Field Operator Maintenance Technician

EGWUZORO PRINCE ANAYO

Contact Address: Phone No: +234**********

** ******* ******, +234**********

Oroworukwo Town, Email: ******.*****@*****.***

Port Harcourt, Rivers State

Nigeria.

Career Objective:

A Mechanical Engineering graduate with excellent technical and engineering skills with years of experience. Looking for a challenging work in an environment where both education and technical competencies would be applied. I desire further development of my competencies and attain the stature of a resourceful professional in an organization with opportunities for career advancement. Willing to contribute towards the actualization of your company’s organizational goals through sincerity and hard work and complete compliance to standard safety procedures.

Skills and Abilities:

Microsoft Office Skill

Ability to work with minimum supervision

Ability to work under pressure and adapt to any work environment

Effective verbal and written communication skills

Excellent problem solving and analytical skills

Good leadership skill

Excellent Team Player

Personal Data:

Date of Birth: 02 Jan, 1982

Sex: Male

Marital Status: Married

Origin: Imo State, Nigeria.

EDUCATION:

2006 – 2008: INSTITUTE OF MANAGEMENT AND TECHNOLOGY,ENUGU STATE.

Higher National Diploma (Mechanical Engineering)

2003 – 2005: INSTITUTE OF MANAGEMENT AND TECHNOLOGY, ENUGU STATE.

National Diploma (Mechanical Engineering)

1992 – 1998: HOLY GHOST SECONDARY TECHNICAL SCHOOL UMUAHIA ABIA STATE.

Senior School Certificate Examination (SSCE)

1986 – 1991: ST PAUL'S STATE SCHOOL 1, DIOBU – PORT HARCOURT.

First School Leaving Certificate

TRAINING AND CERTIFICATION:

2022: TOLMANN DEEPWATER SURVIVAL TRAINING CENTRE

(SMTC GLOBAL) Basic Offshore Safety Induction & Emergency Training with Compressed Air Emergency breathing System (CA–EBS)

(OPITO Approved Course, Code 5700)

(BOSIET CERTIFICATE NO: 3869570018022221017)

(CA-EBS CERTIFICATE NO: 3869590218022221018)

Safety Induction, Helicopter Underwater Escape Training (HUET),

with EBS, Sea Survival, Fire Fighting & Self Rescue, First Aid & Hypothermia.

2012: SCHLUMBERGER EQUIPMENT PRESSURE TEST CERTIFICATION

(IN HOUSE TRAINING)

2012: SCHLUMBERGER WORKSHOP SAFETY PRACTICE LEVEL 1 & 2

(WORKSHOP PRACTICE)

2012: SCHLUMBERGER OILFIELD TRAINING (WORKSHOP PRACTICE)

2018: -NLNG PRE-BOARDING CERTIFICATION TRAINING

- Work at Height competence Training,

- Piping and pipe certification Training Schlumberger, Port Harcourt, Nigeria.

- Valve maintenance Certification

- Well fluid oil field training.

- First aid Work- (Nigeria Red Cross) Ref: NRCS/FAW00508

- Control valve maintenance & overhaul Training

WORK EXPERIENCE:

MARCH,2022 Till Date: SCHLUMBERGER LIMITED

Dept.: Well Testing / Maintenance

Position: WELL TESTING SENIOR OPERATOR – (Well Testing in Various Fields) - (CONSULTANT)

Duties:

Operates well test equipment during well testing operation

Assist to in rigging up of well test equipment

Carry out preventive and corrective maintenance on surface well test equipment

Piping, pipe maintenance and certifications

Carry out equipment pressure test and certifications

Maintenance and repair of various kinds of Valve use in surface well testing operation.

Perform other assigned duties and routine check of equipment

Assist to execute jobs successful according to client design and specification.

Assist to initiate disciplinary action when necessary on location with crew or assigned personnel with field service manager guideline.

Maintain and repair product line equipment as needed.

Promotes company approved safety and operational policies and ensure that both company and client safety objectives are achieved.

Mobilization of equipment for onshore and offshore operations and client safety objective.

