Heavy Equipment Civil Engineer
Resume:
Construction Inspector
T.Y. Lin International
Location: Windsor, ON, Canada
Michael A. Cruciano
St. Clair Shores, MI 48080
******@***.***
In the civil department at various engineering firms, my responsibilities entailed meetings with the owners of proposed project, daily reports, meeting with municipal civil engineering department, civil/site contractors, site/ road Inspection/design/engineering (paving, utilities, earth work, grading), railroad track design/Inspection, CADD, civil specs., Topo/field/site investigation, civil estimating /quantity take-off’s, pre-bid meeting’s, zoning investigation relating to the design of future projects, civil shop drawings. I also have interacted with all the engineering departments and obtained the vast knowledge of mechanical, electrical, structural, and architectural design, architectural engineering, and the construction of the projects.
Software: Cad Micro-station V8 XM Edition, Auto Cad 2010- 20 yrs.
Specifications: Spec link
Microsoft Word/ Excel
Field Book
Phocro
Certified: OSHA 30hr
Certified: 3010 Excavation, Trenching and Soil Mechanics
Certified: ISO 9001
Certified: Certified Turbine Tower Climbing
Certified: Ground Disturbance - Supervisory
Education: Osborn High School, Detroit, Mi.
Lawrence Tech, Southfield, Mi.
Architectural Engineering – 3 yrs.
Field work experience consists of topo survey, and investigation of the new and existing sites/roads/Airport sites/Railroad Tracks for future use relating to the design of projects. On site, solving civil field problems that happen during the civil, site construction part of projects, interacting with civil contractors and owner of projects. Concrete PSI (3,7 & 28 day), slump testing, and sub-base Density testing, coordinating of material testing, material qualities, water main installation and pressure testing, etc. Knowledge of the used of trucking and earth moving equipment. Knowledge of the construction of Turbine Windmill, Sub Station construction, Direct Burial Electrical Lines, Transmission Lines, inspection of roads, culverts, turbine bases, turbine pedestals (re-bar and concrete pour), electrical grounding and electrical conduits etc. Following the testing of concrete pours and the testing of the placement of road materials. Attending project POD meetings.
Office work experience consists of storm and sanitary design, earth work, paving (concrete and bituminous), grading design, utility, railroad tracks design, retaining walls, footings, columns, beams, truss, structural detailing, writing specifications, civil shop drawings, interoffice engineering departments relating to the engineering, design of project, pre-bid meetings. Meeting contact with the client/owner, municipal engineering and contractors performing the civil/structural construction part of protects.
Work history:
Onyx-Enterprise, Inc.
Inspection/Quality control of the repaving of 7.8 miles of I-75 in Michigan. The project is the removal of existing bituminous wearing course and the replacement of the bituminous wearing course. The project also includes removal and replacement of MDOT guarding rail at various locations along the 7.8 miles I-75 project. At various locations of the I-75 project storm water curb outlet are to be replaced per MDOT design/specifications. I interacted the superintendents, heavy equipment operators, labors, and material testing lab personal.
May 2022 to present
Onyx-Enterprise, Inc.
Inspection/Quality control of various locations in the City of Detroit, MI streets. The projects entailed the:
1) Removal of the bituminous wearing course, the removal of existing concrete curb and the removal of existing underground utility frame and cover structures.
2) The replacement of the bituminous wearing, concrete curbs, and replacement of new utility frame and cover structures. While on site at various locations in the City of Detroit, MI streets projects. I interacted the superintendent, heavy equipment operators, labors, and material testing lab personal.
Another project that during this period was the Inspection/Quality of speed/traffic control speed bumps, a total of 1800 installed constructed at various locations thru out the City of Detroit, MI. Which entail the removal of existing bituminous per design, replacement of bituminous per the design/specifications.
May 2021 thru Dec 2021
RES Americas Inc.
Rainier, Washington/ Tioga, North Dakota/ St. Joseph, Missouri
Inspection/Quality control of storm sewers, Gravel Road construction also entailed DCP and Proof rolling by testing sub contactor, concrete foundations, Re-bar for base and pedestal of turbine, first section of Turbine Tower erection, Quantities (design built), with sub-contractors, earth/concrete testing company, quality control, Daily Reports and POD meetings. Surveying sites for proposed roads and Wind Turbine Sites.
1) Rainier, Washington -Total amount of Turbine Windmills on project, 38 (25 miles of gravel road construction) Nov. 2019 to June 2020
2) Tioga, North Dakota -Total amount of Turbine Windmills on project, 71 (45 miles of gravel road construction) Note: This project entailed doing Civil inspection & ‘Punch List’
June 2020 to Sept 2020
3) St. Joseph, Missouri -Total amount of Turbine Windmills on project, 89 (50 miles of gravel road construction) Note: This project entailed doing Civil inspection & ‘Punch List’
Sept 2020 to Feb 2021
Civil Engineering Solutions, Inc.
Lyon Township, MI
Inspection/Quality control of site work at proposed sub-divisions, industrial sites. The Inspection/Quality control entailed ensuring that all underground utilities (storm sewers, sanitary sewers and water mains meet the specifications/design/engineering of project. While on site interacting with site contractor and earth work testing personal, also working with the municipal personal for final pressure testing of water mains to ensure it meets design/specifications. Witnessing of the pressure testing of sanity sewer was performed in house and with site contractor. The projects also included the inspection of the earth work (cut and fill) and the paving of the streets, parking lots of the proposed projects. The daily reports which included quantities of what was completed per that day of construction, material type that was used/installed, manpower, equipment used and field drawing. The Erosion and Sedimentation control included the installation, the maintenance of the Erosion and Sedimentation control was being kept up to the design/specifications of the project and per city design/specs. At the end of the project a punch would be created to correct any construction problems that may have occurred.
