SUMMARY

Have ** years of experience seasoned in electronics and computer technology. My goal and objectives are to secure position which offers opportunities for professional growth where I can contribute my skills and abilities in a professional environment.

September 2019-Current

MHE Technician II/Contractor

EWR9 Amazon

United States

Maintained a good working relationship across all the board within the organization Maintained and troubleshoot robotically automated, electrical, and mechanical systems.

Maintained a good working relationship across-the-board all the board.

Experienced with Industrial electrical, and Industrial motor controllers. Limit switches, proximity sensors, timers, solenoids, Servo drives, f frequency inverters, linear drives, tach, and encoders.

Assisted other mechanics with diverse types of equipment. Experienced with SL2 Sorter, and SC3 Dematic Cross belt sorter.

Daily, schedule, assigned work orders, and ensure PM, PDM tools, and Waite Wireless 100% efficiency.

MHE II Maintenance Technician/C&W Services EWR9 Amazon Fulfillment Center

2019 - Oct 2022 · 3 yrs. 2 mos.

United States Carteret, NJ 07008United States Carteret, NJ 07008

Maintained a good working relationship across all the board within the organization Maintained and troubleshoot robotic automated, electrical, and mechanical systems.

Maintained a good working relationship across all the board. Experienced with Industrial electrical, and Industrial motor controllers.

Limit switches, proximity sensors, timers, solenoids, Servo drives, frequency inverters, linear drives, tach, and encoders.

Assisted other mechanics on diverse types of equipment. Experienced with SL2 Sorter, and SC3 Dematic Cross belt sorter.

Daily, schedules, assigned work orders and ensure PM 100% efficiency.

assist other techs diagnosing, trouble shooting and repair on conveyor equipment when a malfunction has been detected.

Resolving problems fast to minimize down time with no or minimum supervision Maintained a good working relationship across all the board within the organization Maintained and troubleshoot robotic automated, electrical, and mechanical systems. Maintained a good working relationship across all the board. Experienced with Industrial electrical, and Industrial motor controllers. Limit switches, proximity sensors, timers, solenoids, Servo drives, frequency cy inverters, linear drives, tach, and encoders.

Assisted other mechanics on diverse types of equipment. Experienced with SL2 Sorter, and SC3 Dematic Cross belt sorter. Daily, schedules, assigned work orders and ensure PM 100% efficiency. Assist other techs diagnosing, trouble shooting and repair on conveyor equipment when a malfunction has been detected. Resolving problems fast to minimize down time with no or minimum supervision

Zimmer Biomet

Preventive Maintenance Technician (Contractor) Parsippany, NJ, 07054

Jun 2018 - Feb 2019 · 9 mos.

Designs and manufactures and distributes throughout the country for the medical industries replacing orthopedic, reconstructive, spinal, dental and trauma devices. These orthopedic devices include hip, knee, and extremity reconstructive devices, cervical and lumbar spinal devices, dental, bone for filling devices under strict FDA standards.

It is the policy of Zimmer to train employees a require the use of personal protective equipment to protect workers from hazards safety conditions in the work environment.

Maintenance Technicians, we as a team performed daily, weekly. monthly, quarterly preventive maintenance on all plant systems.

Monday thru Sunday 24/7days per week between shifts. Reclaim tanks check pH balances daily have been stabilized between 7.0pH and 11.0pH, When the pH has stabilized in the reclaim tanks it's okay send the wastewater to city sewer. Exchanged gauges, mass flow controllers every 30days are replaced with calibrated ones. Pneumatic actuators, Hydraulics, butterfly and ball valves, magnetic drive pump.

hydrogen, chlorine, argon gas, argon, liquid, nitrogen, breathing air. Worked with SAP systems to input daily work orders and close work orders by the end of every shift.

Designs and manufactures and distributes throughout the country for the medical industries replacing orthopedic, reconstructive, spinal, dental and trauma devices. These orthopedic devices include hip, knee, and extremity reconstructive devices, cervical and lumbar spinal devices, dental, bone for filling devices under strict FDA standards. It is the policy of Zimmer to train employees a require the use of personal protective equipment to protect workers from hazards safety conditions in the work environment. Maintenance Technicians, we as a team performed daily, weekly. monthly, quarterly preventive maintenance on all plant systems. Monday thru Sunday 24/7days per week between shifts. Reclaim tanks check pH balances daily have been stabilized between 7.0pH and 11.0pH, When the pH has stabilized in the reclaim tanks it's okay send the wastewater to city sewer. Exchanged gauges, mass flow controllers every 30days are replaced with calibrated ones. Pneumatic actuators, Hydraulic s, butterfly and ball valves, magnetic drive pump. hydrogen, chlorine, argon gas, argon, liquid, nitrogen, breathing air. Worked with SAP systems to input daily work orders and close work orders by the end of every shift.

