Process Operator Room

CLINT RAMLAL

Phone: 689-***-****

Address: *** * ******** **,

Kissimmee Florida 34758

Email: ***********@*****.***

CAREER OBJECTIVE

Seeking a position that will utilise my technical skills and work experience to the benefit of an organization that rewards personal development, initiative and growth. WORK EXPERIENCE

Streamline Innovations (January 2023 to present) – San Antonio, Texas DCS/Control Room Operator

Responsibilities include:

• Control Room Operations.

• SCADA Optimization & Troubleshooting.

Black Mountain Sand (June 2022 – October 2022) – Kermit, Texas Dry Plant Board/Field Operator

Responsibilities include:

• Plant Operations and Optimization.

• DCS/Board Operations.

• Controls and System Troubleshooting.

• Safe Work Committee Planning.

MMR Constructors (September 2017-August 2018) - Geneva, Nebraska (Fortigen) Commissioning Specialist/Lead Technician

Commissioning and Start-up of 100 STPD Ammonia Greenfield Facility in Geneva, Nebraska for the Client FORTIGEN. Lead Activities include:

• Review of Pre-Commissioning and Commissioning procedures.

• Line Blowing, Line flushing, Chemical Cleaning, Piping Re-instatement and System Leak Testing. (Alongside Chart Life-Cycle)

• Pre-Commissioning and Commissioning of the Plant Utilities Systems including Utility Air, Water, Nitrogen, Steam.

• Pre-Commissioning and Commissioning of the Natural Gas Supply System. (Tallgrass)

• Pre-Commissioning and Commissioning of the Water Treatment Unit. (US Water)

• Pre-Commissioning and Commissioning of the Package Boilers and associated Steam Headers. (Cleaver Brooks)

• Pre-Commissioning and Commissioning of the CO2 Removal System. (BASF)

• Participated in Catalyst Reduction of the Primary Reformer, Secondary Reformer, Shift Reactors and Ammonia Converter. (HYDROCHEM & CLARIANT)

• Participated in First Production and Ammonia Product to Storage. (DCS and Field)

• Process Optimization and Training of Fortigen Operations Team. (DCS and Field) MMR Constructors (January 2017-April 2017) – Wever, Iowa (IFCO) Commissioning Specialist/Lead Technician

Pre-Commissioning, Commissioning and Start-Up of and 2200MTPD KBR designed Ammonia Production facility on the Iowa Fertilizer Complex for the Client IFCO. Lead the following activities:

• Turn-over walk down activities and certificates reviews from Construction to pre- Commissioning and Commissioning.

• Preparation of Punch lists for the Systems ready for turn-over and ensure Punch lists readiness for safe systems handover.

• PSSR of Process Systems (Pre Start-up Safety Review).

• Review of Pre-Commissioning and Commissioning procedures.

• Participate in daily Pre-Commissioning and Commissioning meetings with representatives from all parties.

• Pre-Commissioning and Commissioning of the Water Treatment Unit (Aqua Tech)

• Pre-Commissioning and Commissioning of the Demineralization Unit (Aqua Tech)

• OASE Handling and Loading to Storage Tank.

• Lube Oil Flushing for all Rotating Equipment.

• Steam Blowing, Air Blowing, Chemical Cleaning, Line Flushing.

• High Pressure and Low pressure Leak Testing.

• Refractory Dry-Out for Reformers, Start-up Heater.

• Ammonia Plant & Equipment Commissioning and Start-up alongside Tecnimont personnel.

• DCS and Field Process Optimization, First Production and Guarantee Test Run. 2013- 2014

Man Forrestal – DTEC PMP GmbH (Venezuela)

DCS/FIELD Specialist

Pre-commission, commission and startup of an 1800MTPD KBR designed Ammonia Production facility for the ‘client’ Pequiven. Lead the following activities:

• Pre-startup activities including process loop checks, line punching, catalyst loading, line flushing, line blowing and steam blowing of steam and process headers as per KBR Startup SOP’s.

• Together with equipment vendor, pre- commissioned, trip tested and startup the facility’s steam turbine driven Feed Gas Compressor, Process Air Compressor and Primary Reformer Induced Draft Fan, Synthesis Gas Turbine and Compressors and associated lubrication system turbines and pumps.

• Conducted refractory dry out of Primary and Secondary Reformers as per KBR Startup SOP’s.

• Pre-commission, commission and startup of BASF designed aMDEA CO2 removal system which includes line flushing, chemical flushing and medium loading of system related equipment.

• Lead the Pequiven Field Operations Team in Startup and normal operation of the Ammonia facility as per SOP.

• Conducted Catalyst Reduction to the various catalysts on the facility as per startup SOP.

• Assisted in carrying out chemical cleaning of plant Steam Headers and associated piping.

• Effectively execute process upset emergency procedures both in the field and DCS as per designed SOP’s.

Worked alongside: KBR, MHI, Dresser Rand, Flowserve, Linde, Siemens, Emmerson, Tucker, ABB.

