Metal Mechanic Machine Technician
Resume:
Roshawn Lewis
Hot Springs National Park, AR ***** adwd79@r.postjobfree.com
To gain a job as a technician in my chosen field of industry, applying all the knowledge and experience I have gained from the US Navy as a Gas Turbine Electrical tech, Sheet Metal Mechanic, Quality Control Auditor, Demilitarization Chemical Weapons Disposal, College and other past places of employment.
Willing to relocate: Anywhere
Authorized to work in the US for any employer
Work Experience
Technician / Quality Control Inspector Kohler Plastics - Sheridan, AR
January 2017 to June 2022
•Train various personnel on operation control procedures, demonstrate how to properly identify defects per product dimensional specifications.
•Using precision tools and statistical software such as Infinity & SAP to report the development of parts, place QI hold on parts for further inspection or correction to better devise strategies to improve parts efficiency and effectiveness.
•Reading and interpreting engineering drawings, electrical schematics, and collecting/ analyzing data with Excel.
•Overseeing the developmental molding process via plastic injection of all parts/ components and toilets seats as they are being made in the production process.
•Segregating non-conforming parts in accordance with written quality procedures.
•Advise management on focused departmental targets while analyzing issues using root cause analysis tactics and systematic approach focused on Quality Control.
•Perform first article, in process and final inspections on parts also to include Quality control troubleshooting
•Direct rework of production parts under the guidance of approved current revision drawings while advising operators on proper techniques to correct flash, sort blush, pits, sinks and short shots.
•Assist Set Up Techs with answering basic machine alarms issues i.e. robot errors, correcting material to hopper and changing out molds when requested.
Slot Machine Technician
Oaklawn Racing and Gaming - Hot Springs National Park, AR December 2015 to January 2017
•Installed, troubleshot repaired electrical/ electronic, mechanical components maintained Video Gaming systems such as IGT, WMS, Scientific Games, Ballys, Dealer card shoes & Shuffle Master.
•Maintained log of service calls by utilizing service databases.
•Installed, changed and relocated games, performed game transitions and G2S upgrades.
•Troubleshot and installed Accounting System.
•Troubleshot printers and bill accepters flashing them if required
•Remove faulty components and re-install new i.e. keyboards, player tracking, monitors etc. Cleaned and tested shufflers as required upon request via radio in real=time during peak floor traffic.
Sheet Metal Mechanic
Triumph Fabrications - Hot Springs, AR July 2014 to June 2015
●Hot & Cold forming of titanium using pressurized molding machine presses.
●Die maintenance and inspection
●Used calipers, micrometers, anvil blocks, interpret drawings needed to shape, cut and titanium into specifications.
Full Time Student
ITT - Little Rock, AR December 2010 to June 2014
Full-time Business Management & Electronic Engineering student
Instrumentation Technician Washington Grp Intl/ URS Corp - Whitehall, AR February 2009 to June 2012
●Calibrated, troubleshot, performed Preventive & Corrective maintenance on various smart instruments, electonic / electrical control systems and various other machines.
●Instructed new techs in instrumentation calibration & electrical practices. To include minor mechanical such as pneumatic pumps, pressure control valves " I to P", switches, gages and various other instrumentation devices and equipment in a chemical nerve agent throughout the plant also used caustics up to 18% in pollution abatement system.
●Donned SCBA's while sealed via suit sealer inside Demilitarized Protective Ensembles for Level A Toxic Cubical/ Exclusionary area entries.
Instrument Technician
Parsons, US Army Newport Chemical Plant - Newport, IN November 2005 to February 2009
●Calibrated, troubleshot and performed Preventive & Corrective maintenance.
●instructed new techs in instrumentation calibration, pneumatic pumps, pressure control valves " I to P", switches, gages and various other instrumentation devices
●Performed Osha Level A ( Demilitarized protective Ensemble DPE) exclusionary/ Toxic Cubic entries to maintain equipment in a chemical nerve agent using electronics measuring devices for caustics and other chemicals used during the neutralization process.
(Petty Officer Sec Class ) Gas Turbine Electrical 2nd Class Surface warfare GSE2(sw)
UNITED STATES NAVY
September 1993 to June 2005
●Served as a Gas Turbine Systems Electrical technician Work center Supervisor/ Calibration Team Leader
●Was responsible for maintaining the Preventive & Corrective maintenance scheduled for the GSE work center
●Trained, troubleshot, served as a watch stander for the Gas Turbine Engine plant, Electrical Power and Auxiliary Machinery plants i.e. Potable water systems and High/ Low Pressure Air plants
●Calibrated all Gage Cal devices, electonic control systems to include Free Standing Electonic controllers and other sub systems that governs or supports the Gas Turbine LM2500 or Allison 501 K17.
Education
OSHA 40 Hour Training Certification (Cert # 757968) in Hazardous Waste Operations and Emergency Response
National Environmental Trainers - Little Rock, AR May 2015 to June 2015
AAS in Business Management ITT Technical Institute - Little Rock, AR June 2014
AAS in Cmptr & Electronics Eng ITT Technical Institute - Little Rock, AR September 2012
US Army Hazmat Nerve Agent Operator in OSHA Level A, B & C readiness, donning SCBA's and Demilitarized Protective Ensemble
US Army Aberdeen Proving Ground - Aberdeen Proving Ground, MD September 2009 to October 2009
Certification in (GSE) Gas Turbine Electrical "C" School
US Navy Service School Command - Great Lakes, IL March 2003 to July 2003
Certificate in Metrology Calibration School
US Navy Shore Intermediate Mainteance Activity - Norfolk, VA April 2000 to May 2000
Military Training in (GSE) Gas Turbine Electrical "A" School
US Navy Service School Command - Great Lakes, IL December 1995 to June 1996
High school or equivalent in General Studies
William Penn Highschool - Philadelphia, PA September 1989 to June 1993
Skills
•Caliper (10+ years)
•Inspection (10+ years)
•Quality Inspector (2 years)
•Quality Control (8 years)
•SAP, Infinity, Microsoft Office to incluxe Excel, Pwr Point and Word. (2 years)
•Quality Assurance (8 years)
•Micrometer (10+ years)
•Electronics (10+ years)
•Electrical (10+ years)
•First article inspection (2 years)
•Instrumentation Calibration (10+ years)
•Gast Tubine Engines (10+ years)
•Hazmat Material (8 years)
•QA
•Ppap
•Statistical Software
•Manufacturing
•Lean Manufacturing
•Six Sigma
•ISO 9001
•5S
•Root Cause Analysis
•Leadership
•Programmable logic controllers
•Industrial equipment
•Mechanical knowledge
•Basic math
•Computer skills
Military Service
Branch: Navy
Service Country: United States Rank: E-5
September 1993 to June 2005
Gas Turbine Electrical Tech Metrology/ Instrument Calibration Work Center Supervisor
Commendations:
2 Navy & Marine Corps Achievement
Awards
Alpha Beta Kappa
Highest scholastic achievement completing 1st of my class in Electronic Engineering Technology
National Technical Honor Society
June 2014
Exceptional Scholastic Achievement in Business Management studies at ITT Technical Institute
Certifications and Licenses
Lean Six Sigma Yellow Belt
May 2017 to Present
Comprehending and creating the SIPOC Diagram Overview of Process Mapping
C&E Matrix
Effects Analysis along with Failure Modes Fundamental Statistics
Minitab Introduction
Developing Graphs (fundamental quality tools)
Contact this candidate