Robert J. Taylor

**** ****** **

San Antonio Texas, 78214

830-***-****

adwou5@r.postjobfree.com

Salute Mission Critical

Nov 2002 – Feb 2023

Equipment Rack and Stack

• Cable, terminate and dress fiber or copper network cabling

• Assist with the diagnosis of hardware and software

• Power cycling of customer equipment

• Perform cabinet/cage audits

• Blade/Card, Memory, Hard Drive, and Transceiver installations or removal

• Testing and troubleshooting of copper and fiber optic circuits

• Perform migrations of equipment, power, or networking devices

• Shipping and receiving of packages

• Oversee and maintain the Access Control System for the facility

• Maintain the DVR and CCTV cameras for the facility

• Administer/Create Access badges for internal and external customers

• Responsible for monitoring/allowing building ingress and egress of internal and external customers

• Receive, install, and test customer and internal cross connects of copper and fiber optic interconnections

• Provide timely customer and internal updates using a computer based ticketing system

• Receive, log, and store internal packages

• Perform and document inventory verification/counts.

• Perform DC power installations per Facility Engineering design specifications

• Monitor and report on Mechanical HVAC systems

• Monitor and report on Critical Power Systems

United States Army

Feb 2000 – Jan 2004 Mounted Armor crew member M1A1 MBT Gunner/Assistant Tank Commander

Sept 2009 – Apr 2011 United States Army Infantry Leader

Mounted Armor crew member M1A1 MBTGunner/Assistant Tank Commander

Deployed and served in Iraq in 2003 with the 4th Infantry Division.

Served as squad leader and platoon Designated Marksman for over two years.

Served all four years proudly and ended my time with an Honorable discharge, along with many decorations for my time in service.

Deployed for a second time in 2009 to Iraq and Kuwait to serve in part of border integrity and Detainee apprehension and housing missions served as a Quad commander in charge of 4 detainee housing units along with 20 infantry soldiers at the maximum security unit in Baghdad Iraq.

Associate Controller/Scheduler La Porte Texas Kinder Morgan / Bostco August 2016-June 2021

Transport complex product movements, ranging from 10k to 500K BBL, fuel oil and distillate to,from pipelines, vessels, barges, and tanks utilizing SCADA HMI.

Coordinated with maintenance, field operations, and third parties to conduct transportation plan and troubleshoot abnormal pipeline conditions.

Determined accurate timing of pipeline events (pumping, deliveries, strips, roof -off floats, injections, ship/

barge bunkers etc) by reviewing batch listings, schedules, and customer nominations. Knowledge of API, Viscosity, Flash Point, Sulfur Content, Color, and H2S in Vapor Phase to identify product range.

Load and unload storage tanks, ships and barges. Record product temperature and levels in storage tanks.

Performed work as assigned and directed by Field Controller and Control Room Supervisors.

Performed all work in strict accordance with Environmental, Health and Safety Policies and procedures.

Performed all work in strict accordance with operating policies, Procedures and checklists. Climb tank stairs, operate valves and pumps, gauge and temp record storage tanks. Maintain training in Safety and Hazmat requirements at the facility in accordance with the Texas safety council.

Perform or assist in the performance of preventive and regular maintenance duties. Assist Operations with product transfer alignments including piping, pumps and associated valves.

Directional Drilling Specialist Schlumberger Houston, Texas

Aug 2014 – Jun 2016

Directional Driller night hand, responsible for drilling vertically or horizontally as is necessary to reach pockets of oil from the top side land rig. Used calculations to deviate wells, or to restore wells from a horizontal to vertical direction.

Perform work closely with the Mud Engineers and Geologist in calculating the amount of bend needed in the mud motor, which in turn determines how long and in what direction the drill should be aimed. Assists Field Managers and Well Planners in developing plans and producing end of well reports.

Hewlett Packard/Contractor San Antonio, Texas

Server Deployment

Deploying and decommissioning HP Servers and Cisco network devices at the Microsoft Data Center. (Rack and stack)

Installed Cat6 and Fiber cables to servers and network devices, from infrastructure and end devices

Prioritized with Data Center Vendors on what resources would be needed on projects associated with Deployment of Property Hardware

Maintain system logs, including, but not limited to system, security, performance.

Document problems, error codes or messages and resolution in a format that would allow query capabilities.

Install and configure new hardware and software.

Racking servers, cable management and dressing of cables.

Document hardware, software, and firmware configuration.

Perform system checkouts.

Troubleshooting any reported problems. (break-fix)

Upgrade hardware and software

Apply updates, patches, and configuration changes.

Provide technical and configuration recommendations verbally and in writing.

Perform technical research as required in performance of system duties.

Open trouble tickets with the centralized Help Desk as problems are identified within three hours during normal duty hours.

MWD/RSS Operator Double Barrel Downhole Technologies Houston, Texas

Nov 2011- May 2014

Measurement while drilling/ Rotary Steerable System that is used to in drilling oil and gas wells. MWD/RSS Operator programs and operates and monitors downhole tools to interpret the measurements being taken and

Assist the Directional Driller to place the hole within the desired target coordinate. Able to ensure that all equipment in drilling are readily available at the site where the drilling will occur.

Execute proper communication with the directional driller and foreman to ensure that the requirements of the MWD/RSS are set and are ready to use. Setting the required hardware that will be used in the MWD/RSS at the site. Checking every tool to make sure that it is working properly and to ensure that the tools to be used are safe.

Displaying knowledge on how to manipulate the MWD/RSS system. Assist in interpreting the data of MWD/RSS. Completion and submission of important paper work such as safety reports and progress of the drilling operations. Up to date on the new procedure and process that are associated with MWD/RSS. Good written and verbal communication skills. Knowledge in petroleum, with specific experience with MWD/RSS.

Roughneck Boart Longyear San Antonio, Texas

May 2008 - Feb. 2009

Worked directional drilling and infrastructure on a Prosonic drilling rig.

Drillers assistant and crew hand prepping drilling rods Threading and tripping rod, prepping downhole ops and well completions. Trained as a MWD/LWD operator II and

Lead hand in training newly hired hands and crew. Ensured rig drilling derrick was operational and maintained as far as mechanical standards and conducted all before work safety meetings and operations.

Returned to active duty for the U.S., Army to deploy overseas. Maintained class B CDL for tanker and water trucks

HEAVY WHEEL MECHANIC Mantech Defense Systems

2007-2008

While in Iraq routed clearance series of vehicles to include the RG-31 MK3, RG-31 MK5, IVMMD (HUSKY) and the BUFFALO made by Force Protection Industries.

Performed 10-20 -30 level maintenance to include trouble shooting of the electrical system and upgrades, air conditioning and heating repair.

Duties consisted of pulling and replacing of Mercedes Bens diesel engines and Cummings diesel engines.

Troubleshooting and repair of mine detection panels and control panels. As well as Allison 2000, and 2500 series transmissions gen4.Replacement of drive train components, a/c upgrades to the electrical system and relay panels

.

Add-On-Armor/Red Dot Installation Specialist Baghdad, Iraq

2004

Performed installation of armor and air-conditioning on all series of light wheeled vehicle to include the M998, M1025, M1026 and M1114. Proficient at modifying and assembling AOA kits to fit the customers needs. Experience in maintenance operations, supervision, inspection and related areas.

QA/QC/AoA Installation Specialist- Iraq

2004-2006

Perform initial vehicle inspections upon arrival, Initial road test,

Preventive maintenance checks & services, Annual service of all vehicles, Suspension & Chassis Upgrades, Cab Armor & AC installation,

Troop Carrier Build / Install team, Check complete vehicle for errors before final road test, final inspection on USMC MTRV 7ton Trucks. On team with the most equipment on contract moved to costumers standards/time frame.

Performed installation of armor and air-conditioning on all series of light wheeled vehicle to include the M998, M1025, M1026 and M1114. Proficient at modifying and assembling AOA kits to fit the customers needs. Experience in maintenance operations, supervision, inspection and related areas.

Military Education

Certificate: Mounted armor crew member M1A1 MBT U.S. Army Ft. Knox, KY

Mounted armor crew member M1A2 MBT U.S. Army Ft. Knox, KY

May 2004 - Jan 2005: Combat Lifesaver U.S. Army

May 2004 - Jan 2005: Add-on Armor DOD

May 2004 - Jan 2005: U.S. Army Certificate, H.V.A.C. installation Red Dot Corp.

Sept 2009 – Nov 2009 U.S. Army Infantry Course FT. Bliss TX

Civilian Education

Aug. 1995 - May 2000: Southwest High School San Antonio, Texas High School diploma

Aug 2003 – May 2004: St. Phillips College San Antonio, Texas Associates in Applied Science and Welding Technology.

References available on request

Contact this candidate