Mechanical Designer - CREO
Resume:
GEORGE SAND
PO Box **
Galeton, PA *****
advue9@r.postjobfree.com
SUMMARY
Designer with strong creative and cost reduction skills; recognized for consistently high quality and quantity of work, strong work ethic with unusual willingness to work effectively for long hours; highly adaptable. Ability to work independently and as part of a team.
WORK EXPERIENCE
Blue Origin, Remote
Technical Designer III (Creo 8.0 / Creo 6.0), Windchill 11.2 PDMLink 2022 - 2023
• Detailing drawings.
• Detailing Tube Assembly Drawings which include Tube Data Table.
Space and Airborne Systems / L3HARRIS Technologies, Rochester, NY 2011 – 2013/ 2015 – 2016 / 2018 - 2021 Mechanical Designer (Creo 4.0 M120 Parametric, Windchill 11.0 PDMLink / Agile) GD&T per ASME Y14.100-2017.
Supporting the Electronics Packaging group. Designed module lifting assembly.
• Heatsink design and redesign. Cable routing for electronics module. Cable fixture design.
• Electronics box design. Cable mounting bracket design.
• Modification of existing designs and generating Detail drawings for Telescope Control Electronics, Sensor Data
Processor, Digital Process Electronics and Modular Processing Electronics. Test fixture design.
• Provided Mechanical Design / Drafting support to Specialty Engineering department in the Design of large
Ground and Space based Electro-Optical Imaging Systems.
• Center Of Curvature Optical Assembly (COCOA) test system interface drawings, large assemblies.
• James Webb Space Telescope (JWST) Transport design proposal.
• (JWST) large assembly and Arrangement drawings, Simplified Representations and Exploded views.
• 3D Cable routing for Actuator Assembly, Absolute Distance Meter, Bolometer Assembly, Sensor Data
Processor and IFPA.
Simplified reps of large assemblies. Swept Blends, Family tables, Interconnect Drawings.
• Detailing of machined parts, Suspension Frame weldment and Pressure Tight Enclosure for cables.
Mentoring direct and contract peers on the use of PRO/E and CREO applications.
Creo/Sheetmetal – Created weldment structure 70 feet tall and 37 feet in diameter using steel plate from
inch to 2 inches thick. Chamber development and many sheet metal parts. Pro/Piping - Gas lines / Cables.
• “I have been impressed with the work you have done for me in the past few months” JWST Deputy Test Director
(Forth position was a one year contract)
(Third position was a one year contract; extended 6 months).
(Second position was a one year contract using Creo 2.0 Parametric, Windchill 10.2 PDMLink).
(The first position was a two year contract using Pro/ENGINEER Wildfire 5.0 and ended due to contract
duration constraints).
SAIC (Science Applications International Corporation), North Charleston, SC 2017 - 2018 Mechanical Designer (Creo 3.0 Parametric M040, Windchill 10.2 PDMLink) GD&T per ASME Y14.100-2009.
• Modification of existing designs and generating Detail drawings for Assault Amphibious Vehicle (AAVP7A2)
• Trouble shooting large assembly and part models with ModelCHECK.
Creating Sheetmetal models with Sheetmetal module.
(This position was a six month contract and extended three months.)
DePuy Synthes companies of Johnson and Johnson, Horseheads, NY 9/2014 - 10/2015
Tool Designer (Creo 2.0 Parametric, Windchill PLM 10.1 PDMLink) GD&T
• Designed a system to operate four concentricity gages from one drive.
• Designed an Adjustable Media Separation unit to fit into an existing machine.
• Modeled prototype of Unique Device Identification (UDI) module which included frame layout, cable and
Hydraulic line routing. Designed multiply mounting features for camera, lights and cable carrier.
• Creating Models, Assemblies, Details, Machined parts, Family tables, Change Notices and threaded parts.
• Created sheet metal anodize rack and oil pan.
• Participated in and passed 3 day GD&T course.
• Created Enclosures using Creo Sheetmetal Application and plastic parts made with 3D printer.
(This position was a twelve month contract and extended.)
AAR Mobility Systems, Cadillac, MI 5/2014 – 8/2014 Mechanical Designer (Creo 2.0 Parametric, Windchill 10.2 Intralink)
• Updating Models / Assemblies, creating models, exhaust line, cable routing and Revising drawings for the
20-Foot 3:1 Expandable ISO Shelter (TFI).
(This position was a three month contract, extended one month)
BAE SYSTEMS (Platform Solutions) Johnson City, NY 2010 – 2011 Mechanical Designer (Pro/ENGINEER Wildfire 4.0, 3D modeling. Windchill 9.1 PDMLink)
• Layout of 3D Cable routing for .50 caliber machine gun in V-22 Osprey aircraft.
• Cable cover design, Assembly and detail drawings of associated parts for cable routing.
• Mentored peers on 3D cable routing.
Pro/Sheetmetal. Pro/Piping. GD&T per ASME Y14.100-2004.