Note: If problem should arise during construction of project the design engineer/surveyor would be notified to resolve the field problem.
August 2017 to October 2019
RES Americas Inc.
Cordell, OK / Clovis, NM / Chapman Ranch, TX / York, MO
Inspection/Quality control of storm sewers, Gravel road construction also entailed DCP and Proof rolling by testing sub contactor, concrete foundations, Re-bar for base and pedestal of turbine, first section of Turbine Tower erection, Quantities(design built), with sub-contractors, earth/concrete testing company, quality control, Daily Reports. Surveying sites for proposed roads and Wind Turbine Sites. Daily reports, daily pot meetings.
1) Cordell, OK -Total amount of Turbine Windmills on project, 37 (25 miles of gravel road construction)
2) Clovis, NM - Total amount of Turbine Windmills on project 141 (80 miles of gravel road construction)
3) Chapman Ranch, TX - Total amount of Turbine Windmills on project 81 (40 miles of gravel road construction)
4) Rockport, MO - Total amount of Turbine Windmills on project 150 (45 miles of gravel road construction)
May 13, 2015 to August 2017
RES Americas Inc.
Sargenta, MN
Inspection/Quality control of storm sewers, road construction, concrete foundations, Quantities (design built) interacting with sub-contractors, quality control, Earth/concrete testing company, Daily Reports for the Turbine Windmill Project.
1) Total amount of Turbine Windmills on project, 100. (Approximate 25 miles of gravel road construction) Aug. 4, 2014 to Dec. 23, 2014
Northstar Paving & Construction Inc., Soldotna, AK
Civil Inspection, quality control, estimating (Topcon 3D Office software), surveying,
Field design. (Approximate 3 miles of road construction)
May 1, 2013 to Aug. 3, 2013 Project location, McGrath, Alaska
Thomas/Wright Inc. Portland, OR.
Civil estimating/ Civil Engineering/Inspection/topo surveying, Inspection/Quality control of a 1500 ft. length of erosion river bank project.
June, 1.2012 to Oct. 1, 2012, Project location, McGrath, Alaska
BEI Associates Inc., Detroit, MI
Civil design/ Civil Engineering/civil field investigation/railroad design/ topo survey
Dec 2006 to Jan 2011
Albert Kahn Associates, Inc. Detroit, MI
Civil design/Civil Engineering/field investigation/railroad design/Airport Design/Field Construction, Inspection
Mar 1988-May 2005
Camp, Dresser and Mckee, Boston, MA
Civil engineering/Waste Water design/field investigation.
On Site at Detroit’s Waste Water Treatment Plant
Feb 1985-May 1989
A few projects:
McGrath, Alaska, Emergency Watershed Project
On site in McGrath Alaska, doing the inspection and quality control for a Watershed Project.
The Project entails 1500 feet length of rip-rap material lining the river bank, with a change of elevation of 28’. The rock was being installed for erosion control of the river. As inspector, quality control I interacted with federal government, city personal and contractor. My responsibility was to accuse that project was being constructed correctly. On site I followed the project, with contractor and material testing personal for the removal and installation of materials as per specifications and drawings. My Daily Reports included: Work Review/Inspected, Deficiencies, Corrective Action, Narrative and Pre-Work/QC meetings Topics.
McGrath, Alaska, Road Project
On site in McGrath, Alaska doing the inspection of 1.6 miles of a road project. The project included the widening of road with select borrow material, 4,000 feet of new culverts, earthwork geotextile fabric, sub-base and surface course material. I interacted with the city personal, civil contractor, material test personal and the Federal Government engineer. On the project I took material field samples, did on site quantity take-offs, surveyed, change orders and made sure the project was constructed correctly to the plans and design.
Providence Hospital-Novi, MI
Civil engineer of the project which was the development of an existing golf course to an out- patient clinic. The project consisted of the widening of Novi rd., Novi, Mi. Helicopter landing pad to receive emergency cases, visitor/patient parking, truck access to site. Design of storm and sanitary sewers, gas mains, city water mains, storm water detention, grading, paving of site. Writing of civil specs. Interacting with the engineering depts., project owner, city inspectors/engineers, civil contractors, shop drawings.
Ford Motor Co.-Wixom, MI
Civil engineer of the project, the civil design entailed truck dock design, utility design, grading/paving, truck trailer “just in time” storage area, 350 trailer spaces. The project also included train track design/switch locations/tune outs/bumper stops/radius data of track, data/elevations top of rails. Civil specs, civil details, shop drawings. Interacting with engineering dept’s, protect owner, city inspectors/engineering and civil contractors.
Miles of Streets-Detroit, MI
Civil design/engineering of the project: grading, vertical/horizontal curves/sections, the civil design of new/existing streets, design of utilities, water, sanitary sewers, storm sewers, quantity take-off’s(materials), specifications. Interacting with the surveyors, civil contractors, city inspectors/engineers, earth/concrete testing company.
Thank you,
Michael A. Cruciano
References:
Jessica Coffey
Project Manager
RES America
Niel Zambramo
Quality Control
RES America
Michael Johnson
Sr. Manager, Surveying
RES America
Contact this candidate