Mircea Onet

**** ************ ******, ***:****

Las Vegas, NV, 89107

Phone:725-***-****

adwlig@r.postjobfree.com

adwlig@r.postjobfree.com

OBJECTIVE

I am looking for a position Mechanical Design Engineer/Mechanical Designer to apply my skills and knowledge in Mechanical and Manufacturing Engineering. PROFESSIONAL EXPERIENCE

Skybridge Aviation

Mechanical Design Engineer (Contract)

10/05/2022-12/08/2022

• Assigned to do Mechanical Engineering Design work on contract basis to Virgin Galactic, Tustin CA. I participate into an engineering team design Landing gear System and the attached Electromagnetics Brakes using CATIA V5.

Honeywell

Mechanical Design Engineer (Contract)

10/21/2021-10/01/2022

• Assigned to Honeywell Aerospace at Phoenix, AZ to do Mechanical Design work using CAD NX 10 and CATIA V5 for new and redesign mechanical parts model and assembly.

• New and redesigned parts used in building Turbofan Engine series TFE731 starting from Rotor Fan, Axial Compressor, Radial Compressor, Combustor, LPT and HPT Turbine, External Cases, Piping, Hosing and Tubing for Fuel distribution, Cooling system, Air and Water pressure distribution.

• PLM and Team Center experience working with NX 10 and CATIA V5. BCA-Boeing Commercial Airplanes

Mechanical Engineer (Contract)

02/15/2021-08/14/2021

• Assigned to do Mechanical Engineering work on contract basis to BCA-Boeing Commercial Airplanes, Everett, WA, with FAUB (Fuselage Automated Upright Build) design and fabrication of manufacturing systems and tooling design for 777X.

• Familiarity with KUKA Robots and KUKA end effector for machining operations, and ALEMA Software that provide programming and control system to KUKA Robots RS260 and RS 210 FOR Lower and Upper OML MRP.

• Designed Tooling for OML MRP using 2019 SolidWorks and 2019 AutoCAD 2D/3D, Pneumatic Schematics for Power Control and Automation used in MRP Systems.

• Contributing and documenting for continue process improvement of FAUB, production and manufacturing system, eliminating idle time, unplanned troubleshooting and shorting the production time to three days to one airplane event.

ADVANCED RESOURCES

Mechanical Designer (Contract)

04/01/2019-01/25/2021

• Design and drafting the Grippers and Automation Systems using Inventor 2015 and AutoCAD 2015 for FANUC type of Robots.

• Stress Analysis of the machine elements using hand calculation and Simulation FEA.

• Concepts and sizing components of pneumatic schematics used on linear drive.

• Layout of Automation system, Conveyors, robot, guards and pallets.

• PLM and Team Center experience.

BIOSOLID REDUCTION TECHNOLOGIES

Mechanical Engineer (Contract)

16/01/2017-02/30/2019

• Designed and draft for Mechanical Equipment used in Petro-Chemical Processing of Hydrocarbon Petroleum products.

• Layout of plant creating PI&D and PFD diagram.

• Shell and Tube, Double –Pipe Heat Exchanger design and Piping design.

• Belt Conveyor for bulk waste material redesign.

• SolidWorks 2012, AutoCAD 2012 and Autodesk Inventor11 I used for design and FEA: Structural and Thermal analysis

WAHLCO INC,

Mechanical Design Engineer

09/2015-05/2017

• Design Air Polution Control Equipment Amonia on Demand System,Piping Suports Structure using Autodesk Inventor CAD Software and Pipe and Tube Inventor Application. Western Methods.

Tool Designer (Contract)

09/22/2008-08/04/2015

• Tool design for assembly and 5 axis machining for complex parts using Tool Design Concepts and Manufacturing Principles .

• CATIAV5 R20 CADD Software used for Surface, Solid Modeling, Analysis and Drafting Layout. New Century Remanufacturing.

Mechanical Design Engineer (Contract)

04/22/ 2002 – 07/20 2008

• Design and Drafting Layout of CNC Machining Centers and CNC Turning Centers with Vertical and Horizontal Spindle with working table between 36’’-120’’ DIA being under control system produced by GE- FANUC AC Servo Electrical Motors with electrical power range 60-100HP.

• Concept, and design layout for CNC DUPLEX MIL with two heads and multipoint cutters powered with 40HP FANUC Servo Control System equipped with Planetary Gear Box and Belt Teeth Transmission for Main spindle.

• Travel motion actuated by 8HP FANUC Servo Motors, Belt Teeth transmission and 63mm’x10 Ball Screw. Designed 150’’ DIA 5 Axis Horizontal Machining Centers with Hydrostatic Rotary Table equipped with 100HP Servo Motor, Two speeds Planetary Gearbox, Belt Teeth Transmissions and 9’’Octagon Spindle

• Designed CNC Mill Multi Slot Cutter Machine for cutting keyway on six 2.0’’DIA bar stock on the same time.

