Patricia L. Williams

***** ******** **. ** ******, MN 55303-4007

Home: 763-***-**** Cell: 612-***-**** E-mail: adviyy@r.postjobfree.com

SUMMARY:

Acquired high degree of skill in precision measurement and acquired better organization skills while working as a Graphic Documentation Specialist in the U.S. Army Reserves. Also worked in Communications, Administration and Supply.

Highly motivated, dependable, detail oriented Quality Control Inspector with more than 28 years of transferable experience.

Upbeat, positive attitude and dedicated to achieving high-quality results.

Ability to read Blueprints, operate CMM, OGP, Micro Vu, Keyence, Profilometer

Performed GDP and cGMP

Computer literate.

Familiar with many different forms of ISO.

WORK EXPERIENCE:

Quality Inspector, Metro Mold and Design, LLC (transferred from MMD Medical) 09/2019 – 08/2020

Performed 100% visual final inspection on parts before shipping.

Measured Length, Width and thickness on Raw Material and used a Profilometer to check surface finish.

Rejected parts as necessary.

Quality Inspector, MMD Medical, LLC (Contract thru Express Professionals), Brooklyn Park, MN 01/2017 – 09/2019

Became permanent on May 14, 2018

Various tools, such as calipers, micrometers, Pin Gages, Tensile Tester, CMM, OGP's and Falcon Vision Systems.

Fill out hard copy of in-process inspection reports.

Raw material and Final Inspections.

Organize and Archive In-Coming Inspection Reports.

Review all paperwork to ensure accuracy and proper GDP was performed.

Trained on Receiving and Lot Acceptance.

Sorting and organizing sample parts in Lectreiver.

Receiving Inspector, Medtronic Cardiac and Vascular Group (Contract thru InfoTree), Plymouth, MN 07/2015 – 09/2016

Use various tools, such as calipers, various styles of steel rules, and Toolmakers Scope to determine product meets established specifications prior to releasing to production.

Handwrite all Inspection Reports (IR) and document all inspection findings.

Write Non-Conforming Material Report (NCMR) when necessary and move parts to NCMR cage.

Archived and prepared hard copy Inspection Reports to be sent offsite.

Quality Inspector, Turck (Contract thru Entegee), Plymouth, MN 06/2013 – 03/2015

Use various tools, to include but not limited to microscope, calipers, gage pins, Toolmakers Scope and Keyence to inspect product received from vendors in order to determine the workmanship meets print specifications.

Required to fill out lot reports in Turck Tools and move product in the system to stockroom using Turck Connect.

Write Non-Conformance Material reports (NCM’s) as needed on non-conforming product, send e-mail to appropriate personnel and move product to MRB shelf. Move product in the system to QC MRB.

Work closely with Buyers and Engineers.

Quality Inspector: rms Surgical (Contract thru MPS Technical), Anoka, MN 09/2012 – 04/2013

Responsible for First Article, Qualification, In-Process and Final inspections of medical products using various hand tools, CMM, Micro-Vu, Contracer and Optical Comparator.

Required to fill out inspection procedures and document all inspection findings.

Print Certificate of Compliance as needed and verify that the proper material was being used for each product.

Review all paperwork to ensure accurate and proper GDP was performed.

Write Non-Conformance Reports (NCR’s) as needed on rejected product, send e-mail to appropriate personnel about rejects and move product to quarantine cage.

Move product in computer system when ready to move to the next operation or shipping.

1 of 3

Patricia L. Williams

15328 Hematite St. NW Ramsey, MN 55303-4007

Home: 763-***-**** Cell: 612-***-**** E-mail: adviyy@r.postjobfree.com

WORK EXPERIENCE (continued):

Production Worker: Creative Catering by Molly, LLC, Arden Hills, MN 01/2012 – 04/2012

Prepared salads, yogurt cups and sandwiches prior to delivery to customer.

Worked as a team member and assisted in clean-up.

Worked by myself many nights.

Frequently in charge of turning off lights and locking doors at night.

Quality Technician, Greatbatch Medical, (Contract thru Entegee), Plymouth, MN 09/2011 – 11/2011

As a Contract Employee at Greatbatch Medical, I worked in a clean-room environment and was responsible for assuring product meets print specifications before and after packaging prior to shipping to customer. Always used Good Manufacturing Practices (GMP) and write Non-Conforming Reports (NCR’s) as needed.

Quality Inspector, Supply Technologies, (Contract thru Entegee), Brooklyn Center, MN 01/2011 – 06/2011

Responsible for inspecting various types of fasteners.

Maintain history of all parts by recording all information required then releasing them in RIMS & MDS prior to shipment.

Reject parts as warranted. Perform Hardness and Embrittlement tests when required.

Quality Inspector, ProMed Molding, (Contract thru Award Staffing), Plymouth, MN 04/2010 – 8/2010

Responsible for assuring product meets print specifications before shipping to customer while working in a clean-room environment at ProMed Molding.

Document all findings. Assisted with Production Inspections as needed.

Layout Technician, In'Tech Industries, Inc., Ramsey, MN 11/2008 - 05/2009

Responsible for Full Print Layouts on new product and measure critical dimensions on samples parts with tool modifications. Assist in other areas as needed.

