Donald J McGregor

**** ***** **** ******

Hope Mills, NC 283481

910-***-****

advwx7@r.postjobfree.com

WORK EXPERIENCE

November, 2021 to Present

Integra Foods Inc Bladenboro, NC

Job Title: Maintenance electrician

Duties include installation, repair along with upgrading used equipment to accommodate our needs. I have also-ran new electrical services for outside car charging stations, a new air compressor and a new trash compactor. I was lais off due to lack of work.

February, 2021 to November, 2021 Reaford, NC

Burlington Industries Evaluate Textiles

Job Title: Electrician

My duties are to troubleshoot and repair electrical issues with, winding, twisting, dying, backwashing with pindrafting along with other supporting equipment. we manufacture thread that is sent to another plant to be made into cloth for use in our US military uniforms.

.

November 2018 To January 2020

Nitta Gelatin NUA Fayetteville, NC

Job Title: Electrician

My duties as an electrician were to troubleshoot repair and install various 480- and 120-volt motors, pumps, VFD’s and various types of machinery. My role as an electrician was not limited to just electrical, I also did mechanical repairs on all equipment

December 2016 To November 2018

Quickie Manufacturing Company Lumberton, NC

Job Title: Staple set mechanic

My duties include repair and setup of staple machine. The rebuilding of older machines to make them run more efficiently is also a major function of the maintenance department. In November I switched over to the Injection Molding department to assist in the predictive maintenance of the 18 injection molding machines they have. This entails repairing oil leaks and replacing any worn-out components that may not be repaired.

April 2012 to July 2016 (RETIRED)

ITW Release and Trim Richton Park, IL

Job Title: Maintenance Electrician / Automation

I am presently assigned to the 3rd shift doing machine repairs as needed and working with the automation. We currently have three completely automated assembly lines running off the Injection Molding machines. We also have numerous automated assembly machine working as stand-alone assembly. I oversee all trouble shooting and repairs for my shift. November, 2011 to April, 2012

Flex-O-Glass Inc. Chicago, IL

Job Title: Maintenance Electrician

Maintain and upgrade extrusion and auxiliary equipment. Also implemented a better PM program than what they had in place. Organized the stock room because they had parts everywhere. This made for an easier running inventory. October, 2009 to November, 2011

Inx--- International Homewood, IL

Job Title: 3rd Shift Maintenance Technician

Duties: Maintain all filling equipment to include dispensing lines, Pneumatic pumps, lines and filtration equipment. I do fabrications and Installation upgrades to mixers and fill line dispensers which involves Welding, cutting and reading from prints. I also do various types of Preventive and predictive maintenance on all equipment. May, 2009 to October, 2009 and March, 2010 to May, 2010 Manpower / Zip Pak

Manteno, IL

Job title: Maintenance Electrician

Duties: Maintenance on Air conditioner units, installation of new Extruders and redevelopment of winding machinery. The rebuilding of their Winders used in the extrusion process were redone by the use of a PLC and Touch screen making it more functional and for less wear and tear on the 24/7 operation. I have worked there twice as a replacement for one of the maintenance men that had been out sick. From March through May I worked on a temporary basis 3 days a week.

August, 2007 to December, 2008

Home Products International Chicago, IL

Job Title: Lead Maintenance Electrician

Duties: Maintenance on Cincinnati Injection Molding machines from 725 ton to 2500 ton Hydraulic and Toggle. Maintenance on all auxiliary equipment to include: thermolators, grinders, tower and chiller pumps and motors, DME controllers, assorted packaging machines, and material loading equipment. I worked with manufacturers doing installs on new equipment to include running conduit, pipe fitting and running power to new equipment My position was to help others on my shift with troubleshooting hydraulic, pneumatic, and electrical issues and do special projects as needed.

August, 2006 to August, 2007

SCA Thermosafe, Inc

Beecher, IL

Job Title: Maintenance Electrician

Duties: Maintenance on roto molding machines, Pulverizer and color mixers, ordering spare parts and coordinating outside vendors for contract work. Preventive maintenance is a big part of the operation of our equipment and facility. I did all the installation and upgrading of equipment and retro fitting of new devices to better our productivity. I also work on documentation for achieving our ISO certification May, 2005 to August 2006

Prairie Packaging, Inc. Bedford Park, IL

Maintenance/Electrician

Duties: Maintenance and installation of new equipment and preventive maintenance of equipment. There are 37 injection molding machines to include 12 Toshiba and 25 Krauss Maffei with 16 Whitman Pick and Place Robots and 5 Vortex Robots. I did all the electrical installations on the night shift of electrical outlets, motor replacements overhead door controls and troubleshooting of electrical malfunctions on machines, robots and building We are all in charge of our own sections of machines to maintain and do preventive maintenance on. Our preventive maintenance includes daily, biweekly, monthly and annual, I also did all the parts ordering for my machines and replacement these parts. June, 1999 to May, 2005

Allmetal, Inc. Bensenville, IL

Maintenance Manager

Duties: Maintenance and installation of new machines and auxiliary equipment. Preventive maintenance was a big part of this job because our machines were old and required daily preventive maintenance to keep them running and in top working condition. I also did all of the parts ordering and inventory of parts and equipment. We had 28 injection molding machines to include 26 Arburg and 2 Toshiba presses also 28 Conair pickers and 2 Geiger pickers.

September, 1990 to June, 1999

Kiehl Engineering Bensenville, IL

Duties: I oversaw 10 men including the janitorial staff, all of the PM scheduling, Predictive maintenance scheduling, and ISO training. I did all of the paperwork on job specifications and job titles, and standards for ISO qualifications. As a department we had 60 injection molding machines, 25 Conair Sepro pick and place robots and 20 Conair Sprew Pickers. We had 20 Engel injection molding machines, one of which was a 2-color press, 8 Van Dron HT machines, and 32 De Mag machines Summary

I am an Army veteran with over 30 years of experience in the maintenance field. I was a licensed electrician in Las Vegas, Nevada, Rochester, New York, and in Atlanta, Ga. As an electrician I preformed electrical installations of various machinery, panels, buck and boost transformers, fire alarm systems and alarm systems. I have built custom robots for various forms of part removal and placement of parts. I helped in the building of the water treatment facility at the Kerr Magee Chemical Company in Henderson, Nevada. I also did a lot of the new construction layouts of the slabs and underground wiring for new housing tracts and commercial buildings, also electrical signs and the cooling Towers at the Power plant in the Moapa Valley, Nevada. Also, back in the 70’s I worked for Conrail as a lineman working on the poles, installing new pole lines and rehabbing the railroad crossings along the main line from Buffalo, New York to New Haven, Connecticut.

Contact this candidate