TRAVIS J. MONIOT

MECHANICAL ENGINEER

CONSTRUCTION MANAGEMENT

Study of and first-hand experience in Construction Management sometimes acting as CM, entrusted with decision making on behalf of supervisors. OSHA 30-hour training. Experience in most all aspects of the construction field. Dedication to creating a mutually beneficial working relationship with all colleagues and acquantinces. DAIRY DIGESTER PROJECTS

Site visit to Dairy Digester Farms in Okeechobee Florida to fill-in for project manager and provide daily oversight of work activities. Photos of work progress and reporting status of work. Discussions with contractors and meeting with client representatives. Review and input on the functional description for project control system and assist in the development of HMI screens for Automation. Join meetings and assist Engineering Design team as needed. GENSET FOR EMERGENCY BACKUP POWER

On-Site Project Engineering, Project Administration, and Construction Managemnet Services for the new 2.5 MW (n+1) deisel-fueled generator to provide emergency backup power (electricity) to nearby hospital facilities. The new generator being installed is classified as an “n+1” addition to the existing diesel generators at the Steam Plant. Daily duties include thorough daily progress reports summarizing all contractor work activities along with photo logs and detailed captions to provide a visual timeline of the work completed. This “life-critical” project requires careful, thorough review of project schedule and precise planning of Outages for tie-ins of new equipment for HVAC, Fuel Oil Piping, Urea Piping, Electrical, and Control Systems updates.

Other project responsibilities include:

- Coordination b/w Owner, General Contractor, subcontractors, and separate parties contracted directly with Owner

- Monthly Progress Reports

- SharePoint documentation & record keeping

- Document Control, Submittals, Transmittals, Change Orders, RFIs

- Review of Change Orders

- Review of GC Payment Applications

- Review of Schedule and feedback to GC

- Lead weekly construction meetings, stick to agenda, & type minutes

- Safety and Permitting Requirements

- Field measurements, reference sketches, etc.

B A C K G R O U N D

• Mechanical Engineer with over 5

years of Project/Process

Engineering in-office experience

&

Construction Management

working in the field

• Responsible for leading weekly

project meetings and creating

Progress Reports – Daily &

Monthly detailed status summary

• Project Coordination

• Project Administration

• Document Control

• Cost Analysis

• Review & understanding of

project documents, drawings, cut

sheets, specifications, procedures,

etc.

• RFIs – Initiating & Processing

• Schedule Review, Feedback,

Planning & Sequencing of work

• Field Measurements & Sketches

• Pipe Stress Analysis

• Quality Assurance

• Punch List

• Ensure Owner Satisfaction

STEAM & CHILLER WATER SYSTEM

INTERCONNECTION (Pittsburgh, PA)

On-site Project Engineering, Project Administration, and Construction Management services for the new steam underground steam piping interconnection from the existing Uptown steam system servicing Mercy Hospital and the new Duquesne University campus steam system located in Gibbons Energy Center, attached to Locust Parking Garage. The steam system was designed by Venture and installed by SSMI with Venture being the Owner’s Representative for Clearway Energy and providing construction management services and oversight of the piping installation throughout the entire construction phase up through successful system start-up and commissioning.

Responsibilities included:

• Daily Reports of work progress with detailed descriptions of work accomplished by mainly the General (mechanical) Contractor, the excavation/rigging subcontractor, as well as all other subcontractors on site, with site photos.

• Document control and organizing all project documentation.

• Review of all technical documentation submitted by the General Contractor.

• General project coordination between all contractors, engineering team, and owner.

• Led weekly project meetings and typed meeting minutes to send out to project team for status updates and addressing concerns.

• Creating issuing and submitting RFI’s and coordinating design changes based on existing, unmarked, underground utilities.

• Keeping logs current such as RFI Log, Change Order Log, and tracking additional work orders via T&M Labor forms.

• Writing Monthly Work Progress Reports for the 6-months of construction, and startup phase, summarizing work progress with detailed status of work completed or in-progess at every area on site, including a timeline of extensive progress photos of the work completed, and also outlining and explaining project changes while highlighing any issues/concerns.

• Coordinating all owner requests/demands and ensuring they are fulfilled, while keeping safety a number one priority.

• Measuring the expansion joints before and after startup to calculate thermal growth after system heat up phase.