Receiving QA Inspector I, Cardinal Health (Contract thru Entegee), Plymouth, MN 07/2008 - 10/2008

While working as a Contract Employee at Cardinal Health, I rotated between Receiving Inspection and Final Inspection.

Inspected raw product, to included visual inspections of literature, labels and paper products using standard and computerized inspection processes after receipt from supplier, prior to production and after production assembly.

Responsible for Final Inspection to ensure it is in compliance with the print tolerance specifications prior to shipping to customer.

Wrote NCM’s (Non-conforming) Reports as needed.

Incoming QA Inspector, Boston Scientific (Contract thru On Assignment Lab Support), Maple Grove, MN 03/2008 - 6/2008

Same as previous position at Boston Scientific

Incoming QA Inspector, Boston Scientific (Contract thru Entegee), Maple Grove, MN 12/2006 - 12/2007

Verified revision levels of print, part and traveler in PDM prior to inspection.

Worked on incoming inspections, Correlation Audit inspections, when in conformance with specifications, released product in SAP. When not in conformance, wrote Non-Conforming Evaluation Report (NCE) and moved to MRB cage.

Worked in an environment with Good Documentation Practices (GDP), Current Good Manufacturing Practices (cGMP), and 21 CFR Parts 210 & 211, had control of my own Training binder.

Tools used: Micrometers, Calipers, Luer Taper Gages, Holix & Heidenhain Laser Micrometers, Height Gage, Gage Pins.

Final Inspector, Accellent (Contract thru United Temp Services), Brooklyn Park, MN 06/2006 - 08/2006

Responsible for inspecting medical products using various hand tools and Optical Comparator.

Required to fill out inspection procedures and document all inspection findings.

Fill out Certificates of Analysis and verify that the proper material was being used.

2 of 3

Patricia L. Williams

15328 Hematite St. NW Ramsey, MN 55303-4007

Home: 763-***-**** Cell: 612-***-**** E-mail: adviyy@r.postjobfree.com

WORK EXPERIENCE (continued):

Sr. Receiving Inspector, Medtronic (Contract thru H. E. L. P.), Brooklyn Center, MN 08/2005 - 06/2006

Used various tools, such as microscope, calipers, various styles of micrometers, gage pins, gage blocks, OGP and OMIS, GD&T, to inspect product received from vendors to determine workmanship has met established specifications.

Also required to fill out lot travelers and document all inspection findings into AppStats and LIMS on the computer.

Quality Inspector, Tolerance Masters (Contract thru Strom Engineering), Minnetonka, MN 05/2005 - 06/2005

Worked at Tolerance Masters in Circle Pines in a temp-to-hire position. Did in-process inspections to ensure quality of product.

Did occasional set-up inspection and approved product to run, when in tolerance. Weighed product when required.

Assisted in calibration of gage pins, reorganized Deltronic gage pins, did First Articles and Finals when required.

Used various instruments. Assisted in reorganizing the Quality Department.

Quality Inspector, Dacon Manufacturing, Blaine, MN 12/2004 - 03/2005

Responsible for in-process checks to ensure quality of product.

Did set-up inspection and approved product to run, when it was in tolerance.

Assisted with deburring when necessary.

Used CMM, caliper, micrometers, gage pins, optical comparator.

Set up Sunnens and checked them every morning for accuracy.

Final Inspector, Everett Charles Technologies (Contract thru First Street NW), Eagan, MN 03/2004 - 10/2004

Printed up drawings when needed to do final inspection to ensure product is properly assembled and all parts were in good condition.

Used microscope to check product. Assisted in pull-tests, rework, visual and dimensional inspection.

Helped organize to utilize and make areas more efficient. Served as key liaison with engineers in quality verification.

In-process Monitor/Operator, Synovis IS, Lino Lakes, MN 04/2001 - 12/2003

Do in-process inspection of medical components every hour to ensure quality of products.

In charge of training operators; keeping training logs up to date and assist in other areas when asked.

Operated grinding machines and bench grinders. Inspected and measured products using calipers, micrometers, toolmaker scopes and optical comparator.

Assisted in revising company's Standard Operating Procedures (SOP) manual to reflect tasks performed to specifications.

CNC Machinist Trainee, TCR Corporation, Brooklyn Park, MN 02/1998 - 08/2000

Worked at TCR Corporation in Brooklyn Center as a temp, became permanent in September of 1998.

Worked with both vertical & horizontal Mills and Lathes. Loaded parts into Kitamura, Mori Seiki, Chiron, Wacino and OKK Mills and Tree, Okuma and Hardinge Lathes with Haas. Did SPC charts hourly.

Performed offsets and some minor tool and program changes with "G" & "M" codes.

Recognized as flexible and skilled enough to work in most departments.

Education:

St. Louis Park Sr. High School - Completed 11th Grade in June 1973 / GED - October 1978

Certificates of Completion from Hennepin Technical Center - 18 May 1999

Measuring with Precision Hand Tools – 18 May 1999

CNC Fundamentals I & II – 18 May 1999

Basic & Intermediate Blueprint Reading – December 1997

Basic Math & Shop Math - December 1997

Military:

U.S. Army Reserves - SGT / E-5 Retired 08/01/1999

U.S. Army Reserves - Ft. Snelling, MN Admin/Supply Clerk 09/23/1980 -- 07/31/1999

3 of 3

Contact this candidate