Career Profile: Dr. Sanjay Yadav
After completion of my M.Sc. (Electronics) in 1985 and receiving fellowship from Ministry of Home Affairs, Govt. of India in 1986, I joined CSIR-NPL, New Delhi as Research Scholar. Two years later, I was also awarded SRF of CSIR, New Delhi. Completed Ph.D. degree on “Research Contributions towards the Development of Ultrasonic Instrumentation for Scientific, Biomedical and Forensic Applications” in 1990. I joined Science and Technology Department, Haryana Govt. in May 1989 as ‘Project Officer’ for the implementation of rural energy programme. I joined CSIR-NPL as Scientist B during November 1995. Recently, I am superannuated as Chief Scientist and Head, Physico-mechanical Metrology Division of CSIR-NPL, New Delhi on Aug. 31, 2022. Currently I am working as Chairman, International Quality and Accreditation Services (IQAS), New Delhi and Vice President of Metrology Society of India, New Delhi.
After joining CSIR-NPL, I had dedicatedly worked towards development of metrological standards and their dissemination for national growth. I have significantly contributed in the development of 3 primary pressure standards, NPL-HI (20-1000 MPa) in 2000; NPL-H2 [(10-100) MPa, (20-200) MPa] in 2008 and 2011, respectively, NPL-H3 [(5- 50) MPa and (50-500)] in 2015; 8 secondary pressure standards (1-500) MPa during 2002-2015 and a differential pressure standard having capabilities of both line and differential pressure upto 50 MPa in 2015. Also successfully participated in several key comparison exercises i.e. CCM.P-K8 (50 to 500 MPa) 1997, APLAC Interlaboratory comparison (0-50 MPa), 1998, APMP M.P-K7 (10 – 100 MPa), 2002, CCM P-K7 (10-100 MPa), 2004, CCM P-K13
(50 to 500 MPa) providing services to stakeholders. 2012; APMP P-K13 (50 to 500 MPa) 2015 for metrological equivalence and registered 6 CMCs covering entire hydraulic pressure range in KCDB of BIPM for global compatibility and visibility. Co-ordinated 7 PTs, sponsored by NABL for more than 100 Indian laboratories during 2002 to 2015. All the established standards are now dedicatedly providing services to stakeholders. Academic Accomplishments: I have significantly contributed in the academic activities. The outcome of such accomplishments is resulted into around 451 publications (159 research papers in journals, 190 in conferences, 83 invited talks, 19 books and book chapters); 12 patents and copyrights, technologies and knowhow’s; 12 graduate and post graduate projects and 6 PhD thesis. Another 7 PhD students are rigorously working. Some of the technologies developed have already been commercialized. I have also worked as Professor in Faculty of Physical Sciences, ACSIR, teaching PhD students a course on Advanced Measurement Systems and Metrology. I had also worked as Faculty for one year Diploma Course of Academy of Scientific and Innovative Research (AcSIR), Ghaziabad on Precision Metrology and Quality Controls (PMQC). I have extensively visited several countries; LNE, France during 1998 (1 week) and 2014 (1 week); NMIJ, AIST, Japan during 1998-99 (10 months); NMCL, SASO, Saudi Arabia, 2003 (2 months); KIM-LIPI, Indonesia during 2014
(1 week); NSM, Bhutan 2015 (1 week) and SIRIM; Malaysia 2017 (1 week) on official deputations. Administration: Administratively, I am a system grown and oriented scientist elevated to leader. After joining Scientist B in 1995 at CSIR-NPL, elevated as Head of Pressure Standards in 2012, Head, Pressure and Vacuum Standards in 2014, Head, Pressure, Vacuum and Ultrasonic Metrology 2015, Deputy Head, Physico-Mechanical Metrology Division in 2016 and finally elevated to Head, Physico-Mechanical Metrology Division in 2019, the largest division of CSIR-NPL. This clearly shows the faith and trust of the CSIR-NPL Management in my administrative and leadership capabilities.
