Curriculum Vitae

Muhammad Imran Siddique

Contacts in KSA+966-*********

KSA -Other - +966-*********

Pak+92-333-*******=030*-*******

Email: adwerw@r.postjobfree.com

Skype Id: aimran25712

SUBJECT:

Applied for the post of, Mechanical Maintenance Supervisor” PROFILE

As a Mechanical Maintenance Equipment Supervisor & Team Leader, having More than 22 years of diverse experience in Routine & Turnaround Maintenance, and commissioning activities of different machines in Oil Refineries, Petrochemicals, and fertilizer plants. My primary duties are maintaining plant machinery including Pumps, compressors, blowers, fans, turbines, conveyors, bucket elevators, belts, centrifuges, valves, mechanical seals, Gear-Box, Bearing/Coupling, Exchangers, etc. And to ensure safe & smooth overhauling of the different types of Equipment, Alignment, Repair & Replacement of defective parts, Mechanical Seals & dry gas Seals, Routine checks, Preventive Maintenance, Corrective Maintenance, Identifying and reporting defects in the defined area, Troubleshooting, Safety of personnel, and compliance with standards, safety systems

& procedures.. Acquire a position where I utilize my experience of Plant Equipment & Machinery and pre-Commissioning and commissioning and plant startup activities, Specialties

I am a Mechanical Maintenance Supervisor Diploma holder and having extensive experience more than 22 years in the field of Plant Maintenance in Oil & Gas industry, Power Plant, Water Treatment Plant, Fertilizer Cement Plant and Petrochemical industry. I have comprehensive experience in Preventive, Predictive and Corrective maintenance activities of Rotating and Static equipment including; Steam Turbines, Gas Turbine LM-6000 GE & STG-600, Centrifugal and Reciprocating Pumps & Centrifugal and Reciprocating compressors, Fin fan coolers, Cooling Tower Fans.& Gearbox, As well as Vessel, Columns, Heat exchangers &Valves Repairing, Inspection, Pressure testing activities,

Responsibilities

To carry out the preventive, Predictive & Corrective maintenance plan of the Plant (Rotary Equipment’s).

To ensure proper safety during the execution of the job. To carry out safety talk before starting the job.

To follow Work Permit procedure accordingly with the types of jobs. Giving full support to Operation Department during Plant Startup and Shutdown as directed by operation.

Arrange Shutdown or Turnaround Job lists, butt lists and planned maintenance activities. Organize equipment related Tool Box Talk and Safety Talks. Proposal / Suggestions of modification jobs and their implementation for equipment improvement. To follow HSE standards and requirements according to OSHA guidelines. Training of new trainees along with SOPs in understandable language and practical skill improvement techniques.

To prepare Task risk assessment (TRA) of job.

To control the maintenance activities of maintenance shop in the guidance of manager According to the schedule given by maintenance department. Maintenance planning as per monthly schedule with the coordination of Dy. Manager. To maintain computerized record of employment daily basis. To be responsible of all maintenance activities on shop floor. To motivate team members for maintenance activity in shop. To be responsible other work assign by manager and Dy. manager mechanical shop. To maintain computerized record of mechanical equipment, tools and goods. To make computerized issue paper for issuing tools etc. Good oral and written communication skills.

Creative and imaginative.

Ability to either work independently or as a part of a team. Have ability to work according to the any P&ID.

Have sound ability to control and manage the the labors according to the Work schedule given by higher management.

EXPERIENCE OF SKILLS,

Complete Overhauling of Reciprocating Compressor,(Make: Dresser Rand & Ariel) Complete Overhauling of Reciprocating CO2 Compressor of Urea Plant, (Make: Nuove Pignone) Complete Overhauling of Screw Compressor

Complete Overhauling of Air Compressor by INGERSOL-RAND Complete inter-stage cooler cleaning/reclamation and overhauling of air compressor Overhauling of Single and Multi Stage Centrifugal pumps Make by Sulzer, Goulds, KSB and HMD (Seal less pumps)

Maintenance & replacement of Cooling Tower Fans & Fin Fan, Overhauling of Positive Displacement Pumps Such as Gear, Lube, Screws, types pumps Complete Overhauling of Gear Boxes, & Rotary Valve, Maintenance of Heat exchanger, Vessels, Tanks & Towers Complete Overhauling of 6 Stages (Bull Gear Driven) 20.5 MW Centrifugal Compressor (Make: Damage)

Complete overhauling of (Instrument Air and Nitrogen) Screw compressors of Atlas Copco Complete,

TRAININGS

Safety Leadership Training.(IFP)

John Crane Mechanical Seal Assembly, refurbishment & testing PTW (Permit to Work) System

Attended training on Centrifugal Compressors by CENTAC Training on Sun dyne Pump Maintenance

Attended training on “Bursting of Discs”

Attended training on Bearings.

