ALLEN WAYNE FRAZIER

***** ********* ***, *** *****, CA 95757 advlr0@r.postjobfree.com 916-***-****

Job Experience

Construction Coordinator, TekSystems-SuddenLink

Jan 2022-present

Administer contractor performance for al projects and ensure compliance to all agreements and assist in various new and rebuild projects. Inspect all construction sites to ensure appropriate quality control on all processes and coordinate with various team to gather all permits for projects. Site visits to check safety of trenching, contractors wearing PPE, hard hats, vests, boots. Ensure shoring is in place when needed and containment is in place for heavy equipment. All holes and trenchers are covered for after hours. Manage multiple construction projects at one given time and prepare construction progress reports for all projects on everyday basis and manage all communication with contractors and project managers. Collaborate with project manager and resolve all queries for construction progress and ensure compliance to all safety procedures at site. Coordinate with material and supply chain management personnel to bid all proposals and evaluate contract work and design all AFE for various projects. Identify all pipeline and access road locations according to various specifications and engineering drawings and ensure compliance with all federal and state laws for various activities. Prepare various documents for all implementation of activities and ensure approval for same and assist to distribute all final documents. Participate in various project meetings and maintain records of all construction dates and project costs. Assist construction manager and prepare schedule for all projects and assist in close out process and ensure appropriate filing of all paperwork.

OSP Inspector, ITC Services

April 2017-March 2020

Acts as a liaison between the Verizon/ITC, contractor, city and all other workgroups that are involved in the construction project. Oversees, inspects and monitors field work which includes excavations, boring, placement of conduit, hand-holes, fiber cable installation, grounding and restoration of all work areas. Completes all documentation for associated inspection work, including redlining of As-Builds. Communicates scheduling and scope changes with City and contractors as required. Participate in all Contractor safety and pre-con meetings to ensure compliance with safety, standards and work procedures. Performs oversight and inspection of construction projects, Integrity Management digs, potholing and other work as required. Performs direct oversight of Contractor to ensure compliance with job drawings, specifications and environmental protection measures, erection of temporary facilities such as fences and other public safety items, site work, excavation, backfill, site restoration, lowering of pipe, unloading and handling of piping materials, pre-excavation, Ground Penetrating Radar and electromagnetic utility location, compaction testing, and line markers. Maintains all required Quality Assurance/Quality Control and as-built documentation on site. Turns over timely, legible, complete, and error-free to the as-built mapping team at the end of the project. Maintains public and employee safety on site always by promoting a positive safety culture, exhibiting an absolute commitment to safety for self and others, and by ensuring all applicable safety rules, regulations and standards, including PPE, as followed.

Damage prevention/Safety Canus/ TULSA

May 2012-April 2017

My primary duties as stand by inspector is the protection of PG&E pipeline and other utilities in Northern California and surrounding areas. Stand by inspection is to maintain PG&E regulations while PG&E employees and contractors were installing or repairing gas line. Had to use tape measure for depths and sizes of bell holes, use of measuring wheel to obtain distance of pipe being installed or repaired. Confirm with job site prints and maps. Was also on site for 3rd party contractors that were working near or actual exposed transmission line, anytime excavation was within 5’ for digging and 10’ for boring. I had to make sure contractor would hand dig or use vac truck within 2’ of gas line. When showing up on site I would confirm PGE right of way (ROW), see what other utilities were near or in PGE ROW. Protection is following PG&E regulations and keeping all mechanical digging 2 feet away from pipeline when exposed. Before line is exposed confirm PGE ROW for property and other utilities such as SMUD, waterlines, telephone, etc. Line is potholed with a hydrovac or hand digging. Other duties include noting of the condition of the coding of the pipe and the pipe itself; pitting, gauges, corrosion, etc. Making sure contractor has all documents before job begins; such as USA, permits, pre-dig forms, etc, along with ensuring PPE is followed; hard hats, vests, glasses, etc. Before any digging, calling PG&E gas control and give them a location and line number of pipeline. When contractor is digging a hole I ensure all excavation procedure of installing shoring at 4 feet, air monitors and ladders are followed. Also ensure all other safety measures are following in regards to, tripping hazards, pinch points, overhead lines, etc. Use a pipe horn/locator to confirm utilities that have been marked. Train per PG&E first aid and CPR certified. Ability to read prints and plans daily and understanding symbols, colors and language using Microsoft word and excel for inspection reports and time cards. Confirm if traffic control is needed and is set up according to permit plans. At end of day, must make sure job site is safely secured for overnight by covering holes with steel plates or putting up chain link fence around site.