• Structural Analysis for Machine columns, bridges, shafts and Kinematics analysis for main drive components. Mechanical Stress Analysis for gear trains used in gear boxes with speed ratio between 12- 128 and horsepower varying from 20-100Hp.

• Fluid Power Analysis of hydraulic and pneumatic components and systems, concepts and analysis of hydraulic and pneumatic schematics based on motion and load, calculation of flow rate and local and total pressure drop on fittings, pipes, control valves, gear and axial piston pumps, and linear single and double acting hydraulic cylinder.

• Performed Calculation and Sizing of Electro Drive Power units, gear boxes and transmission units for the main drive principal motion.

• Performed FEA SolidWorks Simulations for linear stress, buckling, and modal analysis on Machine Elements as part components of the Machine Tool.

• CAD Software used for Design and FEA Analysis, SolidWorks2002-2007 and AutoCAD 2002-2008. AmeROM.ENT.

Mechanical Engineer

03/2000-04/2002

• Designed Bulk Belt and Roller Conveyors with widths between 32’’-48’’ with conveyor specifications between 400’-1400’ length, capacities between 15000 ft^3/hr-45000ft^3/hr.

• Based on belt conveyor capacities and pulley drive arrangements, I performed mechanical power calculations for Electrical drives, Gear boxes, Belt transmission, Head and tail pulley, Mechanical and Gravitational Take-up, Conveyor belt, Idler Roller station selection, Structural Stress Analysis for Trusses, shafts and all structural components of the conveyor.

• Stress analysis principles using Energy Methods and Engineering principles of Solid Mechanics using methods of Nods, Section method, Displacement method, for determinates indeterminates structure.

• AutoCAD 2002 used for 2D/3D design and drafting layout. West Coast Metal Stampings

Tool Designer (Contract)

01/1997-03/2000

• Designed multi stations Progressive, Combination and Compound dies for Stamping and Forming operations like Bending, Blanking, Piercing and Drawing.

• Create and optimize strip layout for better succession of operations and more efficient utilization of material.

• Performed calculation for Mechanical Stress and deflection on Punch and Die Block, Stripper plate, Springs and Fasteners.

• Selection of tool materials and specification of heat treatment based on reliability and long lasting to wear condition and fatigue.

• Calculation of cutting, bending and drawing forces, intermediate sizing dimensions on drawing operation, assign tolerances to punches and die blocks based on part drawing precision and specification.

• Calculation the center of the resultant of cutting and forming forces, mechanical work and the power of electric drive required to the mechanical or hydraulic press.

• Selection of Mechanical Press based on tonnage required, size of dies, productivity and class of precision.

• AutoCAD14 used for design and drafting layout.

CEPROM SA

Mechanical Design Engineer

03/10/1995-02/15/1997

• Designed for 30’’, 36’’, 42’’, Belt Conveyor with width ranging from 30-42’’ and Excavation Heavy Mining Machinery and Mining equipment and Devices used in mining operations and exploitation.

• Hydraulic and Pneumatic Presses and tooling design used in the process of assembling and stamping operations.

• Performed Mechanical Stress calculation for machine components and structural elements and kinematic calculation for drives.

• Hydraulic system design, sizing, selection of commercial hydraulic pumps and motors, control valves and control units, hydraulic and pneumatic schematics.

• AutoCAD used for design and drafting layout.

TRUM SA.

Mechanical Design Engineer

09/10/1985-02/10/1995

• Designed for 30’’, 36’’, 42’’, Belt Conveyor with width ranging from 30-48’’ and Excavation and Mining equipment and Devices used in mining operations and coal exploitation.

• Hydraulic and Pneumatic Presses and tooling design used in the process of assembling and stamping operations.

• Performed Mechanical Stress calculation for machine components and structural elements and kinematic calculation for drives.

• Hydraulic system design, sizing, selection of commercial hydraulic pumps and motors, control valves and control units, hydraulic and pneumatic schematics.

• Designed Hydraulic and Pneumatic custom, made design, machines for internal used in manufacturing process.

• Network piping system design including sizing Rotary and Centrifugal pumps, Control Valves, Double Pipe and Shell and Tube Heat Exchangers.

• Mechanical stress calculation for Machine components and Structural elements, kinematic calculation for Mechanical transmission Drives and Machinery Mechanisms.

• Tool design for Assembly, Machining and Welding operations.

• Die Design for Sheet metal, Drawing, Bending, Blanking, and Piercing operations.

• AutoCAD Software used and manual drafting for design and drafting layout. EDUCATION

• Bachelor of Science Mechanical Engineering

Technical University of Cluj-Napoca, Cluj -Napoca, Romania, 06/1985

• Master of Science Mechanical Engineering, California State University Fullerton, Fullerton, CA, 2012.