Recognition / Awards / Honours: Received many awards / recognitions in India and abroad. For the recognition and awards, I am the recipient of Col. G.N. Bajpayee Award of Institution of Engineers, India
(1989);Commendation Certificates from Haryana Government (1991 & 1992); JICA Fellowship of JAPAN
(1998), Commendation Certificates from SASO, Saudi Arabia (2003); 3 Appreciation Certificates from Director, NPL (2005); Software Development Certificates from Director, NPL (2008); nominated as Member of APMP Technical Committee of Mass Related Quantities(TCM), Australia (2013-2019); Nominated as Country Representative in APMP (2019); Members, Standards Advisory Committee, BIS (2019); nominated as member representative in National Advisory Committee of NCERT (2020); elected as Vice President, Metrology Society of India (2020); working as Editor-in-Chief (EIC) of MAPAN – Journal of Metrology Society of India since 2016; Recipient of prestigious APMP Award of Developing Economies 2020, China and Japan; Member of IMEKO Governing Board 2020; Member IMEKO TC6 and TC21, Hungary; Member WGPAV and WGM BIPM 2021, France; nominated as Member Governing Council, FCRI, Palakked, Kerala; Chairman, Safe Guard and Appeal Committees, Legal Metrology Department 2022, elected Vice President of Ultrasonic Society of India (USI 2022 and appointed Chairman, Technical Advisory Committee of Calibration, Federation of Development of Accrediatation Services (FDAS) 2022. Visionary: I do have vision and out of box thinking to make NPL a scientific organization of international repute by carrying forward R&D activities in the emerging multi-disciplinary fields of science and technology that can meet its scientific, social and national objectives in a more meaningful manner. Keeping pace with the developments taking place internationally, I can visualize future trends for research in the laboratory and can help in capability building. Leadership quality: I am a proven, system oriented and grown team player. I believe in team edifice, mentoring, entrusting, nursing, problem resolving and providing a fair and free scientific environment to make sure that all the team members do feel pride in working and fulfilling their commitment well ahead of time. I always work to establish a very strong and active team of motivated, energetic and dynamic members and guide, mentor and motivate them to work with utmost potential and abilities Image builder: I have taken strides to put the image of NPL and CSIR through my own efforts in the past and have done every bit for a brighter image building interacting with academia, industrialists, and institutions.
Skills for Organisation of Events: Always working in a team, learning from seniors, I have developed excellent organizational skills for scientific events. As a leading organizer, I have been part of the organisation several noted events like 33rd APMP General Assembly and Related Meetings in Delhi in 2017 as Co-Convener and Chairman, Finance Committee (800 participants from 30 countries); Industry Academia Meet in India International Science Festival (IISF-2016) as its Coordinator (more than 3000 participants in 5 days); AdMet Series of national and International Conferences on Various capacities from Co-Convener to Vice-Chair, MAPIKI -2014 as Convener, Celebrations of annual World Metrology Day to name few events. As a part of dissemination of metrology in the country, APMP region and SAARC nations, I have been parts of the organisation of more than 27 training programmes imparting training to more than 550 trainees. Funds Raising Capabilities: In any scientific organisation, the funds raising capability is one of the essential requirements. Over the years, I have utilized my abilities to write appropriate metrological projects and to convince the funding and sponsoring agencies. My sincere efforts have resulted into more than 40 sponsored projects awarded to NPL wherein I have contributed on different capacities like team member, principal investigator, Coordinator, Dy. Project Leader and Project Leader.
