Process Engineer Front End

Monika

****, ******* ****, ***** *****,GA

+1-470-***-**** E-mail:

*******.******@*****.***

Process Engineer

Summary: Monika has more than 15 years of combined experience in process design and engineering for Refineries, Petrochemicals, Utilities and Upstream Oil and Gas facilities. She has significant experience in Basic Engineering for Process Design Package development, FEED package development for both green field and revamp projects, Detail Engineering for various process units in large EPC projects and Surge Analysis. She has exposure to various codes, standards and design engineering practice and has dealt with number of clients, licensors and EPC contractors. Experience in process engineering including material and energy balance, computer simulation using Hysis & PRO-II, development of PFD's, P&ID's and equipment sizing and equipment specification sheets, hydraulic calculation Equipment Datasheet Preparation (Vessels, Pumps, Heat Exchangers and Miscellaneous Process Equipment). Relief Load Analysis & Load Calculations for various overpressure scenarios, Instrument Process Datasheet preparation (Control Valves and PSV). Preparation of MSD. Specific Experience:

Fluor Danial India Pvt Limited, Process Specialist III (From Aug 2011 – Sep 2021), Gurgaon, India

● In-house Project

Monika is responsible for preparation of design documents such as Process Design Criteria, Isolation Philosophy, Drainage Philosophy, Relief Philosophy and ESD Philosophy for all Indian Projects.

● BPCL Polyols Petrochemical Complex, BPCL Kochi Refinery (Area Lead) Responsibility extends from Licensor evaluation for Propylene Oxide Polyols and Ethylene Oxide/ Ethylene Glycol Unit; Propylene Glycol; Ethylene Recovery and Cumene unit. Ms. Monika was also responsible for Utility System configuration and configuration / Basis of Design for Storage area Product handling system and Product dispatch facility during Licensor selection Monika is area lead of Cumene Unit during feed stage. She is also responsible for PSV review for all Process units. She also worked on development of critical design document like PDC, BEDD, Isolation philosophy and Sparing philosophy. She also worked on propylene oxide unit and Ethylene Recovery unit.

● Fawley Strategy (FAST) Project, Southampton, United Kingdom (Feed + EPC) Monika is working in Hydrogen Unit. she is responsible for DP/DT development, P & ID preparation, Equipment sizing and datasheet preparation, utility summary and vendor data checking for Equipment and pumps.

● Inter Pipeline Propylene Ltd, Polypropylene Project, Strathcona County, Alberta, Canada (Area Lead)

Working as Technical lead. She is responsible for front end engineering of North America Polypropylene

- Licensor scop and Utility Area. She is responsible for PFD development, P&ID development, hydraulics, PSV scenario analysis and relief load calculation, instrument datasheet for Licensor scope.

● BASF Total Petrochemical LLC Fluor, C2 Debottlenecking Project, Port Arthur, Texas, United states The major task was to perform / update the PSV calculations for the Debottlenecked capacity. Other tasks involved updating PFD, P&IDs, equipment specs, conducting HAZOPs /SHE reviews and other engineering deliverables.

● DAK America Phoenix, Mississippi, United States (Area Lead) Ms. Monika is responsible for several key areas of new/modified scope such as Polymer Transfer, Modifications to return TiO2 and OB additives to service, New Blue Toner additive system, EG Recycle modifications to route L31-01-VE-57 to R34-01-TK-18 A/B, and return material from R34-01-TK-18 A/B to L21-01-VE-28., Developing the new/modified scope P&IDs to Approved for Design (AFD).

● Confidential, Redwater, Alberta, Canada (Area Lead) Fluor provided services for front-end engineering and design services and a lump sum turnkey (LSTK) price for a grass roots polypropylene (PP) facility. Ms. Monika is working as technical lead. She is responsible for front end engineering of North America Polypropylene -Non-Licensor scop and Utility Area.

● Suncor Energy Oil Sands Limited Partnership, East Tank Farm Development Project, Fort McMurray, Alberta, Canada (Area Lead)

Ms. Monika is working as an area lead. She is responsible for tank venting system, Tankage vapor blowers and Natural Gas Vent Combustion Units. Visited Calgary Canada for participation in PID review.