Attend training on Scaffolding.

Agitator Inspection & Maintenance (Hands on OEM Training) First Aid

Fire Fighting

H2S safety & awareness training.

Ethics Training

Experience:

Working as a mechanical Equipment supervisor at SWCC Acciona project Khobar Saudi Arabia with Khaled Al Juffali Company from 25 Feb 2022 to 31 May 2022 Working as Commissioning Supervisor Rotating at Maaden Phosphate / DAP/NPK-Project. Saudi Arabian Mining Company Ras Al Khair Kingdom of Saudi Arabia With Dragados Gulf Construction Company From 15 th June-2017 To-30.Oct-2017

Working as Maintenance Site General Foreman at Satorp Saudi Aramco Total Refining & Petrochemicals Jubail, Kingdom of Saudi Arabia With KBR/AY From 13 th Oct-2012 To-30- November-2016

Working as Rotary Equipment Supervisor at 48MW Cogeneration project at Lotte Pakistan PTA plant with Descon engineering limited from 1st October 2011 to 30th Sep 2012; I supported Project Engineering Manager in installation & commissioning and Startup of 50 MW Gas turbine and 2 Reciprocating Compressors.

Working as “Mechanical Maintenance Technician” at NP Plant Fatima Fertilizer Company Sadiqabad, from 1st, March 2011 to 25th September 2011. Working as “Mill Wright Charge hand” at Ras Laffan Qatar With Consolidated Contracting International Co. (CCIC) (Qatar)

Pearl GTL Project from 15 th August 2008 to 18th November 2009. Working as “Mill Wright Charge hand” at Kingdom of Saudi Arabia. With Consolidated Contractors Company (CCC) Hawiyah NGL Recovery Plant Project from 08th November 2006 to 13 th August 2008.

Working as “Mechanical Maintenance Technician” at Lotte Chemical Pakistan PTA Limited. With Descon Engineering limited Company from 19 January 1998 to 15 July. 2006. Worked as “Charge hand Millwright” at Toyota Indus Bin Qasim Karachi with Descon Engineering Ltd 5 th, Dec 2010, to 25 th, Feb 2011

Overhaul/Shutdown Experience:

Worked as a Mechanical Supervisor” at ( OPA) plant Sasref With Descon Engineering, Company Jubail Saudi Arabia from 25th Dec- 2022 to 31th Jan-2023 Worked as a Mechanical Maintenance “Supervisor” at SPCO North & SPG Plant, SCP & JCP S-Chem .Saudi Chevron plant With UBSCO Engineering, Company Jubail Saudi Arabia from 1st September- 2022 to 28th November-2022

Worked as a SR Mechanical Maintenance Technician” at 250 M/W GT Gas Turbine (QIPP)

.Qurayyah Independent Power plant Saudi Arabia with Next wave Partner, Nomac Company from 15th Jan- 2022 to 10th Feb 2022

Worked as a Mechanical Maintenance “Supervisor” at ( APC ) .Saudi Advanced Petrochemical plant With ERAM Engineering, Company Jubail Saudi Arabia from 28th Feb- 2021 to 31th March 2021 in PDH At Propylene and ethylene compressors & SGT 600 GT Gas Turbine Worked as a Mechanical Maintenance “Supervisor” at S-Chem .Saudi Chevron plant With ERAM Engineering, Company Jubail Saudi Arabia from 15th October- 2019 to 3th December- 2019 in Aromax & Utility Plant, SCP & JCP

Worked as a Mechanical Maintenance “Supervisor” at Sipchem Petrochemical plant With AYTB, Company Jubail Saudi Arabia from 15th June- 2019 to 31th July 2019 Worked as a Mechanical Maintenance “Supervisor” at Tasnee Petrochemical plant With COC, Engineering Company Jubail Saudi Arabia from 24th April- 2019 to 7th May 2019 in AA .Plant Worked as a Mechanical Maintenance “Supervisor” at Tasnee Petrochemical plant With COC, Engineering Company Jubail Saudi Arabia from 19th March- 2019 to 17th April 2019 in PDH .Plant Worked as a Mechanical Maintenance “Supervisor” at Arcelor Mittal plant With GISCO, Company Jubail Saudi Arabia from 1 th Jan- 2019- 1 th Feb - 2019 (1Month Worked as a Mechanical Maintenance “Supervisor”at Sipchem Petrochemical plant With AYTB, Company Jubail Saudi Arabia from 1th September- 2018- 31th October 2018 (2 month Worked as a Mechanical Maintenance “Supervisor” at Tasnee Petrochemical A A plant With COC, Engineering Company Jubail Saudi Arabia from 20 th March- 2017- 31th May- 2017 (2 month. Worked as Rotary Equipment “Supervisor” at PVC &VCM. Petro kemya with Abdullah Al Barak & Sons Jubail Saudi Arabia. From- 1st Feb- 2017 to 15 th March 2017 (45 Days Worked as “Mechanical Maintenance “Supervisor” at Pakistan PTA Limited With Hassan Farooqui