Futuristic Works: My current research interests include development of quality accreditation services in India, R&D in physico mechanical measurements specially pressure and vacuum metrology; development and dissemination of national pressure & vacuum standards to users through calibration, testing, training, technical and consultancy services; key comparisons, PT programmes, Finite Element Analysis (FEA), Monte Carlo Simulations for pressure balances, development of standards and techniques for testing and pattern approval of blood pressure measuring instruments and development of testing facilities for personal protective equipment (PPE) and medical devices. I proposed that individual scientist should pursue his / her own research R&D within the mandate of NPL. His / her research works should finally converge for the “Advancement of Metrology’. The road map for achieving such goals is to motivate, encourage and appreciate the Scientists and other work-force for carrying out good works within the laboratory framework, leaving behind his / her own interests, but to expand his / her vision to embrace the activities leading to the advancement of metrology. For this purpose, I proposed to provide them fair and free scientific environment, create systems and culture to empower the them to excel and have pride of working in world class laboratory. Have domestic and international collaborations for sponsored developmental activities and for imparting training to academic and scientific community. I encourage my colleagues to develop on-line monitoring system to make sure the projects do not suffer due to system related, any artificial impediments and subjectivity. A synergy between the senior and young scientists is strongly advocated as experiences of seniors and young ignited minds would certainly culminate into excellence in metrology. I have contributed immensely in registering 17 Calibration and Measurement Capabilities (CMCs) registered in Key Comparison Database (KCDB) of BIPM, France which are at par with leading NMIs of the world. Also, planned significant improvement in CMCs, both in numbers and improved uncertainties. Ultrasonic Interferometer Manometer (UIM), an existing primary standard, wherein mercury is used as transmitting medium. Most of the NMIs have replaced / being replaced or banned mercury-based instruments. I propose to establish Fabry Perot cavity based optical interferometer manometer (OIM) as primary standard based on quantum pascal in the pressure range 0.1 Pa to 130 KPa within the uncertainty comparable or better than then UIM. A project of Rs. 4.0 crore is already sanctioned by CSIR under FBR scheme. Another project, I will be working is ‘Setting up of Testing Facilities at NPL for Personal Protective Equipment (PPE), Ventilator and IR Thermal Body Scanners’ to support the biomedical laboratories, hospitals and MSME industries by providing traceable calibration and testing services. A project amounting to Rs. 5.40 crore is already approved by CSIR under FCP scheme. Another mega project of Rs. 12.57 crore is being implemented for creation of new metrological facilities and strengthening existing standards in physic mechanical parameters. Also worked extensively as team member to prepare an institutional project of Rs.100 crore for realizing primary standards based on redefined SI units and modernizing standards for futuristic requirements. Further, new vistas are being explored for areas such as dynamic pressure measurements like blood pressure measurements, design and development of indigenous pressure transducers and devices with lowest possible uncertainties, establishment of extended facilities etc. Bio-data
1. Name : Dr. Sanjay Yadav
2. Date of Birth: 05-08-1962
3. Nationality Indian
4. Current position and Address: Chairman,
International Quality and Accreditation Services (IQAS) New Delhi, India
Vice President,
Metrology Society of India (MSI), New Delhi, India Vice President,
Ultrasonic Society of India (USI), New Delhi, India Editor-in-Chief,
MAPAN Journal of Metrology Society of India, New Delhi, India Chief Scientist and Head (Former),
CSIR-National Physical Laboratory,
Dr. K.S. Krishnan Marg, Ne w Delhi – 110060, India Professor (Former)
Faculty of Physical Sciences
Academy of Scientific and Innovative Research (AcSIR) Ghaziabad, UP, India
Mob: 986-***-****, Email: adwnge@r.postjobfree.com, adwnge@r.postjobfree.com; 5. Educational Qualifications:
Degree Subject University/Institute Year
B. Sc. Phys., Chem., Math. Meerut University 1983
M. Sc. Physics (Electronics) Meerut University 1985 Ph. D. Physics Meerut University
(Worked at NPL, India)
1990
6. Details of previous employment/ academic and research experience Sl.
No.
