Benjamin Davis

** *** ******

West Leipsic OH ***56

419-***-**** / adwhy3@r.postjobfree.com

Forklift Operator

Leipsic, OH

I have years of experience in manufacturing dealing with various types of presses lathes champers, also robotics machinery. I have held leadership as well as team member positions and I enjoy the challenge of maintaining machinery and being part of a team that helps keep production flowing. I look forward to being an asset to your team and further along my experience and skill sets.

Work Experience

Eagle rail car services

Cario ohio

09-22 to 01-23

I mig welded grinded checked welds and replaces attached parts as needed

Staffmark

Lima ohio

01-22 to 09-22

I loaded and unloaded trucks as well as consaladated bays and helped out in warehouse and production floor

Forklift Operator

Findlay, OH

2015 to 2022

I have done various jobs from forklift operator to press operator and machine operator

Kill Operator

Ottawa, OH

February 2021 to March 2021

I ran an industrial mill streching steel to spec

Staffmark ottawo ohio

Forklift Operator and Machine Operator

January 2020 to February 2021

I loaded trucks with product on schedule also concoladated help restack warehouse and fixed damage product at other companys they had me at I loaded trucks with automotive parts and help the production floor keep machines stocke with empty racks and and product they needed to run that day

Forklift Operator

DHL -

Leipsic, OH

August 2019 to January 2020

Forklift Operator

I LOADED TRUCKS

July 2019 to August 2019

WITH PALLETS OF DOG FOOD ALSO PULLED PRODUCT FROM PRODUCTION LINE AND PUT IN STORAGE LOCATION TO BE HELD FOR 3 DAYS

KMI KALI9DA OHIO

FORKLIFT OPERATOR 07/01/2019 TO 08/3/2019

Forklift Operator

I LOADED TRUCKS -

Columbus, OH

June 2019 to June 2019

WITH RACKS FULL OF CAR PARTS AND HELPED OTHER FORKLIFT OPERATORS KEEP PRODUCTION WIELDERS FULL OF EMPTY RACKS AND TOOK FULL RACK TO STORAGE

PPI COLUMBUS GROVE OHIO

FORKLIFT OPERATOR 06/11/2019 TO 06/25/2019

Forklift Operator

DHL -

Findlay, OH

April 2019 to June 2019

I LOADED TRUCKS WITH RACKS FULL OF CAR PARTS ALSO I TOOK PRODUCT TO AND FROM PRODUCTION ROBOTIC WIELDERS AND PUT FINISHED PRODUCT IN STORAGE LOCATION

DHL FINDLAY OHIO

FORKLIFT OPERATOR 04/20/2019 TO 06/07/2019

Heavy Equipment Operator Front Loader

I LOADED AND UNLOADED TRUCKS

September 2018 to April 2019

09/01/2018 to 04/01/2019

I moved storm drains and loaded trucks with bad dirt also filled in graded spots with fill dirt for dovers to grade

Ems Switch Operator

Molten America USA Findlay -

Carey, OH

April 2018 to July 2018

I was responsible for running all trolley carts in the East building going in to the paint department to be painted and then going to final inspection before shipping. We made from fiberglass jeep J.L. Doors and doors also jeep J.K. doors and 4 doors these are the dog houses we also made hoods and fenders for jeep. We made hie-no semi hoods and fender along with Ken Worth hoods and fenders. At C.S.P. we made all the parts and did the first primer spray we shipped to company's where they did the final color spay then installed the J.L. and J.K.. I also helped by running presses when needed to keep production up, also I deflashed hoods and doors. I also ran forklift loading and unloading trucks along with helping move product to warehouse for storing if not ready to be shipped and bringing product out of warehouse to be loaded to fill orders so we could get shipments out on time. I also helped with keeping all machine faults reset, as well as logs, and miner maintenance that needed to be done.

Molten America USA Findlay, OHIO

Lead Paint Technician

Toyota

May 2017 to April 2018

I was responsible for running 2 industrial paint lines the vertical which had 2 new robots and the horizontal which had 1 new robot and 1 old. Their were 2 paint kitchens where all the paint was kept in kettles and mixed by formulas to be sprayed on the parts for that color of run. I mixed all of the paint for both lines. We had 42 different kittled and about 62 different color formulas also each paint line had a washer that the parts went through I had to make sure at all times the water pressure was kept up, and the soap we used full and screens that caught dirt were not full. When each run changed I put in the programs for the robots so they knew which part it was, what type of paint that needed to be sprayed for each run. I done a final inspection on all parts before they went into the dryers to be dried.At the start of each shift I ran over checking through both ovens to make sure the temperature and pressure was at specs to dry the parts,using a gauge to check the temperatures were correct at the start of each shift. Through out the day and at the end of every day I had reports to do on every thing. Also I ordered paints as needed, hardner for paints, saop for washers, screens for washers and dryers. I turned every thing in to the engineers at the end of day before going home. The company used a specific type of pumps for the paints so if the pumps quit working I took the pumps apart and rebuilt them. I did all of the maintenance to both paint lines daily if needed.We made all of our parts from injection molding machines we made parts for Toyota,Honda,Lexus,Subaru and Ford.

