Lab Technician Control Analyst
Resume:
Jason Solis
La Marque, Texas **568
advuwr@r.postjobfree.com
W O R K E X P E R I E N C E
TECH 2000/OXY CHEM VINYLS CONTRACTOR
QC LAB TECHNICIAN, JAN 2022-JUNE 2022
●Conducted routine and non-routine analyses on vinyl chloride samples, ethyl dichloride samples, numerous hydrocarbon samples, raw materials, and finished products.
●Calibrated and validated instruments daily.
●Ran QC standards on instruments nightly.
●Analyzed and interpreted GC data results.
●Ran titrations to analyze and determine acid percentage in samples.
●Performed moisture percentage analysis of oils,acids,vinyl, and ethyl dichloride products.
●Performed specific gravity analysis on samples
●Performed ammonia percentage testing on water samples
●Performed Total Organic Carbon testing on samples
●Performed metals testing by Atomic Absorption
●Performed Gas Chromatography testing on water,oil,vinyl,ethyl dichloride,and various other liquid and gas samples.
●Maintained and documented lab supply gases levels
●Used LIMS DATA SYSTEMS for data capture and relay results to operators and engineering.
●Maintained lab supplies throughout the lab
●Performed weekly testing of safety showers and eye washes
●Performed weekly environmental water testing of outfalls within the plant
TECH 2000/LUMMUS TECHNOLOGY CONTRACTOR
QA LAB TECHNICIAN, April 2020-Oct 2020
●Conducted routine and non-routine analyses on polypropylene samples, numerous hydrocarbon samples, raw materials,and finished products.
●Calibrated and validated instruments daily.
●Ran QC standards on instruments nightly.
●Analyzed and interpreted GC data results.
●Ran titrations to analyze and determine acid percentage in samples.
●Performed moisture percentage analysis of acids.
●Performed bromine percentage and mercaptan percentage analysis
●Ran sulfur and nitrogen analysis
●Performed specific gravity analysis on samples
●Ran Meltflow analysis on polypropylene samples
●Ran particle size analysis on polypropylene
●Performed numerous gc testing on multiple hydrocarbon samples.
●Maintained and documented lab supply gases levels
●Performed hi temp gc distillations
●Used LIMS DATA SYSTEMS for data capture and relay to operators and engineering.
S&S PROFESSIONALS/BASF CONTRACTOR
QA LAB TECHNICIAN, MAY 2019 – April 2020
●Conducts routine and non-routine analyses of in-process materials, raw materials, water environmental samples, finished product samples, stability samples, and control standards.
●Calibrates, validates, and maintains laboratory equipment.
●Performs site specific analyses and complies laboratory test data.
●Interprets test data and finished results by comparing them to established specifications and control limits. Relays test results backed by control standards.
●Receives, inspects, and test raw materials before implementation in the unit process.
●Checks and maintains quality controls for testing and calibrates instruments.
●Test and approves final products daily
●Runs standards daily and reports results in a database for global quality within the company
●Instruments used in lab: Agilent HPLC 1100,1200,1260; Agilent 6850 GC; Shimadzu TOC-V analyzer; Metrohm OMNIC Titrator; Mettler Toledo T70 Titrator; Thermo Scientific Centrifuge Legend XT; Hettich Centrifuge Rotina 380; Hach DR3900 Spectrophotometer; Mettler Toledo V20 Volumetric KF Titrator(moisture); Horiba Oil Content Analyzer; ATAGO Refractometer; Mettler Toledo HB43 moisture/solids; Hunterlab Lab Scan XE Colorimeter; Quantachrome Tapped Density Analyzer; and WTW Cond197i Conductivity Meter.
KOCIDE, HOUSTON, Texas
QC LAB TECHNICIAN, Apr 2017 – Aug 2018
●Conduct routine and non-routine analyses of in-process materials, raw materials, environmental
samples, finished goods, or stability samples.
●Calibrate, validate, or maintain laboratory equipment.
●Compile laboratory test data and perform appropriate analyses
●Interprets test results and compares them to established specifications and control limits, and make
recommendations on appropriateness of data for release.
●Receive and inspect raw materials.
●Identify and troubleshoot equipment problems.