• Developing a Cost Estimate for the installation of a typical underground Steam/Chill Water System to determine the Cost per Linear Foot of piping for future project planning purposes. JCI GAS SAMPLING (Somerset, PA)

Assisted with natural gas sampling for the Siloxane Adsorption System which is operational at the Laurel Highlands State Correctional Institution. Collecting gas samples on a monthly basis, typically on the E D U C A T I O N

University of Pittsburgh

B.S. Mechanical Engineering

Nuclear Engineering Certificate

C O N T A C T

adwtt3@r.postjobfree.com

724-***-**** (cell phone)

CHARACTER TRAITS

- PERSONABLE

- MOTIVATED

- METICULOUS

- MINDFUL

- CAREFUL

- MANNERED

- FOCUSED

- INTELLIGENT

- RATIONAL, LOGICAL THINKER

- QUICK STUDY

- FLEXIBLE

- HONEST

- REASONABLE

- DETERMINED

- COLLABORATIVE

- LOYAL

- TRUSTWORTHY, DEPENDABLE

- ORGANIZED

- FAIR-MINDED, IMPARTIAL

- NON-DISCRIMINATING

- INDEPENDENT

- SELF-RELIANCE

- EAGERNESS TO LEARN

- PATIENCE

- CONSCIENTIOUSNESS

- COMPASSION

- AMBITION

- PATIENCE

influent and effluent gas, and mailing to testing facility. Checking operational design parmeters and creating Site Service Reports for each site visit to document, equipment status and system setpoints. Record site photos as necessary for photographic record to document observations and provide comments for support. Ordering replacement parts when requested by client.

FAIRMONT BRINE PROCESSING (Marion County, WV)

Project Engineering services for this multi-disciplined service provider to the oil & natural gas industry. On-site engineering, operations, and troubleshooting. Responsible for scheduling and maintenance for all major equipment and implementing maintenance schedule. Coordination between field personnel & process design team for project upgrades and other design changes. Worked under supervision from on-site Senior Mechanical Engineer and Plant Manager and was assigned various tasks to assist with daily plant operations.

BIG RUN LANDFILL SILOXANE & VOC REMOVAL

SYSTEM (Asheville, KY)

Provided procurement, document control, and other contract administration type project services during the the procurement phase of the project. Coordinating updates to the Major Equipment List. Reviewing Equipment submittals and ensuring that everything is in accordance with the design prior to purchase, then drafting and issuing Purchase Order executed by Project Manager.

VARIOUS PROJECTS (Pittsburgh, PA)

Supported process design and QAQC for various projects during internship while still learning the basics of an entry-level position. Reviewing PFD’s and P&ID’s and assisting with design reviews and markups for drawing revisions. Studying and proofreading technical documents for peer review. Pulling information from 3D Models for design changes and/or analysis. Performing pipe stress analysis. Reviewing pipe stress analysis calculations and assisting with final reports to be submitted to client. Assisted with revising in-house documentation such as training manuals and updating other standard company documents. Coordinating with the project team to keep equipment lists current with most recent submittals. Review and update of Cost Control spreadsheets and other project administrator level documents for quality assurance. Other miscellaneous project administration, high-level tasks.

Travis Moniot

Mechanical Engineer

Page 3 of 3

SKILLS SUMMARY

- TASK-ORIENTED

- THOROUGH, DETAILED

- PROBLEM-SOLVING

- WELL-ROUNDED

- CREATIVE

- INTUITIVE

- HEAVY LIFTING – BOTH

LITERAL & METAPHORICAL

- TECHNICAL WRITING

- VARIOUS SOFTWARE

PROFICIENCIES

- DRAWING & SKETCHING

- 2D & 3D MODELLING

(AUTOCAD, SOLIDWORKS)

RELEVANT EMPLOYMENT HISTORY – Timeline of Experience

- Venture Engineering & Construction Inc.

o Project Engineer / Field Engineer, Full-Time

Jan 2018 – Present (4 yrs. 11 mos.)

o Process Engineer, Internship

Jun 2013 – Aug 2016 (3 yrs. 3 mos.)

Highlighted Skill: Computer Aided Design (CAD)

o Warrendale, PA

- Fairmont Brine Processing

o Plant Engineer, Full-Time

Sep 2017 – Jan 2018 (5 months)

- Pittsburgh Penguins, UPMC Lemeiux Sports Complex o Ice Resurfacer/Ice Operations, Part-Time

May 2019 – Jun 2020 (1 yr. 2 mos.)

Thank you for your time in considering me for employment. References are available upon request.

Travis Moniot

Mechanical Engineer

724-***-****

adwtt3@r.postjobfree.com

Contact this candidate