ALEJANDRO ALMEIDA

** *. *** ****** *** Apt#*, Pasadena, CA 91107

adw3a0@r.postjobfree.com * 323-***-****

Local *** * UBC ID: 9006-7780

Summary

Responsible, energetic and organized Journeyman carpenter seeking a career in general carpentry. Equipped with the tools to complete tasks in a timely and safe manner. Embracing challenges to acquire new skills. Pursuing career advancement opportunities. Work Experience

Riesgraf Installation Co Inc. (09/22 to 11/22)

Target Stores

1621 S. Alameda St., Compton, CA 90220

5731 Bickett St., Huntington Park, CA 90255

200 W. Orangethrope, Fullerton, CA 92832

- Commercial Fixture Installations

- Assembled and installed double sided gondola units, metro racks, industrial shelving units and light & heavy duty pallet racks. Assembled fixtures, leveled, plumbed and anchored to concrete.

A-2 Railla Development Inc. (06/21 to 09/21)

Washington Apartments (Low Income Housing)

720 Washington Blvd., Los Angeles, CA 90015

- Residential Wood Framing

- Assisted in the building of multi-unit apartment building. Duties consisted of rough framing of walls, windows, doors, corbels, roof, soffits and floors while implementing safety Implemented safety training. Laid out measurements for cuts i.e.: studs, plywood, joists, rafters etc. Installed connectors, utilized fasteners. Organized material and hardware for easy access and high work flow. Scrapped out and maintained a clean work space. Maintained tools and equipment in satisfactory working condition. Red tagged damaged or inoperable tools.

- Equipment operated: scissor lift and forklift-rough terrain.

- Power and pneumatic tools used: framing gun, hardware gun and powder actuated gun, oscillating tool, reciprocating saw, circular saw and miter saw. Split beam laser level used for guidance.

Civil Works Corp (11/20 to 04/21)

Rancho Cienega Sports and Recreation Center/Compton and Long Beach Colleges Los Angeles, CA

- Concrete Forming - Built and laid out forms for foundation, footings, slabs, ADA accessible ramps. Duties included manual digging, shoring placement, bushing, rebar and epoxy placement with inspector supervision, concrete pouring, manual shoveling, tying rebar, cutting material, drilling holes and overall aspects of the job. Placed snap ties, taper ties, John A brackets, hairpins, all thread w/cat head washers and other hardware. Stripped forms and panels, stocked/organized material as well as hardware for easy access. Scrapped out and kept a clean work area. Monitored and eliminated any hazards for a safe work space.

- Power tools used: Hammer drills, drill guns, impact wrench, rotor hammer and circular saw, angle grinder, reciprocating saw.

- Safety equipment used: harness and retracting lifelines. Specialty Installations Inc. (09/19 to 02/20)

Berendo Middle School - Los Angeles, CA 90006

Roosevelt High School - Los Angeles, CA 90033

Northridge Middle School - Northridge, CA 91325

Venice High School - Los Angeles, CA 90066

- Assembled and Installed 2 Tier Locker units plus Benches for School Gyms.

- Assisted journeyman with layout, drilling holes, placing anchor bolts, cutting material to proper dimension, leveling base, connecting lockers, shelves, doors and installing benches. Mounted trimming, set combination locks and riveted number tags. Assembled and Erected partitions. Unloaded company trucks. Stocked and organized material as well as hardware and tools.

- Equipment used: industrial forklift.

- Power tools used: hammer drills, drills, drill drivers, miter saw, circular saw.

- PPE Used: face shields, gloves, ear plugs.

Ford D.C

North Central Animal Shelter (08/19 to 09/19)

3201 Lacy Street, Los Angeles, CA 90031

- Installed interior and exterior wood siding and molding/trim. Created story pole for

layout. Cut siding to length and angle for turn arounds and corners, screwed and face nailed to walls.

- Power tools: Miter saw, Finish nail gun, Sander

- Equipment used : Scissor lift

J.R.H. Construction (06/19 to 09/19)

Euclid Elementary School

Ontario, California 91762

- Elementary School Seismic Retro Fit- Framed gable, flat and barrel roofs. Replaced 1st level classrooms floor.

- Duties were exercising safety while framing roof, prepared measurements for cuts

(i.e. ledgers, common rafters, joists, ridge boards, fascia, soffits and plywood). Drilled holes on existing building for rebar and epoxy placement with inspector supervision. Replaced hardware and connectors. Stripped and replaced classroom sub floor sheathing including rotted joists. Organized conex container (i.e. material and hardware, power tools). Monitored water for heat illness prevention and maintained a clean work space.

- Safety equipment used: harness, life line.

- Equipment operated: scissor lift and forklift-rough terrain.

- Power and pneumatic tools used: framing gun, hardware gun, oscillating tool, Reciprocating saw, circular saw and miter saw.

Advanced Equipment Corporation

LA SoFi Stadium (09/18 to 12/18)

Inglewood, California 90305

- Installation of stadium suite/private box glass partitions. Drilled holes on structural steel beams, measured, cut, leveled tracks using rotating leveling laser and fastened. Put up glass partitions while exercising safety. Stocked, organized material and hardware.

- Power tools used: drills, drill drivers, miter saw and angle grinder.

- Safety equipment used: harness, retracting lines, face shields. MURRCO Construction Inc.