Position Held /
Research field
Name of the Organization From To
1 Chairman (Honorary), IQAS International Quality and Accreditation Services (IQAS),
New Delhi, India
26-09-2022 continued
2 Member, Governing Council FCRI, Pallakad, Kerla 22-04-2021 Continued 3 Head, Physico-Mechanical
Metrology
NPL, India 01-07-2019 31-08-2022
4. Chief Scientist NPL, India 14-11-2017 31-08-2022 5. Dy. Head, Physico-Mechanical
Metrology
NPL, India 01-04-2017 30-06-2019
6. Professor Faculty of Physical Sciences,
NPL, AcSIR, India
14-11-2017 31-08-2022
7. Senior Principal Scientist NPL, India 14-11-2012 13-11-2017 8. Head, Pressure, Vacuum and
Ultrasonic Metrology
NPL, India 01-05-2016 31-08-2022
9. Head, Pressure Metrology NPL, India 01-05-2014 30-04-2015 10. Associate Professor Faculty of Physical Sciences, AcSIR, NPL, India
14-11-2012 13-11-2017
11. Principal Scientist NPL, India 14-11-2008 13-11-2012 12. Scientist E1 NPL, India 14-11-2004 13-11-2008
13. Expert in Pressure Metrology NMCL, SASO, Saudi Arabia 03-03-2003 03-05-2003 14. Scientist C NPL, India 14-11-2000 13-11-2004
15. Metrology Trainee JICA and NMIJ, AIST 01-10-1998 01-08-1999 16. Scientist B NPL, India 14-11-1995 13-11-2000
17. Project Office Science and Technology
Department, Haryana
22-05-1989 13-11-1995
18. Research Scholar and SRF Ministry of Home Affairs, Delhi and CSIR at NPL, India
01-12-1986 21-05-1989
7. Important Foreign Deputations / Assignments
S.
No
Name of the Lab / Inst
visited
Duration Funding
Agency
Brief Job description
1.
D&H, France and LNE,
France
June 22-26,
1998
D&H,
France
Training in Pressure Metrology
2.
NRLM,
Japan
Oct. 1998 to
Aug. 1, 1999
JICA,
Japan
Training on Research on Measurement
Science Technology and Standards
3.
NMCL, Saudi Arabia March 6 to
May 3, 2003
SASO,
Saudi
Arabia
Expert in Pressure Metrology for the
Development of Pressure Measurement
Capabilities of NMCL, SASO, Saudi
Arabia
4. KIM-LIPI, Indonesia 4 days, 2014 PTB,
Germany
To attend operational planning workshop
5. D&H, France and LNE
France
5 days, 2014 WIKA,
Germany
Training on CCPG (model CPB 8000)
along with the twin post differential
pressure balance system
6. BSB, Bhutan 2 days, 2016 PTB
Germany
For attending “SAARC-PTB
5thcoordination meeting on Regional
Cooperation in Metrology”
7. NMIM, Malaysia 5 days, 2017 PTB
Germany
To attend APMP/APMLF Joint Workshop,
DEC Meeting and MEDEA Validation
Workshop
8. Summary of the Publications and Academic Achievements : Journals Conference
proceedings
/ presented
Invited
Talks /
Lectures
delivered
Books /
Book
Chapters
Total Patents /
Copyrights
PhDs Guided
/ Guiding
Part of the R&D,
Consultancy /
Technical Service
Projects
Completed
159-***-**-** 451 12 13
7 awarded
42
9. Contributions in Books as Author, Contributor and Editor: Editors / Author /
Contributor
Book
/Title of
the
chapter
Year of
Pubn
Title of Book
Country Edition
No.
Publisher
Sanjay Yadav
Naveen Garg
Harish Kumar
Shankar Aggarwal
Book 2023 Recent Advances in
Metrology: Select
Proceedings of AdMet
Sngapore Springer
In process,
coming
soon
S. K. Jaiswal
Venu Gopal Achanta
(Editors)
2022 - Lecture Notes in
Mechanical Engineering
Sanjay Yadav
Harish Kumar
Meher Wan
K, M. Pandey
Yusri Yusof (Editors)
Book 2023 Recent Advances in
Applied Mechanics and
Engineering: Select
Proceedings of ICAMME
2022 - Lecture Notes in
Electrical Engineering
Sngapore Springer
