CURRICULUM VITA

PERSONAL DETAILS:

Name : SAILEN MALLIK

NRIC : S7280690E

Gender : Male

Nationality : Singaporean

Contact Number : +65 98517595, +65 63003464

Email Address : advhwt@r.postjobfree.com

Position Applied for : Construction Supervisor

OBJECTIVE:

Seeking a challenging assignment as Construction Supervisor with a reputed company, to integrate domain expertise and technical skills to achieve organization objective.A proactive and competent Supervision, Inspection professional with a Successful career spanning 25 years, in monitoring Welding, Structural, Piping & Mechanical installation Supervisor, Superintendent & QA/QC in FPSO/FSO/FSRU/FLNG/RIG and Topside Platform, oil and Gas in Marine Sector.

EDUCTION/QUALIFICATION

Degree: Diploma in Shipbuilding & Offshore Engineering

Institution: Ngee Ann Polytechnic, Singapore

Passing Year: 2000

Course: Shipbuilding Course

Institution: Ngee Ann Polytechnic, Singapore

Passing Year:1998

A Level (Science)

Institution: Chandpur Government College, Bangladesh

Passing Year: 1992

CERTIFICATION

1.Certification Scheme for Welding Inspection Personal (CSWIP 3.1)

2.Safety Instruction Course for Ship Repair Manager

3.Safety Officer Training Course

4.Ship Building Course

5.Basic Offshore Safety Induction and Emergency Training

6.Workplace Safety and Health Management in Construction Industry

HSE Responsibilities

•Maintaining Safety, Health and Environment is my first responsibility.

•My target is Zero accident in the project in compliance with HSE policy.

•Apply in-house safety rules and regulation.

•Attend/Conduct In-house Safety Induction Training.

•Attend/Conduct weekly/monthly HSE meeting on site.

•Attend/Conduct toolbox meetings and participate in safety tours in the yard.

•Attend/Conduct daily VSCC meeting, highlight unsafe act and unsafe condition and close up.

Year 2020 CORAL SOUTH FLNG (Turret) has received Workplace Safety and Health (WSH) awarded. Moreover, I have 2 years of experience as a Registered Safety Officer appointed by the Ministry of Manpower, Singapore

MAIN DUTIES & AREA OF EXPERTISE

•Supervise the job as per approved procedures, project specification, code, standards & drawings

•Ensure quality of inspected items to meet project requirement and standard

•Review WPS, PQR & Witness for Welder/Welding Operator Qualification Test (WQT) as per standard ASME Sec. IX, AWS D1.1

•Familiar with NORSOK standards, PED, DNV GL class & Equinor (formerly Statoil) Technical Requirement (TR)

•Familiar with of International Standards such as ASME B31.3, ASME 16.5, ASME Sec. IX, ASME V,ASTM, AWS & API

•Review project related ITP, procedures, specification requirements

•Knowledge/ experience about Piping Isometrics, P & ID, General arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials and welding consumables Inspection, review of mill certificates,

•Material verification Inspection of Pipes, Fittings, Flanges, valves, nipples, plate, tubes as per respective materials specifications, Codes, Standards & Client Specifications.

•Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication Fit-up Inspection and welding inspection, visual inspection.

•Monitor and record welding parameter during welding as per WPS.

•Monitor & witness PMI for SS. duplex / super duplex pipe spools weld joints.

•Monitor and witness NDT, which includes UT, MT, PT and RT film interpretation.

•Witness for Pre-heating, post weld heat treatment, Hardness test and review the reports.

•Witness of piping system Line check inspection, Pneumatic Testing, Hydro test, hot oil flushing, Chemical cleaning, Flood test, flushing, pigging & reinstatement, till the final stage of colour coding and valve tagging.

•Review test pack and all inspection reports for final Inspection documents submit to project approval

•Review NDT traceability & final weld summary as package prior to Line check & Pressure test.

•Knowledge of various international codes and standards such as ASME, API, AWS, ASNT, BS, DIN, JIS, NORSOK & ISO code requirements that are applicable to fabrication, installation and testing of storage tanks, pressure vessels, piping, heat exchangers and steel structure.

•Ensures compliance with pressure equipment related regulatory requirements, codes and standards, and recommended practices

•Review, control and ensure the compliance of welding procedures, weld material, welder control, material identification/trace ability, NDE, calibration of IM&T equipment, installation inspecting and testing in line with the project, relevant code and statutory requirements

•Conduct Material verification inspection of various metal and non-metals such as-

•Metals - Carbon Steel, Stainless Steel, Duplex Stainless steel, Super Duplex stainless steel, Al, Cu-Ni and Casting etc

•Non-Metals – PVDF, PP, PE, PVC, ECTFE, FRP, RUBBER,GRE etc

•Inspection & Verifying incoming materials, such as Pipe, Valve, flanges, fittings, gasket & other item in installing on the system.