Heavy Equipment Operator and Crew Leader

B and K

September 2015 to April 2017

I ran a D8 high track dozer clearing and grading job sites. Also i ran off road trucks bringing old dirt and rocks out and new fill dirt.When the formen or supertendant were not around I was responsable for a 5 man crew. I did small machine maintence to the machines when needed but at the start of every day I made sure all equipment was full of water oil and hydraiic fluids.At the end of every day we all cleaned our tracks out and cleaned the equipment that had cabs.If any job had black irragation pipe to be put in I was responsable for doing it.After we got all trees and limbs or other stuff that would burn cleared I used a 330 catapilor to control and maintain the burn piles and making sure they were 1000 feet away from everything.

Crown services Georgetown KY

Forklift Operator

Custom staffing -

Findlay, OH

March 2013 to September 2014

Lead in Cylander Rebuilt Department 1

January 2010 to February 2014

I was responsable for taking dump cylanders off old train carts taking them apart cleaning them fixing the cast iron outer housing by welding plates in spots needed. On the inside I inspected for cracks if any rubbing happened I grinded abbrasions smooth then i replaced all 3 internal seals which were made of leather, when done I put the cylander back together and I put 5 gallons of hydralic fluid into the cylander checked it and put it in testing station and tested it for leaks. If everything was right I put a black silk bag around it, tagged it as rebuilt, moved it over to the other plant so when they got all repairs done on cart I could reinstall the rebuilt cylander.

Hoopaugh Grading Arrow Head Rd Charlotte NC

Charlotte, NC

May 2008 to December 2009

I ran a D6 and D8 high track dozers clearing job sites, rough grading and building building pads. Also I ran off road trucks bringing in fill dirt and dumping were needed. Also I ran a sheep foot compact roller to keep roads tight at the beginning of every day I checked all fluids on the equipment I was running that day at the end of every day I cleaned all my tracks out and checked all fluids and swept each piece of equipment out then cleaned windshield off.

Wever Construction SurfSide Myrtle Beach SC -

Myrtle Beach, SC

February 2007 to June 2008

I ran a D6 low track rack clearing job sites of trees, branches and any other debrie I gathered all of it in one pill in the middle of the site. Then I used a 330 Catapiler Escavator to dig up all tree stumps and put them in the pill also Idug uo and large rocks and loaded them in an off road truck to be dumped in dirt we were hauling off. When Igot all of it cleared I set the pill on fire when finished it usually took a day I worked on gradeing all the trash dirt out to be dumped. When I got all trash out I had good fill dirt brought in and graded down to level. At end of day I cleaned all my equipment up and cheched fluids in the norning before I started I checked my fluids also.When done I started digging my trentches with the 330 Catapiler and we laid about 1500 feet of concrete storm drains a day.

A.O Hardee and Son Little River SC

Heavy Equipment Operator

January 2006 to January 2007

I ran an old D6 DOZER pushing mud out from a job site that looked like a swamp when I got all mud out I pushed fill dirt in I also ran an off road truck a pan truck and a skid steer or boncat. All of theses machines were used to take old dirt out an put fill dirt in at the end of every day I cleaned all my tracks out checked all fluids. At the start of every shift Ichecked all the fluids in the equipment I was going to be running.

Journeymen Electrician

Parson Electric Lees Town Rd Lexington KY -

Lexington, KY

January 2003 to December 2006

I took out all old ekectrical race ways and preexzisting panels and then insalled new by the NECC guige lines amd regulations. I installed all new panels switches,plugins,light fixtures and celine fans. I also put the electrical race ways in Frietolay and programmed the robots they use today for the order pickers. I installed the fuse boxes and control panels.

Thompson Electric Pulumbo Dr Lexington KY -

Lexington, KY

February 2001 to January 2003

I was in Kentucky Technical College for electrical wireing I worked at Jonabell farms I ran new electrical race ways they built 9 horse barms 2 stables and 1 fouling shed. I installed all plaster boxes for light swiches and plugins when they finally got them built I installed the light fixtures,light switches,recepticals,smoke and carbondioxide detectors. We also put day light on out side of barns and motion activated lights in side and out. I went to scool after work 3 times a week and got my electrical liscence along witk my robotic programing and maintence knowlege.

Education

journeyman in Electrician License

Kentucky Technical College Lees Town Rd -

Lexington, KY

2001 to 2005

GED

EKU University

2005

Clinton County High School

Skills

•

I was certified from 2001-2006 by OSHA to run boom trucks along with man lifts and Jenie lift also propane forklifts and battery powered forklifts. Including how to change the gas or battery and were they should be stored along with spill prevention training.

I recieved my journeyman electrician licence in 2003 and held them till 2008. In 2007 I recieved my OSHA certification to run various types of heavy equipment. I have been trained to run various types of presses from hot steel presses to injection molding presses. I have 13 years of in seat experience running various types and sizes of forklifts and front loaders. I was trained in school how to re-program robot presses and reset faults, since I have acquired years of on job training with various types of robots from welders to painting robots including maintenance of the robots being used.

Certifications and Licenses

Journeyman Electrician

Journeyman License

Contact this candidate