Leo Villalobos

Richland Hills, TX ***** • Cell: 817-***-**** • adx4td@r.postjobfree.com

Professional Summary

To expand and advance within a growing company that will provide the necessary skills for success and advancement within the company. Always strive to exceed goals and company expectations.

Skills/ Certifications

NDT Penetrant level I Inspector

Certified Source Inspector for Bell Helicopter

Pyrometry certified for Heat treat and forging furnaces.

Internal Audit

Certified Programmer for PC-DMIS/ Calypso MCOSMOS/MICAT software

ASME Y14.5-2004 & ASME Y14.5-2009 GD&T BASICS (Geometric Dimension & Tolerancing)

Certification training for ASME Y14.5-2009 GD&T

Asset management of customer's measuring equipment; performing onsite calibration.

Excel, Microsoft Office

ISO 9001 / AS-9100 / AS-9102

Laser Tracker (Leica)

ISO 13485 Medical Devices

21CFR820 FDA

Work History

Sr. Quality Inspector/ CMM Programmer, 07/2021 to Current

Neurolens -Medical devices – Coppell, TX

I helped the Quality Manager established the Quality Inspection department, editing and creating Quality Procedures, setting up an area for the Quality Inspection area, purchasing all tools needed that will help me perform my job and help develop an Inspection Log.

Help develop and manage quality Inspection Procedure (QIP), that will indicate what to inspect for Incoming, In-process and Final Inspection.

Responsible for Inspecting Incoming, In-process (Sub-Assembly), Final Assembly Inspection.

Perform FAI on parts when needed and evaluate any FAIR provided by supplier.

Initiated Non-Conforming Material Request when found parts that did not conform to specification.

Established and maintained the management of calibration/ preventive maintenance of equipment for the entire company by arranging with approved calibration laboratories to calibrate our equipment. Ensuring that all equipment files are maintained for compliance with FDA QSR/ GMP and ISO 13485.

Initiate Document change request (DCR) to make changes or develop a new procedure.

I serve part of the Material Review Board (MRB) and assist in the disposition of parts.

Cross train Quality Engineering (Q.E), to help develop my skills.

Assisted mechanical Engineer (ME) and R&D with helping develop drawings utilizing ASME Y14.5 standard and GD&T.

Provide a monthly report for Inspection quantities for the month and any discrepancies found to the Quality Manager.

CMM Programmer/ Sr. Inspector, 01/2020 to 09/2021

Abbott Laboratories Diagnostics Division -Medical devices – Irving, TX

Creating CMM Programs both offline and online using a collection plan that identified key features to Inspect developed by engineering.

Experience using Contura and O-Inspect (Tactile & Vision system).

Verified parts met the collection plan and drawing prior to sending parts to warehouse or assembly line.

Perform a First Article Inspection and Engineering Evaluation when required. Utilize the Coordinate Measuring Machine (CMM) and hand tools to obtain measurements.

Collaborated with other CMM Programmers to do Validation and was part of other studies such as Gage R & R and Probe Uncertainties.

Trained other Inspectors how to use hand tools properly and how to inspect parts on a surface plate.

I was tasked with the more complex programs when other CMM Programmers had a hard time creating the CMM Program.

I multitasked when needed, creating CMM Programs and as well as operated CMM to help the Quality Inspection team.

Initiated a program to palletize CMM programs to minimize the lapse time of loading and unloading parts from fixture. It saved the Company time, money and optimized output.

Q.C Inspector/ CMM Operator/CMM Programming, 08/2017 to 12/2019

PCC Aero - Progressive - Aerospace – Arlington, TX

Verifying that the parts meet customer's requirements as specified on customer drawings.

Perform a First Article Inspection when necessary or required by the customer. In the process of inspection, we utilize the Coordinate Measuring Machine (CMM) and hand tools.

Certified CMM Programmer for PC-DMIS and MCOSMOS/ MI-CAT software.

Creating Programs for CMM using PC-DMIS software and CATIA software.

Experience using Global, Leica, LK G80 and DEA SLANT.

Operating CMM and running programs from various customers such as; Lockheed, Boeing Commercial, Airbus, Gulfstream and Spirit Aero.

Verify that the specifications from the customer are up to date.

Operate and Program on Laser Tracker (Leica) using PC-DMIS software.

Utilizing Laser Tracker (Leica) to create programs, Inspect CNC fixtures prior to releasing to production as well as the part throughout its machining process. It’s used as a manufacturer verification of machined parts.

Utilize and have a good understanding of the ASME Y14.5-2009. Using ASME Y14.5 as a guideline for GD&T practices.

Utilize the ISO 9100/ AS-9100 and AS-9102 (FAI) as the standard for quality management. Very familiar with the standards that are used as the international quality standard for aviation, space and defense industry.

Level II Calibration Technician, 07/2012 to 11/2017

Trescal, Inc. – Metrology– Irving, TX

Calibrate Dimensional, torque, pressure, temperature, and physical equipment.

Served as a resource to train entry level Calibration technician.

Inspected fixtures and/or parts using a CMM and hand tools upon request for customers.

Performed onsite calibrations as requested by customers.

Certified for Advance CMM Programming for MCOSMOS/ MI-CAT software.

Utilized a Mitutoyo Vision System to create programs in order to Calibrate certain customer tools.

In charge of calibrating Medtronic equipment. I was delegated to manage calibration for the entire company as an onsite Calibration Technician.

Thorough experience using ISO 17025 and ANSI/NCSLZ-540 specifications.

Head Layout Inspector/ Calibration Technician / Quality Assurance / NDT, 02/2005 to 07/2012

W. Pat Crow Forgings - Aerospace – Fort Worth, TX

Level I Penetrant Inspection certified.

Calibrate measuring equipment such as; caliper's, height gage, micrometers, dial indicators, depth gages, temperature controls (furnace), barber Colman/Memo Cal 2000, DPR3000, DPR250 (chart recorder), Honey well chart recorders and controls.

Six years of experience on CMM using PC-DMIS and 3 years of experience of programming. Two years of CMM programming using software to MI-CAT, Mitutoyo Model CRYSTA.

Utilize and have a good understanding of the ASME Y14.5-2009. Using ASME Y14.5 as a guideline for GD&T practices.

Utilize the ISO 9100/ AS-9100 and AS-9102 (FAI) as the standard for quality management. Very familiar with the standards that are used as the international quality standard for aviation, space and defense industry.

Interpreting customer drawings and ensuring drawings are up to date.

Fully inspect and measure the cast to customers drawing prior to release for production.

Utilize multiple methods of inspection using hand tools such as calipers, height gage, micrometer, indicators, surface plate, Optical Comparator, protractor, Sine plate and other measuring tools.

Perform First Article Inspection on finished parts at customer's request.

7+ years of dimensional Layout OJT from BHT Approved Layout Inspector.

Run verifications to assure all equipment is running property within customer’s specification of liquid penetrant and magnetic particle Inspection.

Education

High School Diploma: South Hills High School- 2002

South Hills High School Fort Worth, TX / Tarrant County College - Fort Worth, TX

Graduated in the top 10% of my graduating class.

3.7 GPA

Contact this candidate