In process,
coming
soon
Sanjay Yadav
Harish Kumar
Pavan Kumar Kankar
Wanyang Dai
Fenghua Huang
(Editors)
Book 2023 Proceedings of the Second
International Conference
on Artificial Intellegence,
Robotics, and
Communication –
ICAIRC 2022 - ICAMME
2022 - Lecture Notes in
Electrical Engineering
Sngapore Springer
In process,
coming
soon
D. K. Aswal,
Sanjay Yadav
Toshiyuki Takatsuji,
Prem Rachakonda,
Harish Kuumar
Book 2022 Handbook of Metrology
and Applications
Springer Reference
Engineering, Reference
Module Computer
Science and Engineering
https://link.springer.co
m/re
ferencework/10.1007/9
78- ***-**-****-5
Coming soon
Singapore Springer
Sanjay Yadav
K P Chaudhary
A K Gahlot
Yogender Kumar
Aman Dahiya
Naveen Garg
(Editors)
Book 2021 Conference Proceedings
Recent Advances in
Metrology: Lecture
Notes in Electrical
Engineering
https://link.springer.co
m/b
ook/978**********
Sngapore Springer
Sanjay Yadav
Abid Haleem
Pawan K. Arora
Harish Kumar
(Editors)
Book 2021-
22
Proceedings of
International
Conference
Mechanical and Energy
Technology
https://link.springer.co
m/b ook/10.1007/978-
981-19- 0108-9
Singapore
Springer
Sanjay Yadav
Prashant Kumar Jain
Pawan Kumar Kankar
Yogesh Srivastava
(Editors)
Book 2021-
22
Proceedings of
International
Conference
Mechanical and Energy
Technology
https://link.springer.co
m/b ook/10.1007/978-
981-19- 1618-2
Singapore
Springer
K Govindan,
Harish Kumar,
Sanjay Yadav
Book
2021 Advances in Mechanical
and Materials
Technology: Lecture
Notes in Mechanical
Engineering
(Sub title:Select
Proceedings of EMSME
2020)
Ebook: ISSN2195-4356
Pages 1467
https://link.springer.com
/book/978**********
Singapore Springer
Naveen Garg, Chitra
Goutam,
Sanjay Yadav
Compen
dium
2021 A Compendium on
National Policy and
Action Plan for
Environmental Noise
Management & Control
in Metropolitan Cities of
India
CSIR-
NPL and
MSI,
New
Delhi
Naveen Garg, Chitra
Goutam,
Sanjay Yadav
Compen
dium
2022 A Compendium on
Noise Pollution
Measurement and
Control
CSIR-
NPL and
MSI,
New
Delhi
Sanjay Yadav, G.
Mandal, D.D.
Shivagan, P. Sharma,
A. Zafer and D. K.
Aswal
(Authors)
Internati
onal
Harmoni
zation of
Measure
ments
Part I:
Internati
onal
Measure
ment
System
2020 Metrology for Inclusive
Growth of India, edited
by D.K. Aswal
• Ebook - ISBN:978-
***-**-****-3
Hardcove - ISBN: 978-
***-**-****-7
https://link.springer.co
m/chapter/10.1007/978
-***-**-****-3_2
pp 37-82
Singapore Springer
Sanjay Yadav, G.
Mandal, D. D.
Shivagan, P. Sharma,
A. Zafer and D. K.
Aswal (Authors)
Internati
onal
Measure
ment
System:
Journey
with
Time
2020 Metrology for Inclusive
Growth of India, edited
by D.K. Aswal
• Ebook - ISBN:978-
***-**-****-3
Hardcove - ISBN: 978-
***-**-****-7
https://link.springer.co
m/chapter/10.1007/978
-***-**-****-3_3
pp 83-143
Singapore Springer
Sanjay Yadav, N. D.
Sharma, S. S. K. Titus,
S. K. Jaiswal, V. K.
Jaiswal, N. Garg,
K.Bapna, and D. K.
Aswal (Authors)
Physico-
Mechani
cal
Metrolo
gy
Part I:
Impetus
for
Inclusiv
e
Industri
2020 Metrology for Inclusive
Growth of India, edited
by D.K. Aswal
• Ebook - ISBN:978-
***-**-****-3
Hardcove - ISBN: 978-
***-**-****-7
https://link.springer.co
m/chapter/10.1007/978
-***-**-****-3_6
pp 237-252
Singapore Springer
al
Growth
Sanjay Yadav, G.
Mandal, N. Singh,
S.Pati, R.Sharma,
G.Moona, M.Jewaria,
D. D. Shivagan,
K.Bapna, S. K.
Jaiswal and V. K.
Jaiswal and D. K.