(This position was a six month contract)
BAE SYSTEMS (US Combat Systems) Thomasville, PA 2008 – 2009 Mechanical Designer (Pro/ENGINEER Wildfire 3.0, 3D modeling. Windchill 7.0 PDMLink)
• Designed shock and vibration mounting cradles for Electronic equipment.
• Design of High Voltage Power Distribution Box.
• Supported the Electrical Product Development Team for the M109-A6 Paladin Self Propelled Howitzer and
Field Artillery Ammunition Support Vehicle (FAASV).
• Modeling Electro-Mechanical components.
• 3D Cable routing for GPS, Navigation and Crew installations in the FAASV.
Weldments and mounting brackets.
Pro/Sheetmetal. Pro/Piping. GD&T per ASME Y14.100-2004.
(This position was a six month contract, extended six months and ended due to funding)
LOCKHEED MARTIN CORPORATION (Maritime Systems and Sensors) Manassas, VA 2005 – 2008 Mechanical Designer (Pro/ENGINEER Wildfire 2.0/ SDRC I-DEAS 9 series m3, 3D modeling)
• Engineered and Designed air flow seals and plenums for a 35 pound power supply mounted in an airplane.
These seals were mounted on a door and wall and designed to follow the movement of the power supply
(mounted in a cradle on vibration isolators) for inch in every direction.
• 3D Sheet metal design of Electronic enclosures. Fixtures to modify equipment in the field, cable
assemblies and I/O Panels. GD&T per ASME Y14.5M-1994.
• Designed antenna mounts for Humvees in mirror area and on bumpers.
• Checked layouts, assemblies and drawings for clarity, completeness and conformity to standards, procedures
and specifications.
• Plumbing layout for cooling system.
• Packaging of airborne electronics and equipment.
• Generating original concepts and evolve them into functional detailed designs.
• Pro/ENGINEER Wildfire 2.0, (Windchill IPDE).Creating models, I/O Panels, Assemblies and translating
them into drawings. Cabinets, Cooling System and Weldments.
(This position was a six month contract which was extended).
LABORATORY for LASER ENERGETICS, Rochester, NY 3/2005 – 5/2006 Mechanical Designer (SDRC I-DEAS, 10NX Series m2, 3D modeling)
• 3D/2D to produce a drawing package for an Optical Module and Enclosure assembly.
• Provided critical design support to Mechanical Engineering group.
• Conducted tolerance studies to ensure proper fit and function of parts.
• Assigned tolerances, both conventional and GD&T per ASME Y14.5M-1994.
• Provided support for development of prototype parts, including models, machined parts and sheet metal.
• Assisted in the establishment of overall design requirements from project outlines and specifications to create
details of conceptual design nature.
• Take components from modeled assemblies and flush out details. Able to calculate tolerances, dimension out
parts and turn models into drawings.
(This position was only a three month contract. Accepted a position at Lockheed Martin)
AIRSEP CORPORATION, Amherst, NY 2003 – 2005 Quality Assurance / Final Inspector / Draftsman
Transitional position (Contract to hire) intended to support Engineering with AutoCAD 2000 drafting and 3D
Modeling work of Industrial and Medical air separation equipment.
(Left this position to get into Engineering field at Laboratory for Laser Energetics)
EDUCATION
National Electronic Technical School, Buffalo, NY
AAS – Mechanical, Electrical and Electronic Design and Drafting.
COMPUTER SKILLS and CAREER TRAINING
Creo 8.0 Parametric Creo 6.0 Parametric Creo 4.0 Parametric
Creo 3.0 Parametric Creo 2.0 Parametric Windchill PLM 11.2 PDMLink
• Training – Update to Creo Parametric 4.0 from Creo Parametric 3.0
• Training – Introduction to Creo Parametric 4.0 – Fundamentals.
• Training – Introduction to Creo Parametric 4.0 – Productivity Tools.
• Training – Update to Creo Parametric 3.0 (M020) from Creo Parametric 2.0
• Training – Introduction to Creo Parametric 3.0 – Fundamentals.
• Training – Piping using Creo Parametric 3.0.
• Training – Introduction to Creo Parametric 3.0 – Productivity Tools.
Windchill 10.2 Intralink Pro/ENGINEER Wildfire 5.0
Pro/ENGINEER Wildfire 4.0 Pro/ENGINEER Wildfire 3.0
Pro/ENGINEER Wildfire 2.0 Geometric Dimensioning and Tolerancing (4 courses)
SDRC I-DEAS Parts Design, Certificate. SDRC I-DEAS Assembly, Certificate.
SDRC I-DEAS Drafting, Certificate. SDRC I-DEAS 8 Update, Certificate.
Engineering Modeling System, Intergraph, AutoCAD 2000, MicroStation
Oracle, PowerPoint, Outlook, Excel, Windows, Microsoft Word, Agile.
Contact this candidate