mechanical Engineer,inspection Engineer,Rbi engineer

CURRICULAM VITAE

Nikunj Prabhubhai Solanki

Mob : Mob: +966-*********(Saudi Arabia) +91-983*******(India), Email: *********@*****.***

Profile at a Glance

An incisive professional with over 13 years Onshore / Offshore of enriching experience in Static equipment, pipeline, GRP, Welding, In-service inspection.

Experience in RBI inspector on site and Meridium version V4.3.0.5.9 for Equipment, Piping Dead leg, injection point marking on Isometric drawing and P&Id’s, updating PL’s

Experience In handling all Types of NDT Activities in onshore / offshore.

Inspection and testing of equipment in-service.

Excellent experience with multi-disciplinary QA/QC activities as inspection planning.

Experience with multi-disciplinary static equipment QA/QC activities.

Proven skills in preparation/review of procedures, ITPs, Check lists, and internal audits.

An effective communicator with excellent interpersonal and relationship management skills.

.

ACADEMIC QUALIFICATIONS

DIPLOMA IN MECHANICAL ENGINEERING

Indira Gandhi Institute Of Technology & Management (2005-2008) PROFESSIONAL QUALIFICATIONS

API Certification:

API-510 Pressure Vessel Inspector. Certificate No. 64146. CSWIP Certifications:

CSWIP-3.1 Welding Inspector. Certificate No. 72662. ASNT Certifications:

ASNT Level II in PT, MT, RTFI, UT.

Professional Training course attended on Tube inspection MS 5800 Meridium (RBI):

Professional Training course attended through Tasnee version V4.3.0.5.9 Inservice:

Client : TASNEE (National Industrialization Company) Designation : Static Plant inspector (Inservice, PDH PLANT) Period : November 2015 To Till Date.

Location : Jubail, Saudi Arabia.

Turnaround support : PDH-PP Plant TA-2016, 2019 & 2022,EC Plant TA 2022 and Shutdowns. Static inservice inspector

Attending Onstream and external inspection of static equipment in the plant as per Master Inspection Plan / RBI or Non-RBI inspection plan.

Inspect and to provide recommendation to carryout corrective actions (replacement or repair) for concerns / failures related to static equipment’s of PDH & Utility plants based on the inspection findings.

Evaluating the condition and ensuring the integrity of static equipment’s (pressure vessels, heat exchangers, reactors, columns, storage tanks, WHB, heaters etc.) and piping of the complex.

Witnessing NDT activities like DPT, UT, R.T, and RFET, IRIS and reviewing of RT Films.

Preparation of inspection plans and method statements for equipment and selecting proper technique of NDT during Shut down as per equipment history/material / time base/equipment criticality / API codes/ equipment RBI strategies and previous inspection findings.

Inspection post Hydro jetting cleanings, RFET, Shell/Tube Tests of exchangers.

Dealing with emergencies during equipment failures, recommending temporary repair works and following up welding and stage wise inspection activities.

Inspection and witnessing pressure test of relief valves at shop

Witnessing hydro tests and pneumatic tests as per inspection plan

Involved with shutdowns/turnarounds from initial package preparation stage to final summary reporting.

Stage wise inspection and NDT activities for repair activities and welding jobs in static equipment and pipelines.

Seawater/cooling water nonmetallic GRP piping, Repair activity and witnessing barcol test. RBI facilitator

Marking of corrosion loops for Equipment, Piping circuits, Dead leg, injection point on Isometric drawing and P&Id’s as per agreement of the RBI review meetings.

Data entry and update for data revalidation on Meridium version V4.3.0.5.9

Update and data validation in meridium UT thickness and preparing Static equipment and piping reports.

Develop new piping circuits with RBI engineer for missing line in the existing meridium data base to be uploaded in meriduim (TM Module) with creation of inspection profile.

Involve with corrosion engineer activities in order to accomplish the revalidation of corrosion loops.

Include equipment and piping which are not included previously in the Meriduim program by developing new circuits with RBI team and creating optimum CML points and upload the data base.

To determine remaining service life of equipment’s and piping based on the inspection findings.

Organization : SHARQ (SABIC)

Designation : Static inspector.

Period : March 2013 To APRIL 2013

Location : Al-Jubail, Saudi Arabia.

Responsibility’s : Static Equipment inspection during TA.

Internal inspection during shutdown to check the condition conditions of tube bundle, tubes, baffles, shell internal wall, nozzles, channel, etc.

Perform visual inspection of tube bundle before cleaning. Immediately after it is pulled out Check general condition of the tube bundle and tube sheet for any types of mechanical damage, distortion, deposits and abnormalities or fouling. Collect sample of the deposit / corrosion products for laboratory analysis.

Inspect shell for internal corrosion, particularly the bottom side area where corrosive products can accumulate and baffle plates-shell contact area etc.

Inspect the tube-sheet face and TTS joints for signs of corrosion erosion or pitting. Apply suitable NDT technique as applicable.

Overall NDT inspection activities prior, before and after the welding.

Carry out stage wise inspection in according with approval QAP, and relevant client specifications and applicable standards.

Reviewing all NDT reports before submitting.

Ensure all NDT is done before the box up.

Participates in meeting with the prospective Clients representing during T/A. Organization : IBN SINA (SABIC)

Designation : Piping inspector.

Period : August 2010 To Feb 2011

Location : Al-Jubail, Saudi Arabia.

