Anthony Garcia Cell 409-***-****

**** **** ****** *** ******, Houston, Texas 77084

adw19p@r.postjobfree.com

Objective

(SSHE) Regulatory Tech – SHEMS/Air/FERC/Reg. Compliance, where demonstrated strengths in the areas of innovative problem-solving techniques, analyzing, perceiving, investigating, and troubleshooting skills will contribute to the increased recovery of Assets and Reduce Losses using proven accounting techniques and methods.

Background summary

Extensive experience in the LNG Process, Chemical Manufacturing Industry with an emphasis on Computer Programming and Implementation, Process Computer Systems (Hardware), Quality Assurance Chemistry Laboratory, Quality Assurance Computer manufacturing, Mod Computer Systems, Production, Maintenance, Turnaround Planning, and supervision to include:

Budget planning & Risk assessment

Safety and Environmental regulatory agency compliance

Lockout/Tagout procedure development

Confined Space Entry procedures

OSHA, RCRA, Serious Incident Investigations

Emergency Response Team

Work process improvement

Capital project experience, engineering, and execution phases

Polymer plant.

Revised/Modified existing Job Procedures per ISO 9001 requirements

Site-specific training, Hot Work Permit procedure development, and publication

Equipment specifications expertise

Rotating Equipment expertise

Unit Optimization, Hydrocarbons, Epoxy

Design and Development of new programming of a computer system for a Small Project to install new equipment in the manufacturing plant.

System Integrator. (Project management, programming/configuration, testing, constructions, installations, commissioning, and startup).

Implemented training courses for new recruits — speeding profitability.

(CS 3000, ProSafe RS, Foundation Fieldbus, PRM, CAM, Exapilot, and Historian).

Software modifications, new design sequences for crude oil transfer system, implement cause and effect logic, change graphics, and support startup.

Developed System Requirement Specification documentation for I/O layout, design, programming, and implementation of regeneration sequence.

Program CS Batch sequence and developed recipe management.

Maintained and supported PCS system for polymer plant.

Support daily refinery operations for Instrumentation and Control System.

Generated management of changed (MOC) documents, working on production optimization.

Worked on daily productions and quality reports.

Managed and coordinated Maintenance and Operations schedules.

Monitored daily process operations.

Document Control as per ISO 9001 Process Controlled versus Uncon

PROFESSIONAL ACCOMPLISHMENTS

Designed and perform the Development roles of a small Project in a Hydrocarbons unit to install a new Distillation Tower overhead Reflux System. Wrote, Simulated, and Loaded the New Programming Code into the plant in a timely manner. This small project was keeping the plant safe and operating at a much higher Production rate of ~ $50,000 per day’s production.

Developed and theorized a plan to resolve a problem after 3 months of having pressure problems in a Distillation Section of a plant that was operating at 1/3 of the designed operating capability. Through investigation and Data gathering my conclusion was that the culprit was a piping flaw in the venting piping of the unit. The piping was modified, and the Finishing Section resumed to the Maximum operating capability. The constrained rate versus the normal operating rate equaled to 1500 #/hr or $100,000 per day.

Demonstrated initiative and innovation by quickly learning a new Technology and Acid Process, bypassing Training review on a Glycidol Methacrylate Acid Plant in Freeport Texas. This New Process was designed to take 6-7 months of intense Study, and I completed it in 1.5 months. This allowed me to help train new operators and, I was able to be on the Startup Team of this process, thus saving the Company ~ $5000 of overtime pay that was to be paid to overworked personnel during startup.

EMPLOYMENT EXPERIENCE-

AIR

Ensure understanding of Emission Permit requirements, CEMS DAHS including data backup, DAHS required report preparation, and finalization for internal or external reporting.

All air compliance obligations (Terminal & PL)

EPA GHG data collection including PI and DCS use and GHG report preparation and submission via GGRT post-management approval’s required Monthly Excess Emissions & Quarterly HTF Heater Run Time Reports (rpt. pulled from DAHS, checked for errors/DAHS/HTF Heater discrepancies and printed/saved for TCEQ review)

TCEQ required Semi-Ann. Excess Emissions & CEMS Operability Rpt. completion rpt. reviewed and submitted to TCEQ & EPA.

FERC

Ensure compliance with Terminal FERC FEIS & Order.

FERC Plans/Procedures; Strike Avoidance Conservation Measures (ships)

FERC Compliance Lead – prepare documentation, email correspondence, lead FERC Annual Audit including audit compliance follow-up action items as required by FERC

FERC Semi-Annual Operational Rpt. – Meet quarterly with L.T. for report prep.; submit the approved report electronically to FERC.

Terminal Field Audit – FERC Compliance

OTHER

Creation of HSE monthly metrics, Env. KPIs & “Highlights” as applicable to your position.

Waste management weekly/annual field inspection and report duties; waste shipping SME.

Monitor XOM waste vendor & disposal site list as applicable to GPLNG at least annually to ensure GP using XOM-approved vendors/disposal sites.

Periodically lead and/or present Monthly Safety Meetings.

Preparation for Monthly Safety Meetings including Mo. HSE Metris with Lead/Lag Indicators & room setup.

Create/maintain a “position-specific” task obligation calendar.

SAP HSE PM completion and close-out.

TX and La (Term. & PL) Tier II Annual report creation and submission.

Keep TCEQ Potable Water Operator license. Perform all Pot. Water Operator duties including shift on-call duties.

Attend Federal/State waste training including proper waste shipping

Leading/Lagging Indicator Log Maintenance.

Certifications needed & to be maintained:

RCRA Haz Waste – EPA and Texas waste rules

DOT Shipping Paper

Terminal & PL Waste Management Activities

Weekly Terminal inventory and inspection

Monthly Terminal Inspection

Responsible for offsite shipment coordination

Golden Pass LNG (Sabine Pass Texas)

Regulatory Tech – SHEMS/Air/FERC/Reg. Compliance

Golden Pass LNG Terminal in Sabine Pass Texas. Golden Pass LNG LLC, the owner of the Golden Pass LNG Terminal, is 70 percent owned by an affiliate of Qatar Petroleum, with affiliates of ExxonMobil each owning a share in the balance of the interest in the terminal. (2013- Present)

Coordination of SHEMS (Safety/Health/Environment Management Systems)

Familiar w/ SHEM Systems

Administrator for SHEM System 1-A, 4-B, 6-C & 11-A

S.T. Meeting preparation and facilitation

S.T. Owner/Adm. due date stewardship and follow-up

Set S.T. goals, and ensure S.T. Charter is followed.

Ensure requirements of ea. Systems are being met by ea. Owner and Administrator

Maintain SHEMS documentation.

Lead SHEMS Annual Internal Assessments – coordinate/train team dates. Assessment facilitation. Document and follow-up action items to closure.

Chevron Phillips Chemical

Process Operator During my employment at the Chevron Chemical Plant in Port Arthur Texas, I was given the responsibilities for the Olefins processes which include Ethylene, propylene, and other olefins for use as building blocks for other chemicals, plastics, and fibers. (2006- 2007)

Foxconn LLC

Quality Engineer Promoted to the position of Quality Engineer in the CIA Manufacturing Area of Foxconn LLC. Areas of responsibility are Tracking and reporting on Production and Monitoring and Analyzing Raw Data to Develop Processes and procedures to increase quality and Production. Other duties are to Supervise and Manage 10 Quality Auditors in the CIA Daily operation of the Customer Integrity Audit Processes on the Production Line. Using various Computer Applications including Excel, MS Office tools, and Databases, develop and present process data to report trends and analysis. Using ISO 9001 guidelines, changed the structure of the existing Process Documents at Foxconnn Houston Site. (2005- 2006)

Foxconn LLC

Quality Auditor Technician, Responsible for Testing and auditing various PC Desktops, Portables, and Handheld devices to assure the proper specifications are met. This position is for Foxconn LLP in Houston Texas. This included the Checkout and Testing Software and Hardware to ensure the integrity and reliability of the product. As per ISO 9001 guidelines worked on reformatting the Foxconn SOP including adding revision tables. (2004-2005)

The Dow Chemical Company

Process Control Technician: Responsible for designing the developing computer programming for the Mod Computer systems that are in operation at the Freeport site. This included the Checkout and Simulations for any Code developed to ensure the integrity and reliability of the program. (2000-2004)

Process Control Technician, in 1998, after completing many Classes and courses (Brazosport College, Dow Training Departments, etc.) that Dow required to be accepted into the Process Control Group at the Texas Operations Site I was accepted into this Group. My job responsibilities included my new job at Freeport. I Worked on the New Hybrid Epoxidaton Reactor in Epoxy Block B6200, writing Dowtran Code for 3 different Unit Operations. (1998-1999)

EDUCATIONAL BACKGROUND

Graduate, Brazosport High School, Freeport, Texas

1 year, Brazosport College, Lake Jackson, Texas – Computer Programming

Training and Certifications

Dowtran Programmers Course

Dowtran Dowpics Maintenance

Time Management – Franklin

Contact this candidate