• Associate of Arts Process Technology, Honors, Coastline Community College, Fountain Valley, 05/2017

• Associate of Arts Mathematics, Honors, Coastline Community College, Fountain Valley, 05/2017

• Associate of Arts Science and Mathematics, Honors, Coastline Community College, 05/2017

• Associate of Science Engineering Design Drafting, Honors, Santa Ana College 08/2017

• Associate of Science Computer Aided Engineering Design Drafting, Honors, Santa-Ana College 08/2017

• Associate of Science Industrial Drafting, High Honors, Fullerton College, High Honors 08/09/2017

• Associate of Science Manufacturing Technology, Fullerton College, High Honors 08/09/2017

• Associate of Science Electronics and Electrical Maintenance Technology, Penn Foster College, Scottdale, AZ 05/20/2022

CERTIFICATES

• El Camino College, CA, Certificate of Achievement with Honor Computer Aided Design and Drafting, 06/07/2013

• Fullerton College, Fullerton, CA Certificate of Achievement Industrial Drafting II 06/05/2015.

• Westech College, CA Advanced AUTOCAD 2000 Certificate of Completion,, December, 2000

• NCEES, National Council of Examiners for Engineering and Surveing,E.I.T. Certificate, 12/14/ 2001

• NCEES, National Council of Examiners for Engineering and Surveing, P.E. Certificate, veing,06/27/2003

• CSUF, Fullerton, CA, PRO/E 2001 Certificate of Completion, 7.2 C.E.U., January, 2002

• Westech College, CA, SolidWorks 2003 Certificate of Completion, December, 2004

• A.S.M.E, Machine Design Certificate of Completion, December, 2005

• A.S.M.E,Hydraulics and Pneumatics Certificate of Completion, July 2005

• Cleveland Institute of Electronics, OH Diploma in Industrial Electronics and PLC, July, 2005

• KETIV-Autodesk, CA Autodesk Inventor 2010, Certificate of Completion, November, 2009

• Solid Works Corp Dassault Systems, C.S.W.A. Certification, - October, 2009

• Fullerton College, CA Certificate of Completion MasterCAM X4, 6 CR.U., Fullerton, 06/2011

• AUTODESK, Autodesk Inventor User Certificate, April 2009.

• MIT-Massachusetts Institute of Technology, Mechanical Behavior of Materials, Certificate, June 2021

• Cornell University, Hands on Introduction to Engineering Simulations, ANSYS Workbench 2020, Certificate, April 2021.

• Georgia Institute of Technology, Engineering Vibration-Single Degree, Certificate, October 2021.

• Dessault Systems SolidWorks, SolidWorks CAD Fundamentals, Certificate, January 2022.

• University of Baltimore, Product Design, Prototyping and Testing, Certificate, September 2021

• MIT-Massachusetts Institute of Technology, Differential Equations:2x2 Systems, Certificate, November 11,2021

SKILLS

• Machine Design

• SolidWorks 2019, Modeling, Assembly, Drafting, Sheet Metal, Weldments, Mold, Surfaces, FEA, Mechanisms Design.

• Compound, Combination, Progressive Stampings Die Design using SolidWorks and CATIA V5.

• Jigs and Fixture Design for Machining, Welding, Forming.

• Machine Tool Design Conventional and CNC for Milling, Turning, Drilling and Forming operations.

• Gear Design.

• Shaft design.

• Geometric Dimensioning and Tolerances ASME Y14.5-2009.

• Hydraulics and Pneumatics Design, Engineering Analysis, Circuitry Synthesis, Power, Pressures and Flow rates calculations, Ladder logic, Test equipment.

• Mechanical Stress Analysis and FEA.

• Conveyors System Design Belt and Roller Chain.

• AutoCAD 2018,2D/3D, Design, Advanced features.

• CATIA V5-R21, Modeling, Assembly, Drafting, Generative Shape Design, Sheet Metal, FEA and DMU Kinematics.

• ANSYS Workbench 19-FEA Simulation, Static Structural Analysis, Steady -State Thermal Analysis, Frequency -Vibration Analysis.

• Manual CNC Programming for Milling, Drilling and Turning operations.

• CNC Programming-Mastercam 2018, 2D/3D,4 and 5 Axis

• PLC programing Allen-Brandley family SLC 500: Timer, Counter, Math, Logic, Compare, and Jump instructions.

• Microsoft Office 2016, Word, Excel, Power Point.

• MATLAB & SIMULINK 2018, Statics, Dynamics Systems, Control System Programing Applications.

• Siemens NX 12, Part Design modeling, Assembly management, Drafting and GD&T, Sheet Metal and Surfaces modeling.

• PLM and TEAM CENTER experience with NX and CATIA.

• AUTODESK INVENTOR PROFESSIONAL 2019, Design, Drafting, Sheet Metal, Weldments, FEA.

• Creo Parametric 8.0, Design, Drafting, Sheet Metal.

Contact this candidate