● Qatar Petroleum/Shell Global Solutions International B.V. Fluor, Al Karaana Petrochemicals Complex (AKPP), Ras Laffan, Qatar

Ms. Monika is responsible for front end engineering of Linear Alpha Olefins (LAO)-Utility Area. She is responsible for Process Control narratives, Safeguarding Memorandum, Safeguarding Narrative, and Instrumented Protective Function (IPF) Narratives for LAO Plant.

● Pemex Refining, Tula New Refinery Tula, Hidalgo, Mexico (Area Lead – Tankage) Ms. Monika is working as an area lead. She is responsible for front end engineering of offsite Tankage Area. Developed Design Basis, PFDs, MSDs, P&IDs, Process Description, Optimization Study etc.

● Shandong Dahai Group Co. Ltd., 3,000 TPA Polysilicon Complex, Dongying, Shandong, China Ms. Monika carried out Hydraulic calculations using Fluor software PALS. -Calculations and duty specifications for Ethylene Glycol solution chiller package & Lime System Package for the plant. Updated P & ID received from GT Solar. Prepared Instrument datasheets such as Control Valve, Restricted Orifice

& Analyzer. Development of IOU P&IDs.

IOT Design and Engineering India Pvt. Ltd., Lead Engineer (07/2010 - 08/2011) Gurgaon, India Socar Aurora Fujirah terminal Project: Ms. Monika carried out Complete surge analysis for the pipeline

(2.5 km) from storage tank to ship loading section with different scenario with the help of PIPENET. -In Force calculation on various elbows,tees and different nods . Paradip On Build-Own-Operate-Transfer

(BOOT) Basis, (Orissa, India): Ms. Monika was responsible for PFDs P&IDs preparation and updation, Review of Licensor documents, Development of P&ID’s, Hydraulic Calculations for Line Sizing, Pumps and compressor, Preparation & Review of Process Datasheets, Equipment Sizing etc.,Consistency check between Equipment list, Equipment Process datasheet and P&IDs., P&ID mark-up and preparation of Unit Interconnection P&ID,Utilities load calculation and Utility Distribution Diagram preparation, Line list

& Electrical Heat tracing list preparation& id preparation and updation Control Valve Sizinge & Alarm and Trip Register

GS Engineering & Construction India Pvt. Ltd., Process Engineer (05/2007 - 07/2010) Gurgaon, India Projects: Ruwais Refinery Expansion Project Package 2, Takreer (Deputed in GS Korea) on WCN Unit. Ruwais 4th NGL Gasco Project. NHR Tatarstan Project, Russia (Deputed in GS Korea) on Parex and Benzene Toluene Fractionation unit.

Brief Outline of duties: Preparation of ITB Summary, Equipment list, Consistency check, Pump and Compressor Hydraulics, Single and Two phase line sizing, PFD Preparation and updation, P & ID Preparation and updation, Utility summary, Design Basis, B/L Summary, Interconnecting P & ID Preparation, Equipment Data sheet, Vessel Sizing, Criticality rating Calculation. Line List, utility flow diagram updation.

Multitex Filtration Engineers Ltd., Process Engineer (08/2006 - 05/2007) Delhi, India Ms. Monika was involved in Sizing of Pressure Vessels (Two and Three Phase Separator etc.) Sizing of Water Bath Heaters. Process & Mechanical design Pressure vessels, Water bath Heaters, filters etc, Estimation of Pressure vessels, Water bath Heaters, Separator, filters etc. Responsible for preparation of PID, PFD, Lines and equipment sizing of process Equipment, process piping etc. Budgetary costing/project costing.

Alchem International Ltd., Graduate Engineer Trainee (01/2006 - 08/2006) Faridabad, India Ms. Monika was involved in Operations of equipment like extractors, Distillation column, Centrifuges, RDU, Glassline Reactors, Cooling Towers, Chillers and pumps etc. Actively involved in project execution. Exposure to standard codes like IS, BS, ASME, Hazardous Area classification as per IS, IEC, handled equipment sizing &selection. Responsible for preparation of PID, PFD, Lines and equipment sizing, erection and commissioning of process equipment, process piping. Education Qualification

B.E Chemical (70%, 2000-04), C.R.S.C.E Murthal, M.D. University, Haryana, India

Contact this candidate