECH QATAR.)

•AGT training by third party CERTIFICATE (ENERTECH QATAR.)

•CHEMICAL HANDLING training by third party CERTIFICATE (ENERTECH QATAR.)

•FIRST AID training by third party CERTIFICATE (ENERTECH QATAR.)

•Incident reporting and recording procedures.

•Use and importance of various types of Personal Protective Equipment

•Emergency Response Plan (ERP)

Contact this candidate