June 2021 Till Date: EXPRO SAUDI ARABIA

Dept.: Well Testing / Maintenance

Position: Mechanical Maintenance Supervisor/SENIOR FIELD OPERATOR - (CONSULTANT)

Duties:

Carry out Preventive, Corrective, Risk-based and Condition-based Maintenance on Well Testing Equipment such as Test Separator, Choke Manifold, Oil and Gas Manifold, ECS, Debris Catcher, Surge Tank, Well Head descender, Sand catcher, Surface Safety Valves, Oil diverter, etc.

Carry out Repairs and Re-installation on various kinds of valve.

Ensure the maximum efficiency and availability of Production, utilities and related facilities at optimal cost and under satisfactory conditions of quality and safety.

Carry out Pressure Testing on Well Test Equipment.

Make a comprehensive, signed and stamped Report on the Equipment carried out Maintenance and Pressure Testing.

Attend general HSE Workshop Meeting and Last minute Risk Assessment Meeting.

August, 2021-EXPRO TRAINING AND CERTIFICATIONS (AGORA Training Centre) Certificate No: 2109253.

*Basic plus CPR, AED first Aid for Adults

*Basic Fire Fighting and Prevention

*H2S, SCBA Level II

*Pressure Testing and Fitting Course

*Work Shop Safety Training Level III

*MAINTENANCE COMPUTENCY TRAININGS.

Feb. 2019 Till April 2021: BAKER HUGHES SAUDI ARABIA

Dept.: Coil Tubing / Pressure Pumping Services

Sub Segment: Reliability (Maintenance) with SAP NO : 281575

Position: Maintenance Technician / Senior Field Operator IV -(CONSULTANT)

Duties:

Interpret Coil Tubing Units Schematics, think and act in a logical way where the system goes down. Conduct basic system tests.

Analyze Open and closed loop injector circuits. Analyze reel drag and traction circuit system. Set up procedures.

-Repacking of Reel Swivels. Repairing, Repacking and Re-installation of traction and tension cylinders. Removal, Inspection and Re-installation of the Injector blocks and chains. Checking and Recharging of the accumulators. Repacking and Repairing of the Hydraulic Motors. Replacement of gauges, Inline filters (Supply and Return), Quick connectors, seals, Booster Pumps, Injector Chains, Hydraulic filters, Gear oil Filters, Engine oil filters, Sprocket and Sprocket bearings, Sprocket Motor, Damaged Hoses.

-Carry out Chain elongation which has a limit of 1.5%. Refurbishing of Batch mixer, injector Hose Reel. Carry out Preventive and Corrective Maintenance on Coil Tubing Equipment such as: Power Pack, Injector Head, Control Cabin, Tubing Reel, Hydraulic Hoses, Hydraulic Hose Reel, N2 Pumps,etc. Mobilization of Equipment for Onshore and Offshore Operations. Operate Nitrogen Pumps, Assist in rig up, Operate coil tubing equipment, etc.Attend general HSE workshop meeting and LMRA last minute Risk Assessment meeting.

2018 -NIGERIA LIQUILIDIFIED NATURAL GAS LIMITED.

CONTRACTOR: PLANT ENGINEERING ENERGY LIMITED

Position: Valve Maintenance Specialist/Night Shift Supervisor

(CONSULTANT)

Attached Contractor: Emerson Automation Solution

Project/Client NLNG Trained 5 and Trained 2 Valve Maintenance Service-VMS Shut down

April-May and Oct-Nov, 2018

MAINTENANCE OF 72”, 66”, 56”, 42”, 30”, 26”, 24”, 18”, 16”, 12” and 4” triple offset Vanessa butterfly and gate valves. maintenance of Biffi valve activator.

Attend general HSE workshop meeting and LMRA last minute Risk Assessment meeting.

Delegate responsibilities for the day among personnel base on areas of specialty/Strength/technical know-how potential risk/hazards from the task at hand are identified and mitigation are put in place. Sort kits/spares for the task of the day are notified on our task and the assistant needed.

Intermittently improvise safe techniques in resolving maintenance task/ challenges

● Activities are grouped as complete overhaul, partial overhaul and (instrument panel) Accessory change out (CO).

Replacement of instrument of instrument panel accessories such as relief, pilot & solenoid valves, flow restrictor, filter regulator, quick exhaust, positioner, limit switch, tubing, dust excluder.