●Perform visual inspections of finished products.
●Analyzed in process samples and finished product samples.
●Analyzed raw materials for approval of use
●Tested and approved final product daily
●Checked and maintained quality control on instruments
●Instruments used in lab: Malvern Mastersizer 2000&3000 particle size analyzer; Thermo Fisher Scientific ICP 6500; Thermo Jarrell Ash Iris ICP; Thermo Fisher particle microscope; Cole-Parmer pH meter; Mettler Toledo HB43 moisture/solid analyzer; and PCE Instruments Colorimeter.
DUPONT, Houston, Texas
QUALITY CONTROL ANALYST, Apr 2006 – Apr 2017
●Conduct routine and non-routine analyses of in-process materials, raw materials, environmental
samples, finished goods, or stability samples.
●Calibrate, validate, or maintain laboratory equipment.
●Identify quality problems and recommend solutions.
●Compile laboratory test data and perform appropriate analyses.
●Receive and inspect raw materials.
●Supply quality control data necessary for regulatory submissions.
●Ensure that lab cleanliness and safety standards are maintained.
●Identify and troubleshoot equipment problems
●Perform visual inspections of finished products.
●Conducted in process sample analyses and reported results
●Tested and approved final product samples
●Maintained lab chemical inventory
●Serviced and maintained lab instruments
●Conducted lab audits of instruments and laboratory chemicals
●Instruments used in lab: Malvern Mastersizer 2000&3000 particle size analyzer; Thermo Fisher Scientific ICP 6500; Thermo Jarrell Ash Iris ICP; Thermo Fisher particle microscope; Cole-Parmer pH meter; Mettler Toledo HB43 moisture/solid analyzer; and PCE Instruments Colorimeter.
●
MARATHON OIL, Texas City, Texas
LABORATORY TECHNICIAN, Oct 1998 – Oct 2003
●Monitor product quality to ensure compliance with standards and specifications.
●Set up and conduct chemical experiments, tests, and analyses, using techniques such as chromatography, spectroscopy, physical or chemical separation techniques, or microscopy.
●Compile and interpret results of tests and analyses.
●Provide and maintain a safe work environment by participating in safety programs, committees, or teams and by conducting laboratory or plant safety audits.
●Maintain, clean, or sterilize laboratory instruments or equipment
●Order and inventory materials to maintain supplies.
●Prepare chemical solutions for products or processes, following standardized formulas, or create experimental formulas.
●Provide technical support or assistance to chemists or engineers.
●Analyzed and reported results of in process samples
●Tested final product for quality control approval
●Tested environmental and water samples for EPA compliance
●Analyzed in pipeline gas samples for purity
●Analyzed raw materials and feed product like raw crude oil for purity
●Instruments used in the lab: HP5890 GC, Horiba Sulfur Analyzer SLFA-2100; ISL/PAC D86 5G2 Automatic Distillation Analyzer; Automated Closed Cup Pensky Martens Flash Point Analyzer ISL/PAC; Minolta Colorimeter; Anton-Paar Viscometer; and Hach COD Meter.
E D U C A T I O N
La Marque High School, La Marque, Texas
High School Diploma, Jun 1993
●7th in a class of 1200 students
●National Honor Student
●Scholar Athlete in Football and Baseball(4 years)
College of the Mainland, Texas City, Texas
Associates of Science and Associates of Arts, May 1997
College of the Mainland, Texas City, Texas Associates of Petrochemical Sciences, Dec 1998
University of Texas - Pan American, Edinburg, Texas
Completed coursework towards Bachelor Degree of Science, Jun 1995 Attended undergraduate studies for my Bachelor's of Science Participated and played in Collegiate Baseball
University of Texas - San Antonio, San Antonio, Texas
Completed coursework towards Bachelor Degree of Science, Jan 1996 Completed undergraduate studies for my Bachelor's of Sciences Participated in Collegiate Baseball program
A D D I T I O N A L S K I L L S
●I have owned and operated a motorsports business for 20 years
●I am very knowledgeable in computers and programming
●I am very mechanically knowledgable and proficient in mechanics
●Safety and fire trained
●HAZWOPER trained
Contact this candidate