Pipe Fitter Energy Center
Resume:
James Robinson
Florence, South Carolina 29501
0-843-***-**** (Cell)
Email:********.*******@***.***
OBJECTIVE:
I want a position as a Journeyman Pipe Fitter, Pipe Foreman or Commissioning Start Up within a gas turbine power plant, Fossil Burners, or any other plant that’s looking for a journeyman pipe fitter.
SUMMARY OF QUALIFICATIONS:
Over 20 years as an experienced commercial and residential painter, 3 years of experience as an Electrician; 3 years of experience in Industrial Electronics; and 18 years of experience as a journeymen pipe fitter. I have the ability to work with diverse groups and the ability to learn quickly. I am a competent journeymen pipe fitter with the experience, training, and technical knowledge to plan, install, maintain, repair, and oversee pipefitting projects in commercial and industrial settings.I am reliable and productive pipe fitter with the ability to work without supervision and I strictly adhere to preventive maintenance and safety practice. I am OSHA 30 certified. I have my TWIC security card and Association Reciprocal Safety Councils, Certification.
EMPLOYMENT
October 4, 2021 April 20, 2023
B L Harbert International, LLC
820 Shades Creek Parkway, Suite 3000
Birmingham, AL 35209
Ph.# 205-***-****
Read prints, lay out various sizes and types of pipe. Prep and fab up fittings and pipe for welds and installation for cooling, steam, water, oil and nitrogen systems. Install pipe supports and hangers. Install sizes and types of valves. Sweat copper pipe and install.
July 8, 2021 September 30, 2021
McGee Enterprise, Inc.
4341 Charlotte Highway
Suite 204
Lake Wylie, SC 29710-7062
Ph.# 803-***-****
Prep stainless steel pipe and fit it for welder to weld for installation . Pipping of various sizes and
Fittings to be prep for various systems such as steam, gas, lube oil, seal oil, nitrogen and air lines. Bolt up flanges, install screw pipe, and various sizes and types of valves. Fabricate different sizes and types pipe supports. Hydro and air test all piping systems.
September 12, 2019 May 24, 2021
Southern Industrial Company
Triangle Drive
Raleigh, N. C. 27617
David Watson
Prep and fab pipe to be weld and install in various piping systems {steam, lube oil, seal oil, nitrogen, air lines} and other systems as needed. Bolt up flanges of different sizes. Use various power and hand tools. Perform maintenance task as needed. Demo pipe and replace with new pipe. Hydro test piping and install supports.
November 8, 2018 April 20, 2019
Austin Maintenance & Construction
2801 E. 13 Street
LA Porte, TX 77571
Read ISO’s,lay out various size and types of pipe. Prep and fab up fittings and pipe for welds and installation for cooling, steam, water, gas, and nitrogen systems. Install supports and pipe hangers. Install various type and sizes valves. Tie into equipment and various other task.
February 05,2018 June 26, 2018
Flour Constructions
Duke Energy Project
Crystal River, Fla.
Read ISO’s, P&ID and Blue Prints drawings Prep piping, fittings and valves for welding. Install cooling, air, steam, water and gas systems piping. Install various pipe hanger and supports. Perform hydro and pneumatic testing of piping systems.
November 02, 2017 - December 05, 2017
Gemma Power Plant
3439 Cincinnati Dayton Rd.
Middletown, OH> 45044
Pipe Foreman
Install, maintain, and trouble shoot problems, demonstrates my abilities to work without direct supervision. Plan out daily activities for employees and assist general foreman with gathering up material to give crews for there daily duties. Consistently follow workplace safety procedures. Participates in toolbox topics, safety audits and related safety function.
January 11, 2016 - June 22, 2017
PCL Construction
1385 Rock Spring Rd
Rising Sun, MD
Pipe Fitter JM – Start Up Mechanical Foreman
January 12, 2015 October 18,2015
Turner Industrial Group
215 Highlandia Dr.
Baton Rough, LA. 70810
Read ISO’s P&ID and Blue Print drawings. Prep and fab up fittings and pipe for weld and install in cooling, steam, water, gas, nitrogen systems. Install supports and pipe hangers. Hydro and pneumatic testing of piping systems for start up. Bolt up fittings.
November 03, 2014 January 09, 2015
Flour Construction
6700 Las Colinas Blvd.
Irving, Tx. 75039
Ph# 469-***-****
Read ISO’s, lay out various size and types of steel piping systems and prep pipe and fittings for welding and installation. Install supports and hanger for piping systems . Use hand tools and power tools for prepping material. Work at high elevations on scaffolds, man lifts, and JLG.
October 01, 2014 October 30, 2014
Repcon Inc.
38385 Highway 30
Gonzales, LA 70737
Phone# 225-***-****
Journeyman Pipe Fitter
Inspect and test pipes with equipment for accuracy of assembly and run hydro test. Make bolt up unto flanges and valves. Cut out pipe to make repairs unto the piping systems and re-install pipe to bring system back up. Use hand tools and power tools. High and low pressure testing of systems.
February, 10, 2014 – April 2014
Zachry Industrial, Inc.
400 Kendrick Ln.
Front Royal, Va. 22630
Ph… 561-***-****
Journeyman Pipe Fitter
Lay out, assembly, install and maintain piping systems.
Pipe hangers, pipe supports and related hydraulic, pneumatic equipment for steam, hot water, heating, cooling, lubricating, and fuel gas systems. Read ISO’s and blue prints. Appling knowledge of system operation and following instruction and safety procedures.
April 2014 – June 2014
Performance Contractors Inc.
9901 Pecue Lane
Baton Rouge, La. 70810
Ph…225-***-****
Journeyman Pipe Fitter
Read and interpret blue prints, ISO’s drawing, and P&ID drawing for installation procedures. Prep carbon, stainless piping for welding and installation. Install valves and fittings. Install pipe supports and hangers.
October, 03, 2013 November 08, 2013
Turner Industries Group
215 Highland Drive
Baton Rouge, LA. 70810
Ph... 800-***-**** or 225-***-****
Journeyman Pipe Fitter
Read and interpret IO’s drawings. Cut out valves and re-install then. Repair piping systems too steam, cooling and lubrication systems. Abide by all safety procedures, fabricate carbon, and stainless steel piping for fit up too be weld and installation. Inspect and test pipe for quality.
April 02, 2013
Fagan Inc.
501 W. Hwy.212
P. O. Box 159
Granite Falls, MN.56241
South Boston Energy Center
1225 Plywood Trail
South Boston, VA.24592
Pipe Foreman
Read and interpret ISO’sdrawing, Blueprints and P&ID drawing for installation of piping systems procedures. Supervise employees and assist in planning daily task for the building of the plant.
January 2012 – February 2013
Shaw Construction – Pipe Forman & Commissioner Forman over Mechanics
Eden, NC
Read and interpret blueprints, isometric drawing, and P&ID drawing for installation procedures.Installed carbon piping, stainless steel piping, control valves, check valves, globe valves,HPDE piping and prep, and other fittings.Inspect and test pipes with equipment for accuracy of assembly and installation. Set the system up for testing; test the system for its performance; ran test for steam blows, check gas and nitrogen and hydrogen; prepared plant for operation; insured everything for mechanical is working properly; shutdown system and restore for operation for commercial operation and performance. Turned the system over to the client.
February 2011 – January 2012
Shaw Construction – Commissioner Forman & Pipe Forman over Mechanics
Salisbury, NC
Read and interpret blueprints, isometric drawing, and P&ID drawing for installation procedures.Installed carbon piping, stainless steel piping, control valves, check valves, globe valves,HPDE piping and prep, and other fittings.Inspect and test pipes with equipment for accuracy of assembly and installation. Set the system up for testing; test the system for its performance; ran test for steam blows, check gas for nitrogen and hydrogen; prepared plant for operation; insured everything for mechanical is working properly; shut system own and restore for operation for commercial operation and performance. Turned the system over to the client.
August 2010 – February 2011
KBR – Pipe Fitter
Charleston, SC
Read and interpret blueprints, isometric drawing, and P&ID drawing for installation procedures.Installed carbon piping, stainless steel piping, control valves, check valves, globe valves,HPDE piping and prep, and other fittings.Inspect and test pipes with equipment for accuracy of assembly and installation.
September 2009 - August 2010
Shaw Construction – Pipe Fitter
Gaffney, SC
Read and interpret blueprints, isometric drawing, and P&ID drawing for installation procedures.Installed carbon piping, stainless steel piping, control valves, check valves, globe valves,HPDE piping and prep, and other fittings.Inspect and test pipes with equipment for accuracy of assembly and installation.
January 12, 2009 – September 2009
Shaw Const
ruction - Pipe Fitter
Newburg, Md.
Read and interpret blueprints, isometric drawing, and P&ID drawing for installation procedures.Installed carbon piping, stainless steel piping, control valves, check valves, globe valves,HPDE piping and prep, and other fittings.Inspect and test pipes with equipment for accuracy of assembly and installation.
December 15, 2008 thru January 5, 2009
CTR Group - Pipe Fitter
Jacksonville, Fl.
Cut out pipe and valves to steam line and repaired; Re-installed new pipes and prepped material; Performed lockouts and tag outs to energize systems.
Worked with various sizes pipe and used power and hand tools.
September 2008 – October 2008
Tradesman International - Pipe Fitter
Elkton, VA
Fabricated and installed Conley pipe, prep pipe. Grind and cut pipe. Installed hangers and supports. Laid out valve stations prepped valves and fittings; made fits for welder to weld and installed. Read ISO’s and planned daily task. Worked with various size pipes; Used power tools and hand tools.
May 2008 - September 2008
TIC Industrial – Pipe Fitter
St. Petersburg, Fl.
Fabricate and install processed pipes. Prep pipes, valves, and fittings for welding fabricate, prep and installed hangers and supports. Cut pipes of various sizes with power tools; torch, fit, designed and installed carbon and stainless steel pipe. Read ISO’s, and plan daily task
December 2007 - May 2008
Industrial Tradesman – Pipe Fitter
Portland, Maine
Fabricated and prep carbon and stainless steel pipe for installation; Prep pipe, valves, and various sizes fittings to be inline to motors and pumps installation.
Cut pipes with torch plasma cutter and power tools to fit, and design pipes for installation. Lay out line and read ISO’s to design pipe and install
July 2007 - November 2007
Carolina Energy Industrial –Pipe Fitter
Landover, Ca.
Fabricated and installed processed pipes. Prep pipes for welding. Prep hangers and supports and install. Cut pipes of various sizes with power tools and torch; fitted design and installed carbon and stainless steel pipes
November 2006 - July 2007
Teton Industrial – Pipe Fitter
Cross, South Carolina
Fabricate and installed processed pipes. Prep pipe for welding and installed.
Cut pipes of various sizes with power tools and torch. Fitted design and installed various fittings, and valves
February 2006 - November 2006
Lockwood Greene Industry – Pipe Fitter
Columbia, South Carolina
Fabricated and installed processed pipe; Cut pipes in various sizes with power tool and torch; Fitted, designed, and installed carbon and stainless steel pipes
Replaced damage valves, cut out, and replaced boiler tubs
May 2005 - August 2004
Perennial Construction, LLC – Pipe Fitter
White Plains, Georgia
Fabricated and installed processed pipes; Fabricated and installed hangers and support for installation; Prepped copper pipe to be installed; Sweat copper fittings as need; Worked with carbon steel, stainless steel, and copper tubing
October 2003 - May 2004
Pipe Fitter
Zachary Construction Corp.
Eastover, South Carolina
Worked with maintenance crew on piping systems and valve replacement
March 2002 - April 2003
Sanders Brothers, Inc., - Pipe Fitter
Gaffney, South Carolina
Fabricated and installed process pipes; Cut pipes of various sizes with torch and power tools; Made fits, designed, and installed carbon steel and stainless steel pipes; Installed control valves; Constructed lay-outs for the installation of the systems.
October 1998 January 2000
Becon Construction – Pipe Fitter
Mooresville, North Carolina
Replaced all main steam lines to boiler; Fitted all heavy wall piping systems
June 1998 - October 1998
Charter Marine – Pipe Fitter
Jacksonville, Florida
Demolition of piping system to reinstall new system; Overhaul of piping system and valve; Cutting, prepping and fitting of new piping systems
EDUCATION
State Board Of Education
Columbia, South Carolina
High School Equivalency Diploma - Successfully completed academic courses
Palmetto Unified School District #1
Bennettsville, South Carolina
Industrial Electronics and Core Electronics
Successfully completed 1440 hours of instruction in Automotive Mechanics
REFERENCES
References given upon request
Contact this candidate