Data Center Tech, CWF

January 2011-April 2012

Contract work for AT&T, Qwest, Tycho, Installing fiber, Cat 5-6, RJ-45, Panduit panels and punch down from applicable cable, work in raise floor and overhead locations. All cables are sewed, verified using a JDSU visual fault locator, fiber is testing using a Noyes AFL optical test kit (CKSM-2 SC), terminated and tagged per TP and Data Center procedures. Install bays, cabinets, panels using anchor kits. Very experienced in cabling to power bay, ground buses, fuses, H-tapping, insulated tools, blankets for safety, crimpling lugs, verifying and terminating all power connections.

Utility locator Golden State Utility

April 2008-January 2011

Locate ad mark utilities for major fiber companies, Time Warner, Level 3, Sure West and private locates, which include gas, water, sewer, electrical, telephone and other utilities, flags and paint. Responsibilities include, being on-site while companies such as PG&E, SMUD, dig near marked utilities, liaison between company and job site supervisors, daily review and revision of engineering prints, which include paper and computer. Ensure holes are shored up, air monitors and ladders are appropriate before contractor goes into hole. USA certified, railroad certified, understanding Personal Protection Equipment. Stand by required when contract are excavating near Time Warner or level 3.

Straw/Locator BTI Trenchless

May 2005-August 2008

Directed a directional boring machine with a location device up to 200 feet vertically, 500 feet horizontally, under freeways and businesses. Duties include: Potholing to locate depth of utilities, calling in underground services, communicating with driller, and set up road traffic closures and detours, installation of gas, water and fiber conduits, tracer wire. When digging trench or bell hole shoring installed at 5 feet per Cal OSHA, air monitor, ladders and PPE all used per regulations. Daily task includes but not limited to jack hammering, and use of shovel. Driving semi-truck and trailer, carrying heavy equipment and water tanks, fork lift and backhoes. Ability to read and understand utility prints.

Electrician MS Development

May 2003-May 2005

Job supervisor and primary electrician. Duties include all electrical, foundations, plumbing, shear wall, windows, and roofing. Oversaw law and codes for residential and commercial building, including coordination of the State of California permits and dealt directly with State inspectors. Performed all quality and unfinished installation and repairs. Dealt directly with customers and supervised 8 employees.

Level 4 Installer ADC Telecommunications

August 1997-December 2002

Acted as liaison between engineering groups from California and Nevada. Discussed coordination of installation and security measures. Performed Central Office Quality Audits. Maintained performance evaluation records for the SIM Project database. Worked with customers to resolve issues. And provided on-site training of ADC Installation and Engineering resources. Installation of telecommunication equipment at AT&T and Pacific Bell Central Offices, throughout California and Nevada. Duties also include reading and changing of floor prints. Supervised and coordinate 10 installation technicians. Experience in installing all superstructures, iron work, ladder rack, earth quake zones and non-earth quake zones. Drilling through concrete (asbestos) and entire installation of electrical work needed, lights, AC outlets for equipment and conduit (AC and Fiber cables), above floor and under raised floor application. Provided overall leadership to entire team on large projects, including overseeing other functional project leaders. Act as an expert advisor and resource to provide internal success criteria including time, scope, budget, quality targets & SLA agreements and projected customer sign off date. Coordinated multiple floor cable runs and electrical testing and power up. Trouble shoot equipment malfunction. Planned and implemented alarm installation on telecommunication equipment such as Lucent, ADC, Lorraine, Tellab, Nortel, Tital 5500 equipment, along with DSX-1, DSX-3, Patch panels Cisco routers, Installation of Bay equipment such as POT bays, Seismic bays (manufactured by B-Line, Hendry, Nortel and Lucent). And ensured seismic standards and regulations are upheld.

Maintenance/FPI Management

November 1994-August 1997

Perform cleaning, housekeeping and/or general maintenance duties for several apartment complexes. Duties include perform loading and unloading materials, moving furniture, equipment and supplies; cleaning outdoor areas; removing debris and refuse from worksites; hauling, carrying, holding and lifting materials and equipment; and cleaning and maintaining tools and equipment.

Trainings

OSHA 30 HOUR CONSTRUCTION CERTIFICATION

TRAFFIC CONTROL FLAGGER

UNION PACIFIC FIBER OPTIC SAFETY TRAINED

REGIONAL TRANSIT TRAINING

CPR/FIRST AID

Education

Sierra Community college, Rocklin, CA

Attended 1986-87

Clark Edward High School, Las Vegas, NV

High School Graduate: 1984

References

Available upon request

Contact this candidate