Aswal (Authors)
Physico-
Mechani
cal
Metrolog
y
Part II:
Mass and
Length
Metrolog
y
2020 Metrology for Inclusive
Growth of India, edited
by D.K. Aswal
• Ebook - ISBN:978-
***-**-****-3
Hardcove - ISBN: 978-
***-**-****-7
https://link.springer.co
m/chapter/10.1007/978
-***-**-****-3_7
pp 252-306
Singapore Springer
Sanjay Yadav, D. D.
Shivagan, K.Bapna,
V.K. Jaiswal, P.
Sharma, S.Saha, M.
Singh, N. Garg,
K.Soni, S. S. K. Titus
and D. K.Aswal
(Authors)
Physico-
Mechani
cal
Metrolog
y
Part III:
Thermal,
Optical
and
Acoustic
Metrolog
y
2020 Metrology for Inclusive
Growth of India, edited
by D.K. Aswal
• Ebook - ISBN:978-
***-**-****-3
Hardcove - ISBN: 978-
***-**-****-7
https://link.springer.co
m/chapter/10.1007/978
-***-**-****-3_8
pp 307-376
Singapore Springer
Sanjay Yadav, S. S.
K. Titus, R. Kumar, I.
Elizabeth, N. D.
Sharma, A. Kumar,
P.K. Dubey, A. Zafer,
S. K. Jaiswal, N. Garg,
K.Bapna and D. K.
Aswal (Authors)
Physico-
Mechani
cal
Metrolog
y
Part IV:
Force,
Pressure
and Flow
Metrolog
y
2020 Metrology for Inclusive
Growth of India, edited
by D.K. Aswal
• Ebook - ISBN:978-
***-**-****-3
Hardcove - ISBN: 978-
***-**-****-7
https://link.springer.co
m/chapter/10.1007/978
-***-**-****-3_9
pp 377-456
Singapore Springer
Sanjay Yadav, D.
B. Singh, P. K. Arora
and Harish Kumar
(Editors)
Book June
2020
Proceedings of
International
Conference in
Mechanical and
Energy Technology
ISSN 2190-3018 ISSN
2190-3026 (electronic)
https://doi.org/10.1007/
978-***-**-****-3
Singapore Springer
DK Aswal,
R. Mehrotra,
Sanjay Yadav,
SSK Titus,
S. K. Jaiswal,
N. Garg,
D. D. Sivagan,
S. G. Aggarwal,
V. K. Jaiswal,
D. K. Mishra,
A. Zafer and
I. Elizabeth (Editors)
Book May,
2019
Redefined SI units and
glimpses of NPL
metrological activities
ISBN:***-**-****-813-
4
India MSI, New Delhi
Sanjay Yadav,
Afaqul Zafer,
Indu Elizabeth and
D.K. Aswal
(Contributors)
Policy
Docume
nt
May,
2019
NPL Policy on
Metrological
Traceability
http://www.nplindia.in/s
ites/default/files/NPL-
Policy-On-Metrological-
Traceability.pdf
India NPL, New Delhi
and MSI, New
Delhi
Sanjay Yadav,
Afaqul Zafer,
Indu Elizabeth and
D.K. Aswal
(Contributors)
Recomm
endations
May,
2019
Recommendations for
Revision of SI Units and
Other Necessary
Changes to be
Incorporated in Syllabi
of NCERT Text Books
https://www.nplindia.in/
sites/default/files/NPL-
Recommendations-for-
Changes-in-Metrology-
Related-Courses-in-
Engineering-
Courses.pdf
India NPL, New Delhi
and MSI, New
Delhi
Sanjay Yadav,
Afaqul Zafer,
Indu Elizabeth and
D.K. Aswal
(Contributors)
Recomm
endations
May,
2019
Recommendations for
Revision of Syllabus for
Metrology in
Engineering Courses
https://www.nplindia.in/
sites/default/files/NPL-
Recommendations-for-
Changes-in-Metrology-
Related-Courses-in-
Engineering-
Courses.pdf
India NPL, New Delhi
and MSI, New
Delhi
Sanjay Yadav
(author)
Industry
Academi
a
Interactio
n, pp 38-
39
Feb.