LAX (10/17 to 1/18 and 4/18 to 7/18)

7001 World Way West, Los Angeles, CA 90045

- Assisted journeyman in building sewer access points/manholes Duties included cutting, drilling holes, framing forms, placed snap ties, taper ties and other hardware. Installed water stops, monitored and logged confined space entrants, oxygen, carbon monoxide and gas levels for safe work. Rigging panels, assisted in placing gang forms while exercising safety. Stripped, organized and stocked material as well as hardware, stocked and distributed water to crews for heat illness or dehydration prevention, scrapped out and kept a clean work area.

- Power tools used: drills, impact, rotor hammer, hammer drill and circular saw.

- Safety equipment used: harness, oxygen and multi gas sniffer and retracting lifelines. Metropolitan Water District (1/18 to 4/18)

3972 Valley View Avenue, Yorba Linda, CA 92886

- Foundation and retaining wall addition. Building ADA accessible ramps. Manual digging, shoring placement, bushing, rebar and epoxy placement with inspector supervision, assisted with concrete pouring. Assisted journeyman with cutting and drilling holes, helped with overall framing of forms, placed snap ties and hardware. Stripped, and stocked/organized material as well as hardware for easy access. Scrapped out and kept a clean work area. Monitored and eliminated any hazards for a safe work space.

- Power tools used: hammer drill, rotor hammer, drills, impact driver and circular saw. Premiere Installations

Waldorf Astoria Hotel (1/17 to 7/17)

9850 Wilshire Blvd., Beverly Hills, CA 90210

- Cabinet, base cabinet, molding, trim and furniture assembly plus installation. Assisted with marking dimensions for layout. Made cut outs for proper fitting, fastened hardware, supports and mounted units. Stocked and organized material plus hardware. Monitored and eliminated any hazards for a safe work space.

- Power tools used: impact, drill, jig saw, circular saw and router.

- Equipment operated: industrial forklift

Performance Contracting Inc.

Westfield Mall (6/16 to 8/16)

10250 Santa Monica Blvd., Los Angeles, CA 90067

G.I.L.E.A.D. Medical Research Building (4/16 to 6/16) 1800 S. Wheeler Ave., La Verne, CA 91750

- Assisted in metal framing as well as drywall hanging, implemented safety training for accident prevention. Prepared measurements, cut studs, track and drywall board. Organized and took inventory of material and hardware. Scrapped and maintained a clean work space. Red tagged damaged or inoperable tools.

- Equipment operated: scissor lift

- Power and pneumatic tools used: drywall screw gun, circular saw and chop saw. Split beam laser level used for guidance.

Federal Courthouse (1/16 to 4/16)

350 W. 1st St., Los Angeles, CA 90012

- Raised floor installation utilized rotating laser. Assisted with layout performed concrete tile cutting and hardware set up. Joined and fastened concrete tile. Organized material and hardware for easy access, high work flow.

- Power tools used: impact, drill, band saw and angle grinder. Genessy Management & Development LLC

334 N. Normandie Avenue, Suite 104, Los Angeles, CA 90004

(November 2010 - September 2020)

Building Superintendent - Resident Manager (11/2010 to 9/2020)

- Oversee a 16 unit subsidized apartment complex. Duties include living on-site, respond to emergencies, maintenance, maintain a clean environment, distribute memos, show rental units, apartment inspections, and complete move-ins of new residents. Collect and post rents, monitor outside vendors, assist with annual and interim recertifications, interact with tenants and support management staff. Report lease violations and/or criminal activity, memos, tenant letters, violations, complaints, legal matters and evictions. Utilize Yardi software to complete office functions. Perform other related duties as assigned.

Field Supervisor/Inspector (2/2011 to 10/2014)

- Handled all inspections from the City of Los Angeles (SCEP), HUD (REAC), Housing Authority (Section 8), CalHFA, CTCAC, compliance reviews and responses. Yardi software to complete work orders and other office functions. Maintenance complaints, memos, tenant letters.

Maintenance Department (Apprentice) (11/2014 to 12/2015)

- Job consisted of construction, repairs, and installations. Projects and improvements included kitchen cabinets, countertops, vanities, pre-hung doors, locking mechanisms, closets (i.e. shelves, hanging rods and doors). Floor tile, smoke and carbon monoxide detectors, garbage disposals, light fixtures and blinds. Assisted journeyman with measuring spaces for proper installments, cutting wood, fitting hardware into cabinetry, fixing components into walls, nailing, fastening, minor plumbing. Other duties performed – patching drywall and concrete, painting, replacing weather-stripping, door stoppers and electrical outlet covers, waxing floors, changing plumbing fixtures and appliance installation.

- Power and pneumatic tools used: framing gun, hardware gun, drill driver, impact driver, oscillating tool, sander, plainer, router reciprocating saw, circular saw and compound miter saw. Split beam laser level used for guidance. UBC Training Certifications

OSHA 10 4/6/16

Fall protection 10/3/17

First Aid/CPR/AED 10/2/22

Scaffold erector/user (welded frame/mobile tower) 8/24/16 Powered industrial truck operator (rough terrain) 6/25/16 Education and Training

Southwest Carpenter Training Center / Rio Hondo College 2016 to 2022

- General carpentry, job safety and health, apprentice responsibilities, measurements, arithmetic.

Brother’s Keeper Boot Camp (UBC-SWCTF) 2015

- Pre-apprentice

Los Angeles Trade Tech Community College 2014

- Uniform building codes, pre-electrical craft helper Other

Bilingual: English-Spanish (read, write and speak) Computer Skills: Microsoft Word and Excel

Contact this candidate