•Out fitting work: Equipment foundation, Hand rail, Strom rail, Manhole, Vertical ladder, Pad eye, Grating Engine room, pump room & other machinery space.

WORK EXPERIENCE

Date: 1st July 2022 – 30th Oct 2022

Company: Transocean

Position: Snr. Mechanical Supervisor

Project: Deep Water Atlas

Responsibility: Monitoring following the MUD skids foundation fabrication and installation (such as IRJ Hydraulic Umbilical REELER, IRJ HPU and Electro-HYDR Umbilical REELER, RCD HPU and Electrical Controls Skid, Accumulator Rack For DIST, MPD Buffer manifold and Skid, JUNK Catcher, HP controls Meter, Triple Choke Skid and CORIOLIS meter, as per drawing,). To monitoring all the manual operate butterfly vales open and closed freely. (Mud fix manifold, Brine line manifold, Sea water manifold and Drill water manifold) including butterfly valves line checked and pressure test. Clear punch list. Review as built drawings.

Date: 1st Dec 2020 – 30th June 2022

Company: Equinor

Position: Structural Supervisor

Project: FPSO JOHAN CASTBERG

Responsibility: As a part of Structural/Piping team, I am the focal point for fabrication, erection and installation. Monitoring all welding activity. Before start repair, I have checked updated shop drawings. Johan Castberg has number of weld repaired works in hull external and internal tank, bulkhead, compartment and topside module support.

Strictly follow as per Welding Procedure Specification (WPS). Yard has submitted repair plan as per Special, primary and secondary structure. I have checked all the welder qualification and endorse by Equinor inspector. Monitoring incoming material certificate with traceability record and endorse. Checked all welding machine calibration certificate with validation and physical condition. Monitoring daily fit up as per WPS. Witness heat input as per WPS. Review structural and piping FRB (Fabrication record book) and piping test package.

Date: 2nd May 2018 – 30 Nov 2020

Company: TechnipFMC

Position: Structural Supervisor

Project: CORAL SOUTH FLNG TURRET

Responsibility:

Responsible for CORAL SOUTH FLNG TURRET fabrication and erection incharge at Singapore Keppel Shipyard Tuas. Turret is integrated with (Chain table structure, Chain support assembly development structure, Riser deck structure, Upper turret structure and Swival access platform structure) . Study the project specification and to check all the shop drawings and design drawings. Cross check all Shop drawings produce as per design drawings. Witness materials verification as per project specification. Witness mechanical test such as (tensile test, charpy impact). Witness side bend test, Nick break test and hardness test. Witness dimension check and level check before fit up inspection and after weld visual of the block inspection. Witness leak test (tank) and vacuumed test. Witness Ultrasonic test, Magnetic particle inspection and dye penetrant testing performance test. Witness fit up, back gouging and weld visual as Welding procedure specification (WPS). Witness PWHT (Post Weld Heat Treatment).

•Attended daily mass tool box meeting

•Daily Vessel Safety Coordination committee meeting (VSCC).

•Daily progress report submitted to site manager.

•Attended weekly project management meeting.

•Attended monthly Safety management work.

•Surveillance check all the fabrication carry out as per shop drawings and design drawings.

•Surveillance check quality work and compliance with ITP, WPS and Code and standard.

•Surveillance check weld box number (Date, WPS number, welder number, drawing number, fit, weld and back gouging).

•Surveillance check welding consumables.

•Surveillance check preheat temperature and interpass temperature as per WPS.

•Surveillance check fit up done as per WPS. (Root gaps, root face and bevel angle)

•Surveillance check weld leg length and weld profile to meet the drawing and code and standard.

•Surveillance check valid pressure gauge before carryout pressure testing on pipe and tank.

•Attended weekly quality meeting rise up quality issue and close out.

Date: April 2016 to Nov 2017

Company: SBM Marine and Engineering Pte Ltd

Position: Project Superintendent

Project: Ship Repair, Ship Conversion

Responsibilities:

•In-Charge of Fabrication (Structural, Welding, Piping and outfitting) in workshop and onboard.

•Manpower Planning, Cost Control and ensuring zero accident in the project.

•Maintaining Strict Quality control and to avoid reworks during fabrication.

•Weekly progress report submission to Construction manager.

•Ensure all fabrication and construction as per Specification.

•Block Fabrication and Erection and maintain dimension during construction.

Date: September 2015 to March 2018

Company: Gulf Piping Company

Position: Structural Supervisor

Client: Total

Project: Kaombo Lower Turret (North & South), 2 units for Block 32 (Angola) in Abu Dhabi, UAE

Responsibilities:

•Responsible for fabrication and Erection of lower turret as per drawings and schedule.

•To achieve zero accident in the project.

•Conducting tools box meeting before starting every day work.

•Called third party and class for fit up, back gouging and performing final welding visual inspection.

•Prepare preliminary dimension report before third party inspection.

•In-charge of manpower allocation.

•Updating daily and weekly progress report and submitting to yard manager.

•Attending weekly management meeting.