Responsibility’s : Piping inspection during TML project.

As per RBI PM Plan perfume visual inspection for piping, support and connecting structure.

Reviewing UT Thickness report.

Organization : IBN SINA (SABIC)

Designation : Static inspector.

Period : August 2010 To Feb 2011

Location : Al-Jubail, Saudi Arabia.

Responsibility’s : RX’s header inspection during TA.

Perform Leak test of Rx Header expansion bellows.

Carried out stage wise visual inspection of RX’s header weld joint and expansion bellows.

Monitoring of welding works welding fit-ups, root gap, root face, bevel edges.

Verification of welding parameters (Pre-heat and Inter-pass temperature) & condition of consumable electrode, flux, filler wire, shielding gas as a third-party inspector.

Carrying out visual inspection for welds prior to client inspection.

Ensuring all weld defects is repaired.

Ensuring that weld consumables are issued properly in accordance with the weld consumables procedure.

Co-ordination with NDT crew and vendors.

Organization : SAFCO (SABIC)

Designation : Static inspector.

Period : Feb 2010 To JUNE 2010

Location : Al-Jubail, Saudi Arabia.

Responsibility’s : Static Equipment inspection.

Involved with shutdowns/turnarounds from initial planning stage to final summary reporting.

Preparation of shutdown method statements/inspection planning for static equipment and pipelines based on equipment RBI strategies and previous inspection findings.

Internal inspection of columns, heat exchangers, storage tanks, reactors, vessels, filters.

Stage wise Inspection of exchanger re-tubing task.

Witnessing hydro test & stage wise inspection during maintenance activities.

Stage wise inspection and NDT activities for repair activities and welding jobs in static equipment and pipelines.

Internal inspection during shutdown to check the condition conditions of tube bundle, tubes, baffles, shell internal wall, nozzles, channel, etc.

Perform visual inspection of tube bundle before cleaning. Immediately after it is pulled out. Check general condition of the tube bundle and tube sheet for any types of mechanical damage, distortion, deposits and abnormalities or fouling. Collect sample of the deposit / corrosion products for laboratory analysis.

Inspect shell for internal corrosion, particularly the bottom side area where corrosive products can accumulate and baffle plates-shell contact area etc.

Inspect the tube-sheet face and TTS joints for signs of corrosion erosion or pitting. Apply suitable NDT technique as applicable.

Reviewing all NDT reports before submitting.

Participates in meeting with the prospective Clients representing during T/A. CONSTRUCTION PROJECTS:

Client : SAMSUNG SAUDI ARABIA LTD

Designation : Welding Inspector.

Period : January 2015 To September 2015

Location : Jubail, Saudi Arabia & SHAYBAH (GOS-4) Saudi Arabia.

Witnessing NDT activities like DPT, UT, R.T and reviewing of RT Films.

Welder qualification to ensure welding quality and preparing welder certificate.

Preparing WPS and PQR.

Organization : SATORP

Client : CIA

Period : September 2013 To September 2013

Designation : Coker Drum Inspection (After construction first video inspection) Location : Jubail, Saudi Arabia.

Operating camera by remote.

Remote Video Inspection and supporting to prepare report based on video graph findings. Organization : TÜV Rheinland

Designation : Welding Engineer.

Period : JUNE 2013 To JULY 2013

Location : QURAYYAH, Saudi Arabia.

Witnessing NDT activities like DPT, UT, R.T and reviewing of RT Films.

Welder qualification to ensure welding quality and preparing welder certificate.

Preparing WPS and PQR.

Organization : TASNEE

Client : Dow chemical / Moody International (INTERTEK) Designation : Material Engineer (Construction project-SAMCO). Period : JUNE 2012 To JANUARY 2013

Location : Al-Jubail, Saudi Arabia

Inspecting received Material based on isomeric and quality plan.

Witnessing PMI and NDT activities like DPT, UT, R.T and reviewing of RT Films.

Participates meeting with the prospective Clients and submitting daily updates. Organization : PETRORABIGH (Saudi Aramco Site)

Client :TEKFEN INSAAT VE TESTSAT A.S

Designation : Welding inspector, NDT Inspector.

Period : Feb 2009 To Dec 2009.

Location : Jeddah (Rabigh), Saudi Arabia.

Monitoring of welding works welding fit-ups, root gap, root face, bevel edges.

Verification of welding parameters (Preheat, Inter-pass temperature, Inter-pass cleaning) & condition of consumable electrode, flux, filler wire, shielding gas as a third party inspector.

Carrying out visual inspection for welds prior to client inspection. Company Name : TECHNIP (KJO Al Khafji Joint Operations) Location : AL KHAFJI, K.S.A.

Period : September 2014 To December 2014

Position : Mechanical Inspector.

Responsibilities :

Witnessing and receiving on site material and coordinating with supervisors.

Witnessing NDT activities like DPT, UT, R.T and reviewing of RT Films.

Fallow offshore safety procedure.

Participates in daily toolbox meeting with the prospective Clients. Personal Details

Passport No : L 9947469

Date of Issue : 26.06.2014

Date of Expiry : 25.06.2024

Place of Issue : Thane(Mumbai)

Date of birth : 26-04-1986

Marital status : Married

Languages known : English, Hindi, Gujarati & Marathi Nikunj Prabhubhai Solanki

Witnessing NDT activities like DPT, UT, R.T and reviewing of RT Films. Offshore:

Contact this candidate