& Company From 20 th April 2001 to 12 th, May 2001. Worked as “Mechanical Maintenance “Supervisor” at Pakistan PTA Limited. With Hassan Farooqui

& Company from 16 th July 2002 to 10 th August 2002. Worked as “Mechanical Maintenance “Supervisor” at Lal Pir Power Plant with Descon Engineering Ltd. From 20 th August 2002 to 10 th December 2002. Worked as “Mechanical Maintenance “Supervisor” at Pakistan PTA Limited. With Hassan Farooqui

& Company from 8 th January 2004 to 31 th January 2004. Worked as “Millwright Technician” at Fuji Fertilizer Bin Qasim.with Nobel Engineering (Pvt) Ltd. From 18 th November 2004 to 30 th November 2004.

Worked as “Mechanical Maintenance “Supervisor” at Pakistan PTA Limited. With Hassan Farooqui

& Company From 1w May 2005 to 31 th, May 2005.

Worked as “Mechanical Maintenance “Supervisor” at Lottee Pakistan PTA Limited With Descon Engineering Ltd From 1st, Nov to 1st, Dec 2010.

SUMMARY OF SKILLS:

COMMISSIONING & START UP EXPERIENCE

Involved in removal, Inspection and Installation of NH3, SYN, CO2 and Air Gas Compressor Bearing and Dry Gas seal removal of SYN Compressor during Commissioning. Hands on experience on Installation, Overhauling and Maintenance on Centrifugal & Reciprocating and Screw Pump & Compressors and Gearbox also Static Equipment Exchanger Vessel Column Pre commissioning, Commissioning and startup.PSSR (Pre Startup & Safety. Review), Lube oil. Flushing (Lube.oil.Circuit), Steam blowing (Steam Line Circuit), Air. Blowing, Hydro. Test, Commissioning & Startup of CW & BFW pumps, Cooling Tower Fans & Utilities area COMPRESSORS:

Centrifugal compressors:

Replacement of seals (Dry gas seals, and labyrinth seals) and bearings. Complete Overhauling of Reciprocating Compressors:

Replacement of valves, piston & piston rod, rider ring and piston rings, pressure & oil packing and Check all clearance, stage overhauling and even a complete overhaul of different compressors.

(INGRESSOL RAND, Cooper Bessemer, Peter-Brotherhood, Kobelco & Dresser Rand). VALVES: Removal and reinstallation of different kind of Valves. Shop reclamation of different valves [(Gate, Globe, Check (NRV), Butterfly, Plug, Needle, and Pressure Safety Valve (PSV)]

HEAT EXCHANGERS:

Involved in Overhauling and maintenance of Heat Exchangers, Hydro Testing, Bundle pulling Reinstallation, tube bundle re-tubing.

Re tubing Activities:

Re-tubing for Exchanger I have hand experience for tube pulling and tube inserting and tube expansion, ALIGNMENT OF ROTATING EQUIPMENTS:

Hands on Experience and Practical Knowledge on different methods of alignment:

Rim and face method

Reverse indicator method

Laser Alignment method

MECHANICAL SEALS:

Hands on Experience of Maintenance, Dis-Assembling/Assembling and repair of all types of Mechanical Seals.(John Crane, Eagle Bergmann, Flowserve, AESSEAL.) DRYER DRUM,: Installation . Alignment & Commissioning, COOLER DRUM Installation. Alignment & Commissioning, BELT CONVYER Installation. Alignment & Commissioning, GRANULATOR Installation. Alignment & Commissioning, LANGAUGE

English

Urdu

Punjabi

Hindi

HOBBIES

Play Cricket / Football. / Volley Ball

EDUCATION:

Matriculation (Science)

3 Years Diploma of Associate Engineer (D.A, E) in Mechanical Technology from Modern Institute of Information & Management Islamabad. Pakistan

PERSONAL INFORMATION:

Fathers Name : Muhammad Siddique

Date of Birth : 25th Jan 1978

Religion : Islam

Nationality : Pakistani

Passport No : AQ-1222023

Saudi Driving License: Yes. Valid

Pakistani Driving License: Yes. Valid

PREFERENCE:

Available immediately for joining duty

Muhammad Imran Siddique

Contact this candidate