Partial overhaul activities include Accessory &Actuator Change out such as replacement of gland packing of bushings, gaskets, O-rings, seals, opening & cleaning up barrel & applying moly Cole (grease), opening up & greasing yoke compartment.

Complete overhaul activities include the above and the following: Striping the valve completely, removing the stem, bearings/ bushing, disc, keys, retainer ring, cleaning and replacement of valve worn kits.

Follow up on tests done on the valves such as leak tests, bubble counter test, stem run-out test, calibration

March. 2017 WELL FLUID SERVICES LIMITED

Mechanical Maintenance Specialist/Well Testing Senior Operator

Duties:

Operates Surface Well test/production equipment such as: Flow Heads, Choke Manifold, 3- Phase Separators, Surge Tanks, Pumps Compressors, Oil and Gas Diverter Manifolds, ESD Panel & Stations, Gas Scrubbers etc.

Set and managed separator pressure and level to suit the operation. Ensured all safety rules are adhered to during operations.

Rigged-up all well test/production instrumentation (based on rating specification) on the wellhead, separator, data-header, Surge tanks and other required positions.

Manually acquired well test & production data during well testing and extended testing (EPF).

With the aid of other well test personnel, I carried out Combined Meter Factor (CMF) for meter proving and oil shrinkage.

Sampled and measured well effluent properties; BS&W, Salinity, Specific gravity of oil 7 gas, API gravity.

Logged-in sequence of events, and acquired well test data into a DATA PROCESSING SOFTWARE for calculation of oil, Water and Gas rates, GOR etc.)

Prepared Well Test Reports containing well effluent (Oil, Gas & Water) rates and ratios, fluid properties, and testing conditions (pressures and temperatures).

Rigged-down the well test equipment at the end of the test. General equipment maintenance.

I was directly involved in testing the following Heritage Oil and Gas wells.

WELLS

OPERATIONS

ERIEMU (21T,10S,17S, and 1L) etc.

MER Test was conducted on each well

UZERU (5S,16S, 16L, 5L, TS,7L, and 6S)

Gas lifting and Maximum rate test.

2016: PAC-BON INTEGRATED SERVICES LIMITED (Oil & Gas)

Project Supervisor (Consultant)

Duties:

Maintenance and Repair of valve in Egbema Flow Station 3km in Egbema Field, OML 20 (Maintenance and Repairing of Valves)

Carry out Preventive and corrective maintenance on Well head on OML 20 and OML 40, Well 27 and Well 22 in Ekulama 1 and Ekulama 2 respectively.

Carry out Xmas tree valve greasing and valve pressure testing, Annuli valve greasing and valve pressure testing, Annulus integrity monitoring, Hanger seal/monitoring, Gate valve and actuator repairs, Echo meter liquid level detection(Optional), surface control subsurface safety valve wash(SCSSSV), Basic repair capability. Carry out general Maintenance on well head on different locations both onshore and offshore.

Replacement of Fire Hydrant and Utilities Water Pipes at Egbema West Flow Station in Egbema Field, OML 20.

2011-2012 NATIONAL YOUTH SERVICE CORPS (NYSC -EDO STATE).

Science Teacher

Duties: Chemistry & Physics Teacher.

FIELD OF SPECIALIZATION:

- Well Testing Senior Operator

- Well Head Mechanical Maintenance Specialist

- Mechanical maintenance specialist

- Valve maintenance specialist

- Production Senior Operator

- Project management

- Field specialist

- Hydraulic Technician

- Piping and pipe certification Specialist.

- Coil Tubing Maintenance Technician (Reliability)/Senior Field Operator IV

REFERENCES:

Engr. Tobi Jolaife

Product and Service Delivery Manager

Reservoir Performance, Well Testing

Services

Schlumberger Limited.

********@***.***

Tel: +234**********

Engr. Julio Joaquim

Emerson Automation Solutions

Unit B1/B3, Isando Business P ark,

Cnr. Hulley Road and Gewel Street,

Isando, Kempton Park,

South Africa.

*****.*******@*******.***

Tel: +278********

Contact this candidate