2012-2013

British Gas Trinidad and Tobago (BGTT)

Field Technician on the Dolphin Platform. Knowledge and participation in:

• 2012 shutdown, Relief and Blow down upgrade, preparation of shut down schedule, equipment and process isolation with respective permits and associated representative drawings.

• Commissioning of new Fire and Gas System and Training with Vendor. (ABB)

• Pre planning for Star -Fish upgrade

• Participated in introduction of E-permit to work system EPTW and Global Work Management System GWMS

• CAMS assessments, online modules, rules to live-by.

• Attended Frontline Leadership Academy workshop FLOA.

• Shut down planning, 5y’s, Production reports, monthly reports, audits, LOTO, registers

(emissions, man on board, equipment online and several others).

• Conducted CRO duties including safe operating, startup and shutdown of facility

• Conducted field operations activities which include routine operations, equipment monitoring, troubleshooting and safety equipment checks and operation.

• Actively involved in near miss reporting, condition reporting, behavioral based safety observations and observation intervention compliance and contractor management.

• Participated in work permit and register audits thereby supporting the safety standards of the asset and that of my Lead.

• Actively involved in preparation of permits and associated JHA, Tool box meetings and job tracking.

2008-2012

Industrial Plant Services Ltd. (IPSL)

Process Operator 2, duties and responsibilities involved:

• Pre-commissioning at the Melamine Plant of the AUM Complex. Includes vendor training and SOP

• Pre-commission, commission and startup of an 1800MTPD KBR designed Ammonia Plant of the AUM Complex. Participated in the following:

Pre-startup activities including line flushing, line blowing and steam blowing of steam and process headers as per KBR Startup SOP’s.

Commission De-Mineralization Plant, Package Boiler, Nitrogen Storage Unit and associated Off site Units as per design SOP’s.

Together with equipment vendor, pre- commissioned, trip tested and startup the facility’s steam turbine driven Feed Gas Compressor, Process Air Compressor and Primary Reformer Induced Draft Fan, Synthesis Gas Turbine and Compressors and associated lubrication system turbines and pumps.

Conducted refractory dry out of Primary and Secondary Reformers as per KBR Startup SOP’s.

Pre-commission, commission and startup of BASF designed aMDEA CO2 removal system which includes line flushing, chemical flushing and medium loading of system related equipment.

Startup and operate the Ammonia facility on the DCS, and when necessary, in the field as per SOP.

Conducted Catalyst Reduction to the various catalysts on the facility as per startup SOP.

Assisted in carrying out chemical cleaning of plant Steam Headers and associated piping.

Effectively execute process upset emergency procedures in the field as per designed SOP’s.

• Member of the Emergency Response Team

• Actively involved in permit and JHA preparation, near miss and unsafe condition reporting

• Involved in safe chemical handling and transfer

• Shutdown planning and shutdown activities and commenced development as a DCS operator

• Attended numerous safety and process trainings. These include: Advanced Fire Fighting, Confine Space entry, Numerous vendor trainings specific to commissioning, Boiler operations, Pump training, Chemical Trainings with Ashland and Betz, BASF Amdea Training, Advanced First Aid, Work Order Training with Maintenance Dept. 2008

Petroleum Company of Trinidad and Tobago (Petrotrin) Refinery Operator Trainee

• Participated in the Co-op Program offered by UTT in collaboration with Petrotrin (2- months)

EDUCATION:

2015

Programmable Logic Controllers at SBCS Trinidad.

2015

Project Management at SBCS Trinidad.

2010

Mechanical Maintenance at The National Energy Skills Centre, (NESC). 2007

Process Operations at The University of Trinidad and Tobago, (UTT). 2000-2005

Caribbean Examination Council (CXC), Full Science Certificate. CERTIFICATES

• Mechanical Maintenance from NESC. (2010)

• Operator Certificafion with IPSl alongside City and Guilds.( 2011-2012)

• Tropical Offshore Safety Training TBOSIET.(2012) Falck Neutec

• Coxwain Offshore Life Boat.(2013) Falck Neutec

• Emergency Response Team Member ERT.(2012) Falck Neutec

• Advanced Gas Tester AGT.(2012) Falck Neutec

• Benzene Tester.(2012) Dolphin Platform

ACTIVITIES:

Member of the Buen Intento Sports Club

Member of the New Calvary Tabernacle Youth Group

Hobbies include football, cricket, fishing and auto mechanics. SOFTWARE CAPABILITIES:

Microsoft Office Suite

STRENGTHS:

Highly motivated and ambitious individual with a desire to take responsibility and deliver results. A great team player but also capable of working individually. Excellent interpersonal skills, high proficiency in preparing reports and communications. REFERENCES:

• Aaron Karim- Commissioning Specialist at MMR Constructors Contact- *****.*****@*****.*** ; Tel: +1-319-***-****; +1-868-***-****

• Dev Maharaj- E+I Engineer at MMR Constructors

*******-**********@*******.*** ; Tel: +1-319-***-****; +1-868-***-****

• Rennie Surujbally- Commissioning Manager at MMR Constructors Contact- ******.**********@*****.***; Tel: +1-319-***-****; +1-868-***-****

Contact this candidate