•Prepare as built drawing and submitting to engineering department.

•Preparing punch list and close up.

Date: May 2014 to December 2014

Company: Global Process Systems

Client: M3 (PETRONAS)

Position: Structural Supervisor

Project: FPSO BUKIT THUA

Responsibilities:

•Responsible for Module installation. (HP and LP flare close drain, Gas export compressor, Production of water treatment / utility and Air & Power generation, oil & gas separation, Hazardous &Non-Hazardous open drain, Degreaser, Electrostatic Coalescer and VRU)

•Verified dimension before and after installation of Module.

•Confirm dimension then release for fit up inspection and comply WPS and follow up welding.

•Manpower control, Quality control, daily progress report updating and submission to site manager.

Date: December 2011 to May 2014

Company: SBM OFFSHORE

Client: ENI

Position: Structural/Piping Supervisor

Project: FPSO NGOMA

Responsibility:

In-charge of Conversion project (Such as Lower turret, Marine layer support, Walk way platform and outfitting for fabrication and installation). Study the specification, Master drawings and shop drawings. Ensuring shop drawings to be produced (by subcontractor) as per Master drawings. Highlighting any error to the engineering department, maintaining the project schedule which is to be complied during fabrication and installation. Reporting any delay of works & dimensions to be checked during fabrication erection. Updating progress report to site manager regarding progress of the site on daily production meeting. Conducting Tool Box meeting and attended Monthly Management Committee meeting. Recommending workers for best safety performances award. Verification all Pipe support fabrication and Installation as per drawings.

Date: March 2011 to December 2011

Company: ConocoPhillips

Client: ConocoPhillips

Position: Structural Supervisor.

Project: FSO GAS CONCORD

Responsibilities:

In-charge of Turret Fabrication and Installation. Verifying JIG Fabrication and dimension. To check Materials whether it matches specification and shop drawings. To witness fit up (Proper tack weld) drawings. Produce and match dimension report before and after welding. To Notify different trade (piping, mechanical, electrical and outfitting) for equipment installation to avoid reworks of block erection. To verify all the structure to be fitted and welded as per drawings. Ensuring all the hot works and leak test to be done before release for painting work. Prepare punch list if there is any hot work after painting. Submitting Punch list to the respective Manager. Weekly progress report submission to site Manager.

Date: July 2007 to February 2011

Company: SBM OFFSHORE

Client: Murphi Oil, Wood Side, Shall and ExxonMobil.

Position: Structural/Piping Supervisor

Project: FPSO SAXI, FPSO OKHA, P-57, and Thunder Hawk, Scarve LER

Responsibilities:

•For FPSO OKHA and P-57: In- Charge of Module fabrication Installation (module 01> separation, module 03>export gas compression, module 05>gas lift compression, module 06> flare ko drums, module 07> gas compression, module 08> laydown, module 11>power generation utilities, module 13> LER)

•For New Shipbuilding (FPU Thunder Hawk): I was Structural Supervisor for Fabrication and Erection.

•FPSO SAXI: Turret, Rigid arm and Mooring Fabrication and Installation.

Date: April 1994 to June 2007

Company: KEPPEL SHIPYARD

Position: Structural Engineer

Project: FPSO SAXI, FPSO COSACIS PIONEER, CMA CGM OTTALO, FPSO VAVI, AND REPAIR VESSEL. New Ship Building (Living Quarter, Turret, Cable laying vessel Tyco Reliance, Tyco)

Responsibilities:

•In-Charge of Ship Repairing, Shipbuilding, Ship Conversion. Responsible for liaising directly with client on all hull, Rigid arm, Turret, Flare Tower related matters.

•Responsible for management and supervision of all shipyard structural work.

•Safety Committee member as Keppel Shipyard (Benoi)

•Involved in Project Planning, manpower control, Cost estimation, etc.

•Prepared markup drawings for ship repair.

•Served as Safety committee member at Keppel Singmarine and Keppel Benoi yard.

•To carry out material Verification and request for inspection report.

•To monitoring NDT activities.

•To review AFC repair drawing and contractor shop drawing.

•To monitor safety aspects during fabrication work and installation works.

•To carry out joint inspection with Client and class such as fit up and weld visual.

•Inspection hull testing such as vacuum and leak testing.

•Participated in Safety Improvement Team (SIT) as a leader of the project for (improving method of rubber gasket punching tools.)

•Conducted safety tools box meeting and highlighted unsafe acts and unsafe conditions at the work site.

Reference

Mr. STIG OMA

EQUINOR

advhwt@r.postjobfree.com

Mr Kiran Kumar

BW OFFSHORE

Project Quality Manager

Phone No: 82235745

Mr. Jonathan Reah

SBM OFFSHORE

Construction Manager

E-Mail:advhwt@r.postjobfree.com

Driving Licence

Singapore class 3

UAE class 3

I do hereby declare that the above information provided is true to the best of my knowledge.

Contact this candidate