2017
Glimpses. IISF-2016 India - IISF, New Delhi
Sanjay Yadav,
R. Yaduvanshi
(Editors)
Dec.,
2017
Proceedings of
Springer International
Conference on Pattern
Recognition (ICPR-
2017)
India Springer
Sanjay Yadav
(author)
Industry
Academi
a
Interactio
n, pp 84-
87
Dec.
2016
Programme Guide,
IISF-2016
India - IISF, New Delhi
ड व .एन. ओझ,
ड के.प . च धर,
ड संजय य दव,
ड हरर कृष्ण स ंह,
ड श ंकर ज अग्रव ल, ड ुध र
कुम र शम
Book May
2015
र ष्ट्र य संग ष्ठ
(म प क – 2014), श ध त्र
संकलन ुपत क
ISBN ***-**-****-530-
2
भ रत - ए आईआर-र ष्र य
भ सतक प्रय गश ल, नई
स ल्ल
10. No. of Patents / copyrights
S.
No.
Description of the Patents / Software copyrights Registration No. / Date 1 Calibration of industrial master/reentrant type dead weight testers, Sanjay Yadav, Devraj Arun Vijayakumar, A. C. Gupta
L-17058/97 /04.12.1997
2 Estimation of measurement uncertainty of pressure measuring instruments using simple piston gauges as standards, Devraj Arun Vijayakumar, Sanjay Yadav, R. K. Shrma, D. R. Sharma and A. C. Gupta
L-17733/98 / 17.09.1998
3 A complete software package for “Calibration of pressure measuring instruments, Sanjay Yadav, Devraj Arun
Vijayakumar, A. C. Gupta
L-19605 / 17.09.2001
4 A software for calibration of pressure measuring instruments using DWT as pressure standard, Sanjay Yadav, A. K. Bandyopadhyay, V. K. Gupta and Omprakash
016 CR 2008 / 27.10.2008
Copyright Protection #SW-
4502/2010
5 Low cost and high sensitivity polar-resistive humidity sensor, A. Kumar, Ravikant, S. Singh, H. Borkar, G. Gupta, S. Singh, P. K. Dubey, SanjayYadav, V. N. Ojha
Indian Application No:
201********* (2017)
6. Sealed High Pressure Transducer, Akashdeep, Shanay Rab, Amar Dhwaj, Harish Kumar and Sanjay Yadav
Indian design Application No:
327417-001 dated 21-02-2020
7. An Experimental Design Setup for Testing of Half-Face Mask for 3D Parameters in 1 setting, S.G. Aggarwal, B. Kumar, P. Patel, K. Singh, D. Soni, P. Johri, C. Sharma and Sanjay Yadav
Application No: 202*********
dated 05/10/2021, Ref:49NF2021
dated 21-10-2021
8. Blood Pressure Pattern Approval Test Bench, Sanjay Yadav, Rahul Kumar, Ashok Kumar, P.K. Dubey, Afaqual Zafer, Nita Dilawar Sharma, Om Prakash, Harish Kumar, V. K. Gupta, S. K. Jaiswal and Ashutosh Agarwal
Application No: 202*********
dated 21-10-2021, Ref.:112NF2021
dated 21-10-2021
9. Ultrasonic Pulse Velocity Tester Device with Threshold Error Correction, P K Dubey, Sanjay Yadav and Piyush
Indian patent No: 112NF2021
202*********/37381
Dated 21-10-2021
10. Electromagnetic acoustic transducer and method for residual stress detection in materials, P.K. Dubey, Sanjay Yadav, and Bishan Kumar
Processed for filing
11 Control and Automation Software for Calibration and Testing of Blood Pressure Measuring Devices, P. K.Dubey, Rahul Kumar, Ashok Kumar and Sanjay Yadav
Processed for copyright registration
12 Software for commercial ultrasonic flaw detector based five axes immersion C-Scan testing system, P. K. Dubey, Kalpana Yadav, Sanjay Yadav, and Rahul Kumar
Processed for copyright registration
13 A device and method for sensitivity enhancement of a pressure transducer, Mahammad Arif Sanjid, Shanay
Rab, Afaqul Zafer, Shiv Kumar Jaiswal and Sanjay
Yadav
Processed for filing patent
11. Technology / Process / Product development / Commercialised: Title Year of
Development
Developed / Commercialized
Device to Use Conventional Ultrasonic Flaw
Detector as EMAT based Flaw Detector
2021 Developed (Ready for transfer)