FUJIFILM Holdings America Corporation

Depot Repair: Bench Electronics Technician II Edison NJ

Apr 2007 - Nov 2017 · 10 yrs. 8 mos.

Troubleshoot to find the causes for poor image quality, which is often caused by defective or dirty parts, such as rollers, thermal dye sub print heads and they may repair or replace print-heads, which wear out from overuse or mass printing. I'm also trained by Copal Corporation on their photo imaging equipment and use a variety of tools, including multimeter, jigs, pliers, and screwdrivers, calibrating tools. Troubleshoot to find the causes for poor image quality, which is often caused by defective or dirty parts, such as rollers, thermal dye sub print heads and they may repair or replace print-heads, which wear out from overuse or mass printing. I'm also trained by Copal Corporation on their photo imaging equipment and use a variety of tools, including multimeter, jigs, pliers, and screwdrivers, calibrating tools.

Customer Engineering Services ·

Depot Repair: Electronics Technician II/Refurbishing/Installation Mgr. Apr 2007 - Nov 2017 · 10 yrs. 8 mos.

Edison, NJ (HLUS) · On-site

Ask series: 2000,2500, 4000, Film scanner series Sp 500, Xerox Phaser, DX 100, EX100 series Responsible for maintaining customers equipment. Duties include performing initial system diagnostics, repair/replace failing components update machines to the latest firmware level specifications.

Hallmark: Mark 7L (electro-mechanical) Silver Recovery System commercial recycling service designed for treating Fixer from X-Ray and Graphic Arts as well as Fixer/Bleach Fix from Mini-labs original equipment manufacturer trained on Hallmark systems. Fuji Film (USB/Standalone) devices dry lab printers Ask series: 2000,2500, 4000, Film scanner series Sp 500, Xerox Phaser, DX 100, EX100 series Responsible for maintaining customers equipment. Duties include performing initial system diagnostics, repair/replace failing components update machines to the latest firmware level specifications. Hallmark: Mark 7L (electro-mechanical) Silver Recovery System commercial recycling service designed for treating Fixer from X-Ray and Graphic Arts as well as Fixer/Bleach Fix from Mini- labs original equipment manufacturer trained on Hallmark systems.

Hosokawa Micron Powder Systems Plant/Technician Contractor Dec 2004 - Apr 2007 · 2 yrs. 5 mos. Summit NJ

Cleaned systems and set-up equipment ready job request orders mixed or blended to formulas and jet-milled batches by the spec

Monitored production, sample powders with computer system measuring the scale small granules with a-01 -05 deferential in data and adjust the process as needed. Performed preventive maintenance on production equipment. Diagnose problems with systems gearboxes, drivers and replace faulty mechanical and electrical components of the equipment.

Cleaned systems and set-up equipment ready job request orders mixed or blended to formulas and jet- milled batches by the spec Monitored production, sample powders with computer system measuring the scale small granules with a-01 -05 deferential in data and adjust the process as needed. Performed preventive maintenance on production equipment. Diagnose problems with systems gearboxes, drivers and replace faulty mechanical and electrical components of the equipment.

SKILLS:

NFPA 70E Certificate of Completion, Variable Frequency Drives

PLCs: Allen Bradley, Siemens Waite Wireless Software PDM Tools

RME Control Cabinets TAC 101 RME Control Cabinets TAC 201 RME Root Cause Analysis 101 RME Root Cause Analysis 201

RME- Resetting Breakers Above 40 Cal/cm^2 Authorized Hazardous Energy Control (LOTO) Training Benchmarking Knowledge Check: RME 3.1.2 Smart Pac CW Safety- COVID-19 PPE Training

Hazmat Spill Cleanup Response

RME- A Zero Safety Incident Workplace RME Electrical Safe Work Practices Robot Cell Safety 101 Training

Robot Cell Safety 102 Training

EDUCATION

Lincoln Technical Institute

•Edison, New Jersey, United States

1981-1983

Certification

Union County Vocational Technical School

Certificate, Certification Apprenticeship in Graphic Arts

(1981 - 1983)

Diploma

Plainfield High School

•University Preparatory and Advanced High School

•United States

• (1978 - 1982)

Clayton Waters

MHE Technician II

Newark, New Jersey, United States

+1-973-***-****

advza6@r.postjobfree.com

www.linkedin.com/in/clayton

www.fujifilm.com

cesservice.com

Contact this candidate