Ultrasonic Pulse Velocity Tester Device with
Threshold Error Correctionto M/c SRK
Instruments, Hyderabad
2021 Developed, patented technology
finalized and transferred on 26-08-
2022
Improved Ultrasonic Technique for Concrete
Testing
2021 Developed (Ready for transfer)
Blood Pressure Pattern Approval Test Bench 2020 Developed, successfully installed and commissioned at RRSLs, Faridabad
and Varanasi
Improved Variable Frequency Ultrasonic
Interferometer for Velocity and Attenuation
Measurement in liquids to M/s PICO, Chennai
2019 Commercialized, patented technology
transferred, 18-02-2019
3 Tesla Auto-Ranges Pulsed/Static Field Gauss
Meter to M/s PICO, Chennai
2019 Commercialized, Knowhow
transferred, 18-02-2019
Design and development of a cross float valve 2017 Developed (Ready for transfer knowhow)
Development of an indigenous wireless
environmental conditions measurement,
monitoring and recording system
2017 Developed (Ready for transfer
knowhow)
Calibration software to M/s MSME (RTC),
Delhi.
2008 Software licensed
Calibration software to M/s Sushma Industries
and Calibration Centre, Bangalore.
2008 Software licensed
Calibration software to M/s Birla Tyres,
Balasore, Orissa
06-03-2002 Software licensed
Calibration software to M/s Ravika Engineers,
Delhi.
26-12-2001 Software licensed
Calibration software to M/s TIET, Patiala. 26-12-2001 Software licensed 12. Honours, Recognition and Awards:
Award /Recognition Year Award Org. / Inst. Brief citation of the award work Scholarship 1986 MHA, New Delhi Research Scholarship for Ph. D. SRF 1988 CSIR, New Delhi SRF for Ph. D.
Col. G.N. Bajpai Prize 1989 Institution of Engineers, India Best paper published in Journal for the year 1989
Commendation
Certificate
1993 District Administration,
Rohtak
For the outstanding work done during
1992-93
Commendation
Certificate
1992 District Administartion,
Rohtak
For the outstanding work done during
1991-92
Appreciation
Certificate
2003 NMCL, SASO, Saudi Arabia Outstanding work for the development of pressure measurement capabilities
Appreciation
Certificate
2005 NPL, New Delhi Licensing of calibration software to M/s Ravika Engineers, New Delhi.
Appreciation
Certificate
2005 NPL, New Delhi Licensing of calibration software to M/s Birla Tires, Balasore.
Appreciation
Certificate
2005 NPL, New Delhi Licensing of calibration software to M/s TIET, Patiala.
Joint Secretary 2007 MSI, New Delhi Elected Joint Secretary of MSI Software Dev.
Certificate
2008 NPL, New Delhi Licensing of calibration software to M/s MSME (RTC), Delhi.
Software Dev.
Certificate
2008 NPL, New Delhi Licensing of calibration software to M/s Sushma Industries, Bangalore.
Member
Editorial Board
2010 IJMQE, France International J. of Metrology and Quality Engineering (IJMQE)
Joint Secretary 2010 MSI, New Delhi Reelected Joint Secretary of MSI Executive Council
(EC)
2013 USI, Delhi Elected to EC of USI, Delhi
Member, TCM 2014
to
2019
APMP Member, Technical Committee of Mass
Related Quantities (TCM), Asia Pacific
Metrology Program (APMP) since 2014
Member, Scientific
Committee
2014 Pretoria, South Africa Nominated as International Metrology Conference (CAFMET 2014) held during
March 31 to April 3, 201
Member, National
Advisory Committee,
2014 Thapar University, Patiala National Conference on Advances in Metrology (AdMet-2014) held during
Feb. 19-21, 2014. Organised a half day
“Workshop on Apex Level Standards and
Industrial Metrology” on April 30, 2014.
General